What 17” wheels you running?

Looking to see my options for 17” wheels for my 14’ cm.
What backspacing and offset you guys have?
Any pics would be appreciated. Thanks!

 

There are only a very few 17s out there. Method, Icon, OEM Rock Warrior and maybe XD. Nearly all only offer a 0 offset. OEM rock warriors are a +50. The big brake calipers on the 3rd gens are why the selection is so limited.

 

Recently put this on 17inch Method 701, they are 0 offset which gave me just that little bit of poke I was hoping for so I'm happy with how it came out. They are wrapped with Falken Wildpeaks AT3W.

 

https://www.tundras.com/threads/anyone-running-17-rims-on-your-3rd-gen.23617/

 

https://www.mainlineoverland.com/co...-8-toyota-tundra-land-cruiser-200-series-et-0

 

Pics on truck?

 

https://www.instagram.com/p/BifqNQHHG_X/

 

what size tires ? 285/75/17 ?

 

They are 35s

 

truck looks great. 3/1 kit? CMC? i really need to get my 701s mounted up...

 

17” Icon Rebounds +25 with 285/75/17 (33.8”) Cooper Discoverer AT3 XLTs. Icon Rebound and Six Speed wheels come with +25 offset.

 

CMC, uhmm Kings not even cranked just slapped on straight out the box cause I was too excited haha so it probably won't even 3 up front.

 

i have someone installing that exact tire and wheel setup on my tundra right now. He told me that the back tires won’t fit, maybe trimming will do the trick. Was that your experience? He didn’t sound confident about the trimming...

 

How did it go. I didn’t trim anything in the rear just the front required the trimming.

 

how much poke out did you end up with? What kind size level/ lift kit did you go with? Did you have to do any trimming or mods to make them fit? Thanks

 

I never measured how much they poked out when I had that combo. I had 1.9” of lift using Bilstein coilovers. I removed the front bumper lining.

 

SSW Offroad Apex 17x9 +0 offset

 

Relations race wheels. 17x8.5 zero offset wrapped in 35’s falken wildpeaks

 

Are there any 17s with negative offset for 35s? I have Bushwackers and would want the tire to slightly poke

 

not that I’ve seen but the poke at zero offset is enough for post people haha

 

here's a list of few options out there:

• Kansei KNP 17x8.5 -10
• Kansei Roku 17x8.5 -10 (I run these, I like them, pretty nice)
  
• Fuel Zephyr 17x9 -12 or -15
• Fuel Sledge 17x9 -12
• Fuel Rush 17x9 -12
• Fuel Reaction 17x9 -12
• Fuel Hardline 17x9 -12
• Fuel Crush 17x9 -12
• Fuel Covert 17x9 -12 or -15
• Fuel Vapor 17x9 -12 or 17x10 -18
• Fuel Assault 17x9 -12
• Fuel Shok 17x9 -12
• Fuel Runner 17x9 -12
• Fuel Warp 17x9 -15
  
• Anthem Rogue 17x9 -12
• Anthem Viper 17x9 -12
• Anthem Liberty 17x9 -12
  
• White Diamond W3243 17x8 -10
• Hartes Metal Beast 17x8.5 -6
• Hartes Metal Monster 17x8.5 -6
  
• Vision Manx 17x8.5 -15
• Vision Manx 17x9.5 -18 or -44
• Nomad Convoy 17x8.5 -10
• Nomad Sahara 17x8.5 -10
• Impact 819GB 17x9 -12
• Xtreme Mudder XM-312 17x9 -12
• Xtreme Mudder XM-322 17x9 -12
• KMC KM544 17x9 -12
• GRID GD04 17x9 -12
• GRID GD07 17x9 -12
• GRID GD10 17x9 -12
• XD XD136 17x9 -12
• XD XD137 17x9 -12
• GRID GD11 17x9 -12
• Raceline Avenger 17x8.5 -19

 

Thanks just what I was looking for.

 

Hey guys I had ordered wheels and tires back in November of last year and the wheels are still on back order with no eta. I was updated that I could get the wheels in -12 offset instead of +1. My question is will that mess me up for fitment? I have a leveling kit 17x9 wheels. And 35x12.50 a/t tires for a 2wd 2010 Toyota tundra.the tires I have on my truck now are almost gone so I’m really hoping I can get the -12 offset instead of having to buy used tires for my stock wheels.

 

if you go with the -12 with 35's I would really keep in mind is that you'll more than likely need to do a cab mount chop, pinchweld mod, remove the stock mud flaps, and push the bumper forward with a shim but still might need to trim it. if you're willing to do all that then send it.

I know we have different year model trucks but personally have ran 35s with +28 offset all the way to +5 offset and never needed a cab mount chop, or a pinchweld mod, I did need to remove my mudflaps though, push the stock bumper forward with a shim and remove the bumper liners when I ran it.
I didn't need to do a cab mount chop until I went to 37's on +5 offset but still no pinchweld mod. With the 37s I would have had to really chop up my stock bumper so went aftermarket. Now I run the 37s with -10 offset but also an LT front and the tires stick out a lot but still haven't had to do a pinchweld mod.
Really it almost seems like every one of these trucks is different, what works for one guy might not work for the other and what not. I've kinda just done things and figured out what I could get away with and what just wouldn't work without doing things elsewhere, might not really be the best advice though

 

Thank you!

 

Fuel Vector

 

Rock warriors 305/70/17 MTR



mid travel ADS shock no cab mount chop needed.

 

What size tires do you have ?