3rd Gen Accessory Thread

I really want this since I use nalgene bottles that never fit in any standard cup holders but I'm worried about taking apart the console just to install this. Every time I've done this in the past with other vehicles, either some of the clips break or when you get it back together, something starts creaking or rattling. Anyone have the same issue or have more experience with this kind of stuff that can give some helpful tips to avoid this? I worry cause even in the install video for this product, they mention how they broke some of the clips (granted they removed the console many times but I'm still worried).

 

Is there a dedicated thread for toppers (bed caps, camper shells) for our 3rd Gen Tundras? I’ve found some posts in various threads but am hoping for a single thread that shows pics and thoughts on toppers. I have the tonneau cover but am thinking of looking into a topper. Mostly interested in LEER and ARE, perhaps Snugtop or others, I appreciate your help!

 

That orange looks pretty cool also fwiw.

 

Anybody seen a bed slide for the 3rd generation Tundra yet? A pull out bed slide is on the top of my list but I'm not finding a lot of options.

 

Well then, I guess my search is over! I swear I couldn't find anything a few days ago. Thanks for the link!

 

Here is my leer.

 

Installed the trd marker lights today. I did not want to leave the lights plugged in, will finish hook it up when the auxbeam comes in

 

Better make sure that thing never gets direct sunlight during the summer

 

isnt it anodized billet/alum ?

 

It is...its going to get hot

 

Some would say spicy

 

Nice looking stuff, but why is it all so expensive?
https://www.ajtdesign-llc.com/online-store/Radio-Drive-Mode-Knob-Set-2022-Tundra-BLACK-p555927283 $200 for a radio and drive mode knob?

 

I'm not knocking on it, I was genuinely curious the gen 2.5 knobs are considerably less expensive, I wasn't sure if it was a typo or not.

 

Gotcha

Thank you for the clarification

 

I paid about that for a billet antenna...billet, custom size, made in USA, clear anodizing.

 

Got my windows tinted. I did the Geo shield with 20% on the front windows and 70% on the windshield. The 20% tint matches pretty the OEM in the back. I do see rainbowing when I look out my front windows and windshield with my sunglasses on that I don't see looking out the OEM tint. However the Geoshield is a ceramic tint with a UV and infrared blocker. I'm not sure if the OEM has that?
I don't see any rainbowing without my sunglasses on.

 

I finally found this tie down system. https://versatrax.com/products/versatrax-2022-tundra?variant=43909085888763 I believe this is the best I’ve seen for the truck bed. It is definitely on my list, and I thought I’d share it.

 

That definitely looks good. I was trying to find out if it was 48" between the brackets. I went with the d-rings on the outside of the bed bolts and I'm at 49". With this it may be close. I think you may be hitting the brackets with 4x8 material.

 

You shouldn’t hit the bracket because to my understanding, the bracket sit flush with the top of the ribs. They may have to be verified with them. Hopefully they are in fact flush.

 

@Taikowaza, Look at the yelp ratings for snug top. I ordered one in April. Still not here. If it isn't at the dealer tomorrow, I'm cancelling my order.

 

Nice! I hope they continue to come out with more stuff for the 3rd gen. I have the fob, I need to get caught up with more of the new stuff they have released.

 

I suppose I should upload a photo once in a while.

Bak X4S, been running it since I got the truck in November. Also added the bedrug in March or so. Absolutely love them both. No fitment issues at all on the Bak.

 

In the event they're a part of this forum, stop forgetting about blueprint guys...

 

Looks great! Like your tires too. Working on convincing my wife the stock Michelin's (still on mine) must go, ha.

 

Thank you! It's amazing what new tires do for the looks of these trucks. Once I felt the sidewalls on the OEM michelins, I was glad I made the swap!

 

Man up and tell her what you're going to do! Or just show up with new tires and she doesn't notice like my wife.

 

Wow. We were headed to Walmart and came across this guy with a Mazda B2300. Talk about loaded down. He even had the inside complete loaded up with stuff.

 

Anyone know of these guys? Their products look great on paper but all the pictures are cad renders which makes me pause for a sec. I’m eyeing those beautiful fender flares

https://nytop.store/toyota-tundra-sequoia-accessories-store