What have you done to your 2.5 gen Tundra today?

Just copy the picture and paste it into the body of the message. On your computer you can just drag them on.

put up a build thread and share your progress!

 

Thank you for posting. I've been thinking about the gray foxtrots, but couldn't decide between +35mm or +15mm. You might have made my mind to get +35 w 35x11.5x17.

 

+35 to my suprise pokes A LOT. It’s amazing.

 

The 315's help with that for sure. That's the perfect setup but I'll be a little skinnier and 1/2" less poke

 

Bought 35 lbs of 2nd gen Sequoia repair manuals! Wife drives the Sequoia. Largely applies to my 2.5 gen Tundra as well.

 

Also probably has 900% more info than the Haynes Manual. Nice!!

 

Haynes has at least 50% of the book littered with a crucial info like how spark plug works, etc. The rest is how to remove wheel and such. Contrary, opened one of these heavy books and saw a transmission overhaul process!

Yeah, old school paper for old school trucks! I now don't have to pay for TIS access, nor navigate a 7000 pages pirate PDF with no search, nor listen for 15 minutes of junk talks in youtube videos just to hear 5 seconds of info I really needed.

Also paper works even without electricity

 

Stillen is having a 15% off sale for Veterans day so I ordered a new intake...

 

Cool!

 

AAAAAHHHHH, It sounds like you have been down that road too.

 

I can confirm the front ram air portion works great.

 

Well, this was added, no more spacers

 

I have been debating replacing interior bulbs with LED however I’ve had bad experience.

Use to own a 2011 Tacoma and LED swapped the interior lights. Map lights were no issue. Whenever I would turn on the dome light for the back seat within a day my drivers headlight bulb would blow. It was a stock halogen in stock housing.

Very strange and not sure why it would do that so I just stopped using the dome light entirely. Ever since I won’t swap stock lighting with LED. Don’t want to ruin anything potentially with a 45k truck.

Curious if anyone else has ever had similar issues with LED swap outs for stock interior bulbs?

Picture of said truck after I gave it a complete face lift. Never should have sold it. 285k on the dash and never had a major repair. Current truck is my 5th Toyo truck, won’t buy anything else.

 

Finally addressed the stupid chrome trim rings on the console. Took me long enough to getting around to do it LOL

 

Went from this
To this

 

Put in my meso kit last week, great mod.

 

Gave her a bath

 

Here’s my contribution to the obligatory “it’s Saturday so I washed my truck” postings. I used Griots snowflake foam and ceramic speed shine afterwards. I also ordered a pair of superbumps, Jomax sway bar end links and a set of 1.5 Pro Form Fabrications shackles (already have a 2” spacer lift in the front). I think I know what I’ll be doing next weekend

 

Nice upgrade from spacers!!

 

Tried to change my lenses on my @bajadesigns squadrons. Had a screw freeze while prepping which was a pain to get out but I got it and waited for my package containing my lenses to arrive which I have been waiting over two weeks for. When it showed up there was only one amber lense…gonna be riding around looking ridiculous for a minute…bummed out

 

Finally installed the c4 sliders.

 

Big thank you to @ragofabrication for these mounts. Wish I found them sooner before going through all of the silliness to “mount” my unswingable swingcase.

 

Missing 2 t-slot nuts?

 

I was just wondering the same thing.

 

No. Left them on purpose. I can pop the whole circus out quickly if I need mulch or stone or …. It’s sturdy enough with just the 1 each.

 

Some of the last actual published manuals from Toyota

 

Did you change steering wheels? Any links to where you got it?

 

Nice! What brand and where did you get?

 

I first bought the ones from Amazon…..garbage. Ended up ordering VLeds, expensive but worth it.