22 TRD Pro / Heritage Grille Camera Mount Bracket

That would be great! Thanks.

 

I didn’t hear anything but I would probably need someone to press for me to be sure because it’s in the passenger side by the battery. Did I do anything wrong in the wiring

 

I don't have the wiring diagram for cali raised switches, otherwise I'd be able to help a bit more. If the relay doesn't click, then it's not wired correctly somewhere.

 

Where did you get the "tundra" in-lay on the front of your truck? And what color is it exactly?
Thanks!

 

Different question. Does anyone’s Ali express light bar actually work. Wired mine to be on and skipped the switch and still wouldn’t turn on.

 

@eddiefromcali how did you attach the ABS tabs to the grill frame? Looks great!

 

Self tappers

 

Appreciate it. I think I’ll give it a try.

 

For those of you who have upgraded from a TRD Off road (honeycomb) to the Heritage/PRO grille, would anyone be willing to sell the OEM camera mounting bracket from the honeycomb grille? Or happen to have a picture of that part number? i searched and can not find anything online.

 

I've got ones I designed .. 3D printed .. for sale if you're interested. $25 shipped .. check my thread below!

https://www.tundras.com/threads/for-sale-trd-pro-or-sport-grill-camera-brackets.113612/

 

Etsy links for those that want the TRD PRO or TRD OR Brackets:
https://creatoriq.cc/44L0QFm




TRD PRO:
https://creatoriq.cc/3r85Fuq

 

Any tips. I’m stuck at the block…

 

Anyone know how to disconnect th block heater? I can’t get the front off because of it.

 

The disconnect is in the passenger wheel well you’ll need to open it up to unhook. Trace the block heater cord from the front to the wheel well not the block

 

Silly question but what screws did you use to mount it to the grill? My markers arrived but I didn't want to hack job it lol

Is there a special part number I need for it or is there a screw I just jack from the old grill.

 

You the Goat!!!

 

Reviving old thread…

is there any calibration needed for the camera? Given the camera sits lower on the grill of the pro grill vs TRD off-road I imagine the angle is different, or does the modified bracket (I have the one that came with the Rave kit) take care of that somehow?

 

Seems to depend on the truck. Some have had issues, others have not. Kind of a crap shoot. I think most haven't had any issues, myself included.

 

If you have the right camera bracket it’s good to go.

 

When I swapped out my grille the “heritage” grille included a bracket for the camera and I had no issues whatsoever.

 

I used the Westcot bracket and had no issues with it. Only problem I had was I didn’t have a torx screw driver small enough to move the camera from one bracket to the other.

 

I ran into the same issue, and I ended up using one of those tiny glasses screwdrivers & it worked great. Those screws are so tiny they aren't super tight.

 

Does anyone know the screw size I need to attach the light bar bracket (diode dynamics light bar mount) to trd pro grill? it looks to be the same hole diameter as where camera bracket goes. I have found some pictures online but doesn't say screw size. Here are pictures for reference.

 

Assuming that the DD light bar bracket attaches to the factory mounting points on the TRD grille, it should take the same looking screws that are in the rest of your grille,
90167-50063

can be found on Amazon, here is a 30 pack for $12

$12 Rexka 30pcs Fog Lamp Assembly Grille Spoiler Screw for Toyota 90167-50063 4Runner Avalon C-HR Camry Corolla Highlander Prius RAV4 Sequoia Sienna Tacoma Tundra Venza Lexus

https://www.amazon.com/dp/B07MVZK78V/