1st Gen. Lunch Table - General Discussion

Anyone know why PS reservoir lids have the stick?

flushing fluid on moms infiniti (dexron VI!) & the cap doesnt have a stick.



Pretty sure this is the 1st time i've messed with one that didnt have it. (Sometimes its a dip stick, but not on the 'yota).

 

Ha! Found this while hunting for something else. Hoping to get the AAL in today.

 

Dipstick for reservoirs you can’t see through

 

Damn you held off on your lift for almost a year with parts on hand?
I'd have lost my mind.

 

Spray him first - pepper spray with a launcher
Byrna Products

 

So we've tried two different toilets and neither will fit. The back of the bowl hits the wall and won't allow it to rest flat on the floor. I'm assuming we need to go buy one with a 10" rough in instead of 12"? I thought buying a toilet with a bowl that was 4" shorter would do it, but no.

We also switched from an elongated bowl to a round bowl and that didn't work. Suggestions?

 

https://www.homedepot.com/p/America...White-Seat-Included-3378AB128ST-020/206888651

Your hips will appreciate the handicap height. You need a new flange as well. May need to get a closet flange reaming bit. Hard to see in the photo on my phone

 

What's wrong with the flange?

 

something wall hung?
If I have to replace a toilet, I'm going to Canada to find something that actually flows water. These American sippers don't flush the drain lines to my standards.

 

Maybe nothing wrong blurry photo looked like it was cracked

 

The American Standards work well and never get clogged. You can replace the elevated flapper with an earlier model to flush more.

 

tranq it & toss it in the sunroof of that crackhead.

 

Take out the wall.

 

I just picked up a kohler, hopefully I don’t run into the same problems as Erik.
Supposedly kohler is fully coated into the p trap and it’s got a bigger throat than other toilets. I’ll give it a test drive later tomorrow

 

Round 3 huh

 

None. I’m guessing they time out after a while. I’d like to see all the shenanigans you hoodlums have been up to.

 

Yep. The return desk at Home Depot hates us.

 

Us? Shenanigans?

 

Oh, I'm way past that point, but it's a nice though.

"Made in Mexico"
By "American" standard.

Honestly, you cannot beat Toto.

MIL is a designer. Made us get one. I found she's right on two things:

1. Speakman makes the best shower heads, hands-down. Even their water saver heads will beat your ass down.
2. Toto makes the best toilets, hands down. Even the low-water versions flush like a goddamn rocket and blast the biggest shits down the pipes.

I laughed at her because they're more than the American Standard I personally wanted to replace with. I'll never go back.

 

I hate 12” potties, even without kids involved. You f’s who need 12” should exercise more

I’m a big fan of Kohler Wellworth. Comes in round and elongated.

 

Screw 'em. They messed up so much stuff when we remodeled downstairs, including expecting us to walk out with half a toilet because their warehouse shipped three toilet bottoms for three different customers (me included), but shipped no tanks.

"We'll locate it and get it back to you, don't worry"

Yeah, the hell you are. You'll be giving me a refund, because I'm not walking out without a complete toilet, you're not putting me on the hook like that. If you can't even get me a full toilet correctly, how am I supposed to trust you to give a full refund on half a toilet that you didn't fulfill?!

Naw dog. Not today.

 

we might need a bridge builder in ky. Roomba can meet polo.

 

What's your measure from the edge of the wall to the center of the flange? And how thick is your trim, like, how far out does it stand from the wall?

 

Welcome back. A lot of is road tripped to Arizona this year. You should come next year!

 

Shit man, you got a dog and a camper shell now?

Y’all just straight up replaced me didn’t ya?

 

10". So that was our issue. Today I learned.

We went from a $95 toilet to $250. Now the wax seal fun begins.

 

I mean, no call, no show.

 

To the above point from @bfunke though, clean the flange well to inspect for cracks. I don't see what he sees, but easier to fix now than later.

 

Ferguson plumbing supply is worlds better than Home Depot for potties.