What have you done to your 2.5 gen Tundra today?

Remove your oem drain bolt and replace with the Fumoto Valve. There are different options of the valves depending on what vehicle you have and what the orientation of the drain is. Once installed, all you have to do is remove the safety clip and move the lever to allow the oil to drain. I have been using these for about 20 years with no issues what so ever. Makes changing the oil very easy and eliminates the mess from the oil.

 

I climbed through it today First time I've been in it in over a week. Hard to reach things on the far side wall when the truck is parked in the garage, but it's cold, I wasn't opening the overhead, and the backseat is a heck of a pass thru.

 

I feel like this thing is a bit pricey but it really is nice. Super heavy and has a great feel to it.

 

Finally got around to installing the RCI Catalytic Converter shields. I’ve had these for a few months and kept forgetting about them. Also ordered the fuel tank skid - I’ll be sure to post that install in April 24.

 

Get a flight meter on the flyer ^^^^ up there!!!! Action shots!!

 

Made the first payment today! I'll be glad when this part is over...

 

Truck is looking badass bro.

 

Thanks dude. Even when looking for a penny

 

Damn that travel is insane. Money well spent

 

Little video from a good whoop section. Hit this a few times and made some adjustments. This was about 65

https://youtu.be/0VxCAXHWDsQ?feature=shared

 

Just a wash, cleaned er up & put some yellow lamin-x fog light overlays on the OEM LED fogs

 

Did a little tailgating in the AZ desert.

(also tonneau cover)

 

In the same boat. Just got my hood bulge from Sparks after 9 months. Can't wait to install the front end.

 

Installed Coachbuilder carrier bearing drop kit.

 

Filled her up with the lowest price in the last 3 years.

 

Hey - what brand is that step? I could use one…

 

Installed my RCI Skid

 

She was complaining she missed dirt so I hit the back roads today.

 

Now she needs a bath.

 

It’s already done! It amazes me how many places mud hides.

 

Thanks - appreciate it! Off to spend more money…

 

Revamped retrofit project is complete. The new Bullet 2.0 shrouds disable when the headlights come on. The blue demon eyes are wired to the rock lights. I redesigned the turn signals with vertical cut plexiglass. And installed new BiLED projectors.

 

Took a trek out to Vermont today.

 

How it started vs how it’s going.

 

Looking good! Whats the side profile look like with the flares and +25 offset wheels?

 

Best profile shot I have right now.

Running 37x13.5

Everything lines up with the widest part of my sliders.

 

@Hightide looking good! what LED set up did you end up running on your front bumper sensor holes? I'm looking to add a couple and have been trying to ID the right size or at least a washer that will cover the 24 mm hole.

 

37’s?!?! Nice! So beefy looking!

 

These are the ones I originally purchased but they’re no longer available.

YITAMOTOR 23mm Eagle Eye LED Bulb Amber, 12V Ultra Thin Waterproof Turn Signal Light Car Motorcycle Interior Exterior DIY Light, 10-Pack

https://www.amazon.com/gp/product/B07CWQZ212?ie=UTF8

The 23mm is the closest you’ll get and they’re all made about the same.
Wires are thin and some may eventually go out.
Fortunately, the come in 10 and 12 packs.

$14 LEADTOPS Eagle Eye LED Lights, 10-pack DIY 12V Ultra thin 23mm Eagle Eye Bulb Fog Tail DRL Daytime Running Lights Yellow Kit for Car Motorcycle (Yellow, Black)

https://www.amazon.com/LEADTOPS-10-...766-8e97-a484ee44e7ee&pd_rd_i=B01MU7IT47&th=1

$14 CARLITS Eagle Eye LED Bulbs 10-Pack Ultra thin Bumper DRL Fog Lights Motorcycle Light Daytime Running DRL Tail Backup Light Car Motor Marker Lights LED 12V (Black Case, Yellow)

https://www.amazon.com/Bumper-Motorcycle-Daytime-Running-Clearance/dp/B071RG5B6H?pd_rd_w=DSFZH&content-id=amzn1.sym.22d70615-7a4e-4672-b6a1-6181b9d57bf2&pf_rd_p=22d70615-7a4e-4672-b6a1-6181b9d57bf2&pf_rd_r=YMC3WA0BE3HEFBX1NY1V&pd_rd_wg=SiT3o&pd_rd_r=59a35fe3-7df0-4766-8e97-a484ee44e7ee&pd_rd_i=B071RG5B6H&th=1

They’re all made in china so the paint will fade.
Be careful tightening them because You’ll pull the threads away from the body.
I added a washer on front and back.
I painted the front washers with the same stuff I did my bumper with.
That paint has held up a little better… of course.

 

TWSS