WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Yep, bunch of clips and tedious work. Easy but time consuming

 

Would someone be kind enough to run a VIN on a ‘22 I’m thinking of purchasing?

 

I ended up getting one from eBay.. the Chinese stuff but had to do some mods because the light adapters didn’t quite match up.

Not really that bright but looks good. and I’m not really going to need it off-road most I’ll do are some sand dunes at the beach

 

i did it by myself and took about 45 minutes and 3 beers.

It would of taken less time but I was trying to do some shortcuts by not removing all the panels and it ended up taking longer.

I would definitely suggest taking the mustache part off top and bottom as well as the valance that says tundra on the front. Once those are removes it’s not hard.

if you have a friend it would make it way easier

 

If it is a used truck can't you run Carfax report?

 

Francisco,

I polished them with 3M Perfect-it polish, surface prep from Mothers and applied the Adam’s Graphene Ceramic coating.

 

Took it off roading. Tried out the new tires and lift. Pleasantly surprised on it handled the ruts and washboard roads thru the mountains. Set the psi @ 42 for these new tires.

 

Cleaned(gyeon leather cleaner) and put ceramic (gyeon leather shield) on all the leather in the 1794!

 

Do you like those products? I'm gonna run out of the old Lexol eventually and am looking for a replacement.

 

I do. The cleaner does a good job - I had already seen some dirt/grime building up on the bolsters and the cleaner took care of that - when I was done, with both, it has a very nice feel, and the look is that non-shiny satin like finish. I did the gyeon leather clean/ coat on my Audi, and similar results. Even my wife noticed it, and she's not a huge detailing fan, but does like a clean vehicle. The ceramic is said to last much longer, and help keep it from dyes/dirt/grime. Some of the testing using different staining materials after application on youtube is pretty impressive! (saddle tan seats and greys on dash/steering wheel/console/stick shift/door panels.)

 

Cool thanks for the note

 

Did you only do the seats or did you also do dash, center console, dash, etc? I am getting ready to do the same coating on my 1794 but have read some mixed reviews about the leather shield on areas other then the seats.

 

I did the top of the dash, the front of the glovebox area across to the start button and continued on the left of the steering wheel and the steering wheel. Stick shift and boot, console leather pieces, and side leg contact areas on the console. And all the leather on the doors. The headrests, did it all.

Update: Note, this along with vacuuming it all before, took me about 6 hours! it's a lot of leather sq ft!

 

I think all toppers use the same rail. For my ARE I went with Yakima, here is the list of what you need.

 

Surgery begins this week Southern Style Off-road bumper and Diode Dynamics driving lights. 4 month wait but itsss here

 

Well now let's see. 1) Running boards. 2) Bug/stone deflector. 3) Swing-out tool box for the bed. 4) Seat covers. 5) Front and rear dash cam 6) It gets washed weekly. 7) Locking gas cap. 8) Cat shield. 9) 1" extended fender flairs. (Just a little to protect the paint.) Next will be the light bar inside the grill.

 

Is that a drop top Chevelle ?

 

It is an A body haha

It’s a ‘68 Gto hardtop

 

Very nice !! The goat! Ughhh, that’s right the emblem in the fender. How could I miss it.

 

Plugged it in, cant get it to power up (No LED indicator)and not getting any audio. Reach out to beat-sonic for tech support. It's all plug and play and I'm not an idiot, so dont think I'm doing something wrong here. Waiting to hear back on potential troubleshooting.

 

Thanks for the update. Hope you get it running soon.

 

Can you take a close up of where it meets the hood? Just trying to see how tight the fit is.

 

I'm an idiot...turned the gain up and were in business!

 

The post is wonderful but show the Old School that you teased us with!

 

Haha oh that ol goat

 

So..... How's it sound? Assuming since you have a Platinum that you have the JBL system?

 

pictures don’t do it justice. This bumper is the beezneez. I have a filler grill coming to fill in the light bar cut out



I also removed the Rough Country Sport flares. Should be up on marketplace soon.

 

Yolo

 

Dang. It looks so good!

What is this filler grill you speak of?

 

Why did you remove the flares?

following as well