GEN 3 (2022+) Wheels and Tires Photo thread

The 18" wheels should work and you have a few choices with the Toyota wheels and many in the aftermarket. Most guys who go bigger tires are running 18's and 17's as well. I went from 18's to 20's so backwards!

 

Yeah this is how it looks right now
But looking to replace with all terrain tires for now , so was wondering if 18s would work and if i would have to mess with the offset and all that

 

Yes a 275/65 or 70/18 will clear
I ran a 295/70/18 with no lift but I do have TRD SR5 and I cleared without issue bone stock originally
Find something 34.0 diameter with 9.0 tread plus 12.0 or less overall width and you will clear Stock rim.

 

yeah i think im going with
285/70/17 for now
Found some nice method 17s

 

3/1 wescott lift on the sport

 

If you go 17s make sure you tell the shop that mounts them that they need to put the wheel weights on the wheel away from the brake caliper…
It may hit the weights it’s very close

 

Is anybody running 35x11.5x20 tires on stock wheels without a lift or level? Any rubbing issues? Pictures would be much appreciated!

 

literally no one is. make sure you don't check this thread for anything like that.

 

Thanks for the reply. I have searched and haven't seen any.

 

I guess I have
TRD SR5 I ran 295/70/18
Specs are the same even a little more section width then your 35x11x20 and I had zero rib all stock.

 

I'm stuck - I have the wheel size nailed down to an 18x9 +18/20 (offset); however, I'm not sure about the best tire size. I have a 23 Limited TRD off-road, no lift. The tire will be a Toyo AT3... what is the biggest size I can fit without rub?

1. 275/70r18
2. 285/70r18
3. 295/70r18

275, I'm certain, is fine, but 285/295 I can't get a clear answer despite my searching.

 

Here’s your answer 100% true I have the exact same truck. 295/70/18
I had them on before I lifted the truck for about a week driving everyday. Never once rubbed.

 

You ran 18x9 with a +18 offset with those tires with no rubbing? I'm confused because you posted a photo of stock wheels which I believe have a +60 offset

 

I have 295/70/18 on 18x9 with +18 on my limited offroad they fit great without a lift, with a level and even now with a 2” lift. Picture shown has zero lift just wheels on.

 

Can I see some more pics? That looks perfect. I got a blueprint too (I think yours might be?)

 

Yes I’m sorry if I confused you. Yes Sir I ran 295/70/18 on stock wheels with no rubbing. I misread your post because I thought you asked can I run a 285/295 on stock wheels. Now I see you have aftermarket wheels.
My apologies.
We’re do you live. I’m in Texas and there is a store out here that if you order wheels and Tires from them they will give you a free leveling Kit.
Hell I have a RediLift 2 inch leveling kit that I’ll sell you for 100.00. It literally has 200 miles on it. I paid 300.
Only reason I changed was because I found a RefiLift 3/1 lift for 599.00 normally there 899.00 I couldn’t pass up that deal so I purchased it and explained to the wife that I had to do it lol.
Anyway with the leveling kit 295s will clear and look sooooooo much better. Here’s my truck with just the leveling kit and 295s stock wheels but I’ve seen several pics of guys running these with aftermarket wheels +12 to +20 sizes and clearing. Good luck!

 

I’ve got pics posted in the blueprint thread, the mega lift thread and this thread way back a few pages. Here are a couple newer ones.

 

Looking at your top photo - if you drove into that garage with those mirrors un-folded your have nerves of steel!

 

haha it’s 8’ wide door I can get in and out with a few inches on each side with the mirrors open but I do use the overhead view camera and that is a lifesaver it’s the most used feature for me.

 

Whats the wheel/tire spec on this?

 

17x9
0 offset
35/12.5/17
There is an approx 2 inch Polk

 

Cornfed leveling kit coming Monday . They are great with customer support . Just waiting on bilstein to come out with leveling kit but these came with my today

 

Looks like some Recon Grapplers maybe ??? 275/60/18 ???? Lol

 

Close but no cigar
Goodyear wrangler duratracs 285-65-18

 

Welcome to the TE club!

 

Lol we’ll damn I was close. Looking good brother.

Dooky what sizes and offset?

 

Can I ask, with whom did you order the tires from?

My 2023 truck is finally in route to the dealership. I was looking at places to order from, to date Amazon has the best price for the 295/60/20 Nitto Ridge Grappler.

Thanks

 

Would 285s fit my leveled Tundra? Cant decide between those or 275s. I have TRD sport I’m probably going to put Cooper at3 xlts 275/65/20 on it but not sure if they will look too small.

 

Will you measure actual mounted height of those and report back?