Is it possible to adjust these following features?

1. Automatic Parking Brake while the door is open? While towing, I like to leave the door open and hop in and out as I need to roll forward or back to engage the coupler. As soon as I shift into Drive with the door open, the parking brake engages immediately.

2. Cameras to remain on when I toggle the camera switch? Currently it's maybe 5 seconds and then they disappear. I'd like them to remain on whenever I want. I was towing a skid steer and it wasn't my trailer. Despite the machine over the axels it was bouncing quite a bit. On my next trip, I moved the machine 6" closer to the truck putting more weight on my bed and less of the counterweights over the far end of the furthest axel. That helped 50% but I still wanted to watch it going down the road. The cameras work great but after 3-5 seconds they time out. Is there a way to get these to stay on above certain speeds?

3. On the same point of the camera, when I'm stopped the only view I get is the rotating 360 bird's eye view, but once in Drive I get the 7-10 camera options which is great, but I do not get the 360 cam for this one. Is this normal to limit what we see depending on if I'm parked or in drive? Or is there a way to make all toggle-able in any scenario?

4. Finally, every time I get in the truck the in dash screen comes up to ask me if I want the seat adjusted. Click yes or no. My wife has her settings as #2 but she rarely drives the truck so it always stays on my #1 setting. This one is minor but I'm being asked 10-20 times every day if I want to adjust a seat that is exactly where I want it and have it set to. Haha.

 

Thank you for the thorough, complete reply! Really appreciate all the info.

 

for point 1, that is part of the safety lockout to make sure you don't accidentally run over yourself with your truck. To bypass, shift back into park and then drive again while leaving the door open. Your ECU and communications module will log that you bypassed the safety lockout, and you'll be able to move without engaging the parking brake.

 

this should be stickie somewhere asap

 

Totally off topic but do you know if the Do you want to take break alert can be turned off in tech stream?

 

Vehicle sway warning, means the Tundra caught you swerving. You can turn it off in the LTA settings in the instrument cluster menu.