AJT TSS relocation users....who still has issues.....looking for testers

Who has the AJT TSS relocation kit and still has sensor errors? I have made a thin ABS cover and I'm looking for a couple of people to test it on theirs to see if it fixes your issues. The top pic is the AJT and the bottom is mine.

 

I'm going to pull my AJT cover (I had a machine shop flycut the face) and look for any inside material that is messing with it. Mine is pretty thin already

 

Post pics of yours please.

 

I’m all in!

 

I'll test one out!

 

PM me your name and address.

 

PM me your name and address.

 

On its way!

 

One is on it's way.

 

Very nice! I have a road trip coming up in a few weeks, this will get plenty of run time.

 

@be_unscared @OnespeedTRD @stephenw13 let me know once you get the covers and how they are working. Hopefully it is a solution for everyone with errors.

 

Yeah will do, sir. I imagine it will take some time for it to get here. Do you want them sent back your way so you can replicate them, or are we allowed to purchase what we’ve got?

 

It shouldn't take too long to get there. I still have my AJT cover so I can replicate it. I sent those out for you guys to test and see if it fixes the issues that people have with the original cover. I'm hoping that it is a solid fix. The three that I sent out to you guys are on the house.

 

genuinely appreciate that. If I ever have the chance to repay the kindness, I will

 

I could use one for my 2020 if you still need testers.

 

What grille are you using with your AJT?

 

Well that's awesome! I'll be sure to report back my findings. Probably won't be until mid-April once I'm done with the first big leg of our trip. I'll have about 2000 miles on it by then.

 

Sorry I have not had time to pull mine back off and post pics. I'll try to get it done this week. Suddenly it is winter again here in PA

 

I am using the TRD pro grill on my 2020 Limited.

 

Gotcha. So you have the 14-17 Pro style like I have. What errors are you getting with yours?

 

actually shoot, I have the jomax bracket so I guess this wouldn't apply to me.

 

Lol....you shouldn't have any issues with the Jomax.

 

that’s what I’m running. It should get here this week. My other option was to permanently mount it to the bottom portion like one guy did on here. His has had no problems, but I wasn’t too keen on permanently affixing it to the plastic with epoxy.

 

New Tundra234 cover showed up today. I'll get it installed this week an see how it goes.

 

I cut the ribs out of the AJT cover. Will test out this afternoon



The top had already been flycut a bit thinner. Hopefully removing the ribs will eliminate the issues.



I Broke 2 of these 3 lower grill clips, anyone have a p/n?

 

Got mine in the mail yesterday. Thanks OP!

 

You bet! Let me know how it works.

 

It is still close to 1/8 thick with the ribs removed. The first Jomax cover was thicker as well and they went to a thinner cover before the stopped producing them. Try it and see if you still have issues. If you do, I have one ready to mail in 1/16th if you want to be my fourth tester.

 

I have some extras I can send you if you want. Just send me your address and I will try to get them in the mail to you this weekend. Otherwise Amazon has them.

$7 Kinstecks 25PCS Trim Door Panel Clips Trim Panel Retainer for Toyota Tacoma Tundra Camry Corolla Avalon Sienna Highlander Land Cruiser RAV4 Lexus 90467-10188

https://www.amazon.com/gp/aw/d/B0837XJQ49?ref=ppx_pop_mob_b_asin_title

 

I believe mine is getting assembled this evening. Weather is a defining factor for me and my help. We’ve got some lighting to run first before the rain hits. I’ll confirm when it’s all done and keep this thread updated as the driving goes