P2447 after replacing air pumps

Hi I have a 2007 Tundra 5.7 it has a code P2447 secondary air injection pump bank 2 stuck off, I've replaced the both pumps, and switching valve assembly, since I found pump dead and with water in it. After replacing parts I still get code P2447, I've checked pump and all is working and the data looks even on both banks.

 

Did you clear the code after replacing the parts?

 

yes

 

One of the possible causes of P2447 is not enough air pressure from the pump. Try checking the hoses for any cracks or poor connections

https://www.ttundra.com/878/secondary_air_injection_system_pump_stuck_on_bank1_p2444_p2447_.html

 

I have had the SAIS fail on my 2007 2x the first time it was fixed under warranty the 2nd time I got the Hewitt Gen 2 bypass kit and it’s been flawless

 

Does that kit complete the monitor to pass smog

 

Going to check air volume from the pump, then inspect hoses. Thanks for your input.

 

Yes. If you have questions call Hewitt he is very good at answering any questions

 

Update, since I didn't have what I needed to verify how much pressure the pump was producing, I switched the pumps to see if it was the pump. Bingo, I got P2445 instead of P2447 indicating the pump was defective and the problem. Ordering a new pump.