Leveling 22 Platinum with AVS/Air

Moved on from the Westcott kit. Kept the rear arms though. Did a Body mount chop and AVS delete. Added the king 2.5 all around. Next up Icon rear upper and lower links and adjustable track bar and front and rear bumpers.

https://www.instagram.com/reel/Cxgtay7rX65/

 

Here’s a still shot of the current stance.

 

Well hot dang that’s a beautiful set up you have underneath! The rear bags keeping the ride smooth with the arms all the way up?

 

Looking pretty slick man.

The overall composition of that pic is really cool,so I had to tweak the color a bit.

 

Same with me! However the dealership said 1/2 inch is normal. It has been fine last year and just left it as adjusting one side kept the 1/2 inch difference

 

same! Dealership said within 1/2 is normal. If i adjust one the other follows. Think the margin of error within 1/2 is ok

 

I have the afe arms maxed and I don't find the ride horrendous.

 

I agree. Air in the bags does nothing negative for ride with arms maxed out.

 

To add a note here I have the TRD lift package rear shocks installed. It's not the factory shocks anymore.

 

And you still have Avs/bags? How

 

https://www.tundras.com/threads/leveling-22-platinum-with-avs-air.99893/page-11#post-2961320

here ya go

 

Thanks.

thought the Avs stilled worked but no.

 

I think there are options to keep the AVS but I didn't.

 

If anyone is interested, I will likely be selling the Westcott rear arms and the readylift front 2" spacer lift together in the near future.

 

Why are you selling them? Upgrade mods?
Where in Tx are you located? Might be interested

 

I'm in the Dallas area. I bought the Westcott kit and the readylift kit. I'm using the front Westcott and the rear ready lift.

 

Got it. How much are you selling them for?

I'm in Frisco.

 

I sent you a message.

 

If anyone is interested, https://www.tundras.com/threads/readylift-and-westcott-2-1-lift.132436/

 

@ziznack what Rear arms did you use with the ready lift rear spacer ?

 

I haven't gotten it installed yet, but I will use the stock arms as you don't need aftermarket arms. You can max them out if you want but the readylift has adjustable arms of its own for setting the rake you want, they just go about the adjustment differently. They don't have the arm and sensor disconnected, they disconnect the bar arm.

 

Help anyone that did a Westcott or other air ride adjustment arms I am looking for the stock ones

 

I do but I'm swapping back to stock to put in readylift.

 

That is my exact problem I went to the ready lift now I need stock arms back in

 

I don't know why you have to have stock. Just set them all the way down and use the adjustment on the readylift.

 

Ya unfortunately the ready lift spacers with the Westcott arms gives me just a little too much rake set as far down as you can

 

Oh. Good to know. Did you use the front Westcott or the front Readylift and do you have pics?

 

I did King coils with ready lift block under air bag in rear

 

Nice! Do you have pics of your set up? I am planning to do the readylift 3” lift for the rear bag spacer and then Fox DSC. Would be a similar setup.

 

So did you lose the AVS on the front?