GEN 3 (2022+) Wheels and Tires Photo thread

I’ve used the Cooper AT3 XLT in 295/70/18 and that’s an amazing tire
Aggresive looking with sidewall teeth,light and Zero noise. I wanted a more aggresive tire so I got the Nitto Recon Grappler but wouldn’t hesitate running the coopers again! Light for an E load rating. 62 lbs

 

295 is unnecessarily wide for my application. I don't care how the tire looks, only how well it works. I've had the Coopers before. They are great tires, but aren't great in snow. I have several friends who really like their Toyos. In 275/70, the Toyos are 52 lbs. The Coopers are 57. Both will work out to about the same total weight as OEM.

 

Yes def all depends on what your looking for…
I’m in Texas. Out here trucks are like Friday night lights lol
Crazy what some of these guys do.
Its a true love they have for them…
It’s fun to mess with them.
Def no snow worries lol
Are worries are will it fit through whatburger drive through and is there storage for are rifles

I like having D or E load rating because I seem to find nails and screws a lot

 

305/70-18's look perfect. What offset are your wheels? 9" wide I assume?

 

Yes I agree with you!
Wheels are 18x9 +20 offset
Here’s the poke
Perfect for me

 

color matched flares for the win, before and after

 

I like it nice job
Amazing something so simple can make such a dramatic diff. Looks great imo

 

Who’d you go through for the fender flares? Thinking about taking mine off, but this looks even better.

 

Rough country sport flares, painted locally

 

Anyone have any experience with dipping your wheels? Have new oem matte black 20” Trd wheels, thinking about dipping to bronze https://www.dipyourcar.com/collecti...key-hyperdip-wheel-kit?variant=39407787704403

 

I have used plasti dip before. This hyperdip is from the same guys and seems to be more specific for wheels so it should be good.
I was thinking of doing my black wheels in the antracite gray. However, I use my truck on construction sites where I sometimes drive through deep sand or mud so I am a bit concerned about that rubbing the dip off. And because of the use my company pays for car washes so I take it through a car wash weekly (I know that's a whole other discussion) but they use a hard bristle brush on the wheels and apply tire dressing, which I know is not recommended to be used on the dip.

If you don't have this type of use (abuse) on your wheels, I would say go for it.

 

Some drip for you all on this beautiful Sunday morning:

 

The dipping seems kinda cool and huge savings…

 

just wanted to add, the fuel flame 6 D823 with candy apple milled tint actually have a slight red tint to the wheel itself. didnt notice it until today while up close cleaning the wheels with a fiber cloth in direct sunlight.

its a deep purple/red color tint to the wheels themselves it looks like.

https://www.color-hex.com/color/52003a

 

Euro driver so what do you think?
Are you happy with it ?
You went 37s correct?
How’s the rubbing?

 

Really not even on the felt in back of the wheel well?
What size rim and offset? Thanks for info

 

Did u cut it off the wheel well liner?
How’s your pike

 

Ok cool thanks

 

It’s crazy to me how some guys hit the sway bar and some don’t
I don’t hit my sway bar at all with
18x9 +20 offset???

 

Getting them installed this morning.

 

If I go with the brass monkey hyperdip route, can I remove the black TRD center wheel cap and add it back after the hyperdip dries?
https://www.google.com/search?q=2022+2023+Toyota+Tundra+Trd+20"+Black+Wheels+Factory+Oem&tbm=isch&ved=2ahUKEwjfz7bAhvj-AhXxFd4AHfNxBq4Q2-cCegQIABAA&oq=2022+2023+Toyota+Tundra+Trd+20"+Black+Wheels+Factory+Oem&gs_lcp=CgNpbWcQAzoECCMQJ1C7B1i7B2CDCWgAcAB4AIABMIgBWpIBATKYAQCgAQGqAQtnd3Mtd2l6LWltZ8ABAQ&sclient=img&ei=-YZiZJ_vIvGr-LYP8-OZ8Ao&bih=929&biw=1920&client=safari&safe=active&hl=en-us

 

Update to the rig.
295/60/20 Nitto recon grapplers. Stock suspension no lift or level kit. No rub at all

Before and after pictures.

 

Falken Wildpeak 285/55R20

 

Falken Wildpeak 285/55R20

 

Maybe I should have gone with 295/60R20 but was not sure if they would fit without a lift.

 

isnt that less than 33"?

why go with that and get Load E, when there are P rated that are bigger and way lighter or load E that are bigger?

or is that wrong, just curious

 

Yes, these are the same as 33's

Are 33 inch tires the same as 285?
A lot of people do not know “are 33-inch tires the same as 285”. They assume that two of these metrics are different.

The answer is “yes, it is”. 285 tires refer to the width in millimeters while 33-inch tires allude to diameter.

 

actually, thats less than 32.5 , while still weighting almost 60lbs

anyway, as long as your happy thats all that matters