Anyone fit a 35" tire for a spare under the truck?

Would like to get my spare out of the bed and in the factory location! Anyone fit it under there. I have Coachbuider Shackles which are pretty fat. Want to fit one of these under there!

 

https://www.tundras.com/threads/fitting-an-oversized-tire-in-the-stock-location.19621/

I cut the brackets that hold the stock tire in place. Fits in there inflated.

 

Deflate the tire and cut the tabs

 

Can ratchet strap it too after deflating

 

Gonna follow,

Gotta 2020 tundra with 35x12.50R18s going on soon.

 

35x12.5 shouldn’t be an issue, I’ve got a 285/75 under there which is slightly taller and it’s at full psi.

I do know that those shackles are beefy, maybe. 295/70 would fit better. After all it’s for temporary use correct.

 

315/70r17 on rockwarrior rims mounted in spare location. I removed the tire guides with a grinder and touched up with paint. I then used stick on expanding foam strips to prevent damage to the tire vs the frame.

 

I have a 285/75-17 (34") and it rubs my Coachbuilder shackles. Drivable but I want clearance so I'm swapping to a steel shackle to be thinner soon.

 

bmw345
Totmacher. With the front tabs removed there should be plenty of clearance to fit up to a 35" spare with our Shackles. The tire winch is always off to the driver side a touch and will need to push the tire over and center it up once its up in place.

 

Got a COOPER ST MAX 35/12.5/20 FITS TIGHT BUT NO RUBBING

 

I cut the tabs off, and added some exhaust heat wrap where it gets close to the tire (hadnt seen an issue before). This is a 285/75r18 Yoko Geolandar on the stock steel spare with Coachbuilder +3s

Edit: I have heard that if you have the TRD dual exhaust or a resonator pipe that it might be harder/not possible to fit the larger tire here