1.25in spacers

How did you fix the sway bar issue. I rub on the passenger side sway bar only at full lock. But it’s not much.

 

.75 !?!?! I want those! Did you have to trim the studs?

 

Rock Warrior wheels with Bora 1.25 spacers

 

The studs protrude about 1/8" beyond the spacers on the rear. No need to trim if you run stock wheels or others with the "pockets" between the mount holes. Edit - my spacers are 1.0" and not 0.75"

 

I really like the look of your truck above and I have a Platinum with TRD PRO Suspension and TRD PRO Wheels also.

I am curious though do you only have the .75 spacers in the front or where you able to fit them in back as well? I have seen it mentioned that the back wheels won't fit the .75" spacers and need something slightly bigger.

I also noticed your profile lists them as 1" bora spacers and since I like the look with the 295/70 you have on there I want to make sure I get the right size spacers and wanted to confirm if they are .75 all around. Thanks

 

Sorry, I was in a hurry and had a brain fart - I blame old age. My spacers are 1.0" and not 0.75". I remember the 0.75" spacers would require some stud trimming. I have the 1.0" spacers mounted on the front and rear. The studs do protrude about 1/8" on the rear spacers.