GEN 3 (2022+) Wheels and Tires Photo thread

Thanks your truck looks good.

My truck came with OEM 265 70R 18....Will i be able to fit 20 inch tires on this without lift ? and i am going to change the wheel too

 

^^ Yes you can go with 20” OEM wheels and tires. I have an SR which came with those you have on your truck.
Went with OEM TRD 20’s and it looks great. The ride is very smooth and less “cushy” than the 18” with the oem tires.

Now I have OEM OR 18” wheels with TRD Pro OEM tires and IMO it looks and rides great.

 

Do you have lift on it? Truck looks great with 275/65

 

Just got a 2” level with 295/60/20 Recon Grapplers and new wheels

 

Before & After 35x12.50x18 BFGoodrich KO2’s RWL

 

23' TRD Pro 35x12.5-18 Toyo Open Country AT

 

Looks great! How’s the ride?

 

Westcott installed? Awesome stance.

 

The ride is great no noticeable tire noise if anything changed the lean is less when cornering at higher speeds from the factory tires. It did make the turning radius more than factory tires but the look is totally worth it in my opinion.

 

Much appreciated! No, I do everything myself. Simple install and phenomenal quality. The truck should come from the factory this way!

 

35" Falken Wildpeak A/T HD, 17" Black Rhino Barricades on 2024 Limited with 3" TRD lift

Still rubbing just a bit may need to beef up my suspension

 

Looks great! The stance is perfect.

 

Nice set up, lift or level with those new tires on stock 20’s? I just got my truck and debating on going to 18s or just sizing up tires on the stock 20’s.

 

OEM Bronze w/ Falken Wildpeak AT3W (275/70/R18). No lift yet.

 

What vehicle comes with those bronze bbs rims factory?

 

This is my ‘22 limited off road. just put on Mayhem 17”wheels with Milestar Patagonia A/T 37. Westcott 2/1 level and front UCA

 

I have 1.75" front leveling spacer

 

New AT3 in 285/65/20. 1" front level.

 

According to my local dealer you can add these on at the dealer for Gen 3 Tundra or Sequoia. I wasn't about to pay $600 per wheel so I got them elsewhere.
I wanted to stick to +60 offset so I went with these.

 

Those look identical to the TRD off-road 18s. I'm not so sure about the BBS part...

 

I'm getting ready to buy my first set of tires outside of the factory tires (16.5K miles on them and they're already pretty toast.) I drive in the snow a lot in the Winter months. I'm considering Goodyear Duratracs, Cooper Rugged Treks, and Wildpeak AT3W.

I plan to run a 1.75 leveling spacer up front. Anyone have Winter conditions driving experience with any of those tires?

I've run Duratracs in the past on my Tacoma and been happy with them. I live in CA and that is the Winter tire of choice for CHP, as well.

 

Check the Nokian AT , good reviews and light. A 275/65/20 comes in at 49# a substantial 10 # lighter than its peers.

 

What's the offset on the wheels and where are you rubbing?

 

Yeah they do look a lot a like. And I thought they had a BBS stamp inside but i could be wrong. Either way I’m good with it.

 

That's all that matters! I agree, it's a good looking wheel.

 

Hello everyone. I came across this website while looking for some tires and wheels and wanted to post what I got. My experience was absolutely horrific so if I can help out another soul…

22 Tundra TRD with a Westcott preload collar lift kit. CBI Covert bumper. Re-shoed with 20x9 +20 offset Fuel Flame Gloss Black w/ Red accents and Mickey Thompson Baja Boss A/T 275/65/20. At full tilt either left or right leading outer edge of the tire rubs against mud flaps. Not a big deal but I still don’t quite understand how some are running 35x12.5. Poke is respectable and to me doesn’t scream trashy.

 

Posting to add additional pictures.

 

I have a 2022 SR5. 18"stock wheels. I am looking for AT tires. What is the biggest tire I can put on my stock truck without a lift? thanks

 

I found these sites useful:
https://theyotagarage.com/blogs/2022-toyota-tundra-garage/2022-toyota-tundra-aftermarket-wheel-tire-size-reference-guide#

https://www.tacomaworld.com/tirecalc?tires=265-70r18-275-65r20

 

I am sure this has been asked in other threads but here goes anyway, I have a stock SR 5 2022. I am looking for a bigger stance without a lift. My aging father can barely get into the truck now. How big of an 18" tire can I get away with on the stock rims?
I am looking at the falken AT tires.