What have you done to your 2.5 gen Tundra today?

Hey Tony... just a thought, and probably no time to go buy some, but if you ever thought of adding sound deading material to the floor boards now would be the time to do it...
BTW my chemo Infusions are going well this weekend just hiccups with getting started.

hope the platform and pet friendly carpet installation goes smoothly

 

You can always just get the three hole mount and put blanks in.

 

There is not enough room for a 3 bank switch block, at least in the orientation I want. You can see the switch, orientation and approximate location just in front of the console

 

nice! don't forget the back wall!

oops, I assumed you were added sound deadening, then I continued to read.

Still, nice, will be worth the effort.

 

Don’t forget what on the back wall? No sound deadening going on

 

my bad, responded before I finished reading.

 

Find a safer place to park at a business or something, and uber from there to the airport. Door dings, B&E, and car theft are too rampant at an airport. Uber is one of the things I'm eager to leave behind as I move to a less suburban environment (in 10 years), but it does have its benefits.

 

Parked in the garage. Never had an issue in the past, and I fly at least once a month or more. Was more tongue in cheek comment than anything.

 

As others have said, sound deadening and now would be the time to do it!!

 

Those were 3D printed by @abomb60

Not sure if he's still selling them or not, but shoot him a DM and see; he was selling them w/either hidden or exposed screw designs.

If he's not doing them anymore and you have access to a 3D printer or know someone that can print for you go to Casey's build @RainMan_PNW and I believe he had original print file available.

Here ya go... Hyperlinks were easy to find!!!!
3D printed switch panel

STL file here


Just note they come raw from abomb (like they would if you had them printed), so you'll need to do a little sanding, priming, painting and sealing; but they come out nice

 

We need some rain so I did my part and washed the truck today.

 

Huh? EBC states the blues are fine for streets, slightly more aggressive with longer wear than yellows.

 

Finally got my BajaDesigns SAE Fogs mounted. Lost 2 at different times due to the fog pockets breaking. Welded on tabs, painted and clear coated.

 

Jeep things

 

Got my blazer//trailer winch bolted to a hitch mount so it can help me rip out a bunch of bushes in the flower beds tomorrow.

 

Disregard that....I was multitasking and not paying attention lol.

 

I am not sure the need for sound deadening in a vehicle that is moving to primary offroad use. That shit is expensive and other things I would rather have

 

Time to take that to Moab!

 

He'll need one of these first...


Holiday Edition ...

@reywcms

 

I got some extras you are welcome to use

 

haha

 

mounted farm jack brackets. Had to file the t-slot tabs in order to slide them past the bolts in the deck rail. Turned out pretty good. Jack is secure and out of the way!

 

Your helper has everything under control.

 

He’s the supervisor making sure daddy tightened every bolt.

 

Truck stuff. Even with digging all the way around these bushes with a sharp shooter and an axe, some of them didn’t want to budge and bogged the 12k winch completely to a halt. One of them I even had the truck in 4lo while pulling with the winch and nothing. Still a ton easier than digging by hand but damn. I hate yard work. Can’t wait to replace this crap with some, low maintenance, rock.

 

Did something different with the truck today. Rented a trailer to haul some brush to brush station. Wasn’t too bad!

 

Yesterday- rewired Noco battery tender plug in and installed spacers for the front of the drivers seat.

Nothing exciting!
Cheers

 

Did you add the SR5 badge to the door? I’m so confused by the badging….my 2021 didn’t come with the SR5 badges on the rear doors but I see some here and there

 

My '20 had them but i removed them. Maybe someone removed yours too?

 

Hmmm maybe