GEN 3 (2022+) Wheels and Tires Photo thread

No rubbing so far. Haven't been in a situation where I've fully compressed at full lock but it seems like it'll be fine. More worried about a small flap of fender liner in the rear but that seems good so far too.

 

I will take one for you later today.

 

that looks nice. I have the same truck and color and slo live in Oregon. lol. do you have a lift on there? if so what lift and much lift?

 

Nope, no lift. Did some serious off roading and zero clearance issues. Speedo went from 2mph high to 2 mph low at 50mph. I have a radar detector that displays gps speed anyway. Plus the odometer racks up 4% less miles than before, that's a win

 

Here you go

 

Those of you with non-Pro trucks that put on a set of Pro BBS wheels.. what did you pay for the set?
I’ve been looking for a set just recently but there’s not much to be found online under $2,000-$3,000.

 

$2300

 

Facebook?

 

I like the way this looks what is your set up?

 

Craigslist. They were 2 weeks old with 500 mile old oem falkens

 

Do you have the air ride system and AVS on your truck?

 

Anyone use hankook dynapro xt? Seem like they’d be a good pavement princess tire with an aggressive look. Wondering if they actually are quiet and comfortable. Thanks

 

Yes sir

 

pics! And details how it was done.

 

X2 on this. I have always heard that the TRD lift won't work with AVS and the airbag suspension

 

https://www.tundras.com/threads/leveling-22-platinum-with-avs-air.99893/page-11#post-2961320

That's my post on it. The entire thread has good information.

 

How is the ride with that specific tire size? I have OEM 20” Bridgestone duelers and having terrible issues with them. Looking to possibly upgrade. Is the ride quality better or worse than what came OEM?

 

Westcott Lift for now, Icon Alloy Compression rims 18x9 +25 offset with Falken Wildpeak AT3W 285/75 R18 - have Rokblokz mud flaps at home ready for install.

 

I honestly cannot tell a difference between OEM and this tire size.

 

Can we get a shot down the side to see how much poke you have?

 

Here’s my wheel and tire setup.
18x9 +18
295/70r18 Wildpeak AT3

 

After adding the wheels and tires I threw on rokblokz mud flaps and a softopper.

 

What size tires? And lifted? Looks great

 

Previously stated 285/75r18

“Platinum with most basic suspension”

 

Yup!! Thanks.

 

Yes, Had them rebalanced and it got a little better but still there, 68 mph to be exact, nothing crazy but a lil vibration, you ever figure it out ?

 

My 295/60/R20 AT3’s are pretty heavy but run nice and smooth. The little vibrations do occur but they do go away.

It could be a balance issue and an alignment issue or both. The large and heavy tread is hard to balance way out on the outside of the assembly.

Try rotating them front to back to see if you can smooth it out. It may be a good practice to rotate them more frequently since the alignment might be wrongly spec’d.

 

Yeah. I went to a local Toyota dealer with a Hunter Roadforce wheel balance machine and I specifically told them to balance with lug centric. Smooth as butter now

 

even though we use a hub centering ring and don't use lug centric lugs ?

 

they do look great though...