S.o.b fabrication “High clearance rear bumper”

Awesome!! I’ll send you an email.

 

Can this can fit a 2nd gen 2013?

 

Yes sir, fits 07-21 trucks.

 

Alright - did the painful part. Now the wait begins.

 

Dude hell ya. Did you go with front or rear bumper?

 

Rear. I have a Demello front.

 

Nice! Best rear bumper out for the 2/2.5 gens. Measure three times before you start cutting haha.

 

Thanks for the order man! I really need to get a dedicated bumper thread going on here sooner or later.

 

Very pumped! I looked at every aftermarket bumper out there and this one seems to incorporate the best of everything.

What’s the charge for install if we drive out to NM for pickup?

 

Let me talk to my powdercoat guy and see what he would charge for just the bumper. It's been a while since we've done just a bumper with no swingouts. I'll send you an email.

 

Thank you. I’m also good with just spraying it with steel-it - that’s what I did to the front and it is holding up well.

 

I used self etching primer and bedliner spray can on both front and rear and it’s holding up well.

 

Close all the doors at the boat house and just go to town with that shit…

 

Steel it is great stuff. I'll send you a price tomorrow for just the install and the powdercoat and install. The drive over is sometimes cheaper than shipping it. And we're in a pretty nice area for a long weekend getaway.

 

Just made an order for a rear bumper. Glad I found this, it’s depressing trying to search for a high clearance bumper for a Tundra. Almost went with the SSBuilt - but doesn’t have any side protection. I will try to post pics in the future when it’s installed… but I’m not very active on here

 

Plans on making an option for BSM?

 

No sir.

 

Yesssss!

I remember the day mine came in. It was a great day.

 

Jealous! I ended up adding a single swing out to mine.. can’t frickin’ wait!

 

Glad that made it to you!

 

Anyone worried about towing with this - don’t be.

 

That is a good looking bumper!

 

Ya after taking my stock hitch off I’m not worried at all about the strength of these.

 

Does anyone have Coachbuilder shackles on with this bumper? I saw the instructions mention about working your way around the shackle bolts - I’m hoping my CB+2 shackle won’t interfere with the install.

 

The front tips of the frame bracket will fit outside the leaf springs right in front of the shackles. The wide portion of the frame bracket will then rotate up around the shackles.

 

Im hoping so, I have +2s now and will probably get +3s when the bumper gets here to hold me over until new suspension and leafs . Snag some installation pics and some tips if you remember!

 

Here is a quick picture i got this afternoon. You'll want to put the tip of the brackets just in front of the shackles and slide them up at this angle and as soon as you get past this point you can rotate the entire bumper up and around the shackles. You can also see the space around the shackles when it's in place. When you pull the factory hitch off you'll see how you need to manipulate it around the leafs and shackles.

 

How much higher is the hitch receiver in this bumper vs the stock location? I really want to get one of these high clearance bumpers but I want to make sure I can still tow my travel trailer.