Anyone Runnung LED Highlight Assembly Upgrades?

I swapped out my stock halogen lights that came with my SR5 model and put in TRD Pro lights, easy upgrade and worth it!

I got my harness from:
https://www.headlightrevolution.com...conversion-2009-2018-H-TUNDRALED_2?quantity=1

 

I love mine but unfortunately I am getting condensation in my passanger side.

 

Just in case anyone else is shopping for these - ended up finding the best price (with no tax) from Lithia Toyota in Billings, MT. Shipping costs were just under the $200 free shipping offer, so ended up shipping was free.
Now as long as they show up… (had a Canadian dealer take my order, then happily cancel it a few hours later with no explanation)

 

2020 SR5 with factory halogen headlight, one strip led on the bottom.
I ordered my harness from headlight revolution, and OEM trdpro led headlight housings, simple swap on and it is one of the best mod I did, night and day difference compared to halogen.

 

I guess I will jump on also, OEM LED Headlights and Ihacker harness,
Took 3 hours but looks really Nice .
Great upgrade, Also, having a 38 gal tank is great,

 

Head light revolution’s harness worked perfect me as well

 

Just bought a set of the OEM LED headlights. Emailed my local Toyota parts place and asked if they would price match Sparks and they did! No shipping cost and can pick them up locally! Ended up getting them dropped from like $350 per light to $290! Doesn't hurt to ask for a price match.

 

You beat me to it. Glad you found them. They shipped my lights out yesterday, so you should be good. I also just ordered the TRD Pro grill from them too.

There is another dealer in Alabama that is selling stuff a little cheaper, but since Montana is closer I figured the few dollars more was worth it for less chance of shipping damage.

Enjoy!

 

Yep, they called to confirm my order and apologized since it would take a day or two to ship since they weren’t in stock. Great service, and very friendly. Low price, no tax, free shipping…it all works.

 

I got the recall done, then had a halogen bulb go out, so I made the LED swap. Wait for a big holiday sale and find the dealership with the cheapest price for the headlights. Super easy to install. One of the few upgrades I feel proud to install. Just made sure you label each bolt. 10mm bolts have different thickness. Some are made for headlight, and some are for the side panel. Don’t mix the panel and headlight 10mm.

 

All LED setup now ↓ . Night & Day difference from the stock halogens it came with.

Morimoto XB Gen 2 LED Headlights + Morimoto 4Banger Wide LED Foglights + NSV LED Light Bar (Hood Bulge) = Daytime at Night

 

where did you buy the Morimoto’s?

 

I would take the OEM headlights over morimoto v1 especially for the price difference. The morimoto v2 seem slightly better from what I've read. Is it worth double the price? I don't think so though. OP you made a good call with OEM.

 

Man I want that NSV bar, but it says it doesn’t work with the OEM LED headlights.

 

One thing I have noticed with my stock LED headlights is they seem to have solved the issue of clouding over of the front lenses. My 2006 Tundra was terrible at this and I eventually replaced them with an after-market set. My 2018 is sparkling clear with no degradation at all.

Dan

 

@SPOirish28 Got it from Headlight Revolution last fall, they (and Morimoto) were running a special which included the 4Banger Wide fogs free.

@NCred OEM's were also an option for me, but I already had the NSV bar and the special ↑ they were running was too good to pass up.

 

I need to replace mine, how difficult of a job it it to do and do I need t take off the entire front grille.

 

1. Good idea.
2. Super easy
3. Yes, even with removal of grille, it's still super easy.

 

It's fairly easy, just take your time and keep a soft hand. Dont meat hand stuff. I also suggest buying some extra plastic push rivets because there's a good chance some of yours might break. I know some of mine did. 3 bolts on each headlight if I remember. Have a magnetic tray near by so you don't lose any. My R led turn signal bulb has fell out of socket so much I'm a pro at taking that grill off now

 

I'm not a fan of the TRD LEDs. The light output is better but still leaves a lot to be desired compared to headlights on other vehicles I've owned.

I wish there was a stock projector style option.

 

Morimoto vs OEM LED Headlights → https://youtu.be/fQWXMGXDnLE

LED Fog Light Comparisons (Morimoto, DD, Rigid, Baja, etc) → https://youtu.be/s04cZYHkubQ

 

Just finished upgrading to TRD Pro grill and LEDs. Thanks for all the tips. Very happy. Easy job. @iHacker harness worked perfect.

Protip for the TSS if you opt for the grille- add 2 washers below the radar plate on the top silver screw to angle the sensor up. Fixed calibration, even for my knockoff eBay garnish (on OEM Grille). Zero reason to spend money on the expensive garnish or do any mods to a cheap garnish. 2 washers and you’re done. Enjoy!

 

Are you in Canada? Looking to do this to mine as well.

 

Yes, I am. Luckily, I’m just across the border, so ordering from the US worked out (picked it up in WA) and ended up being cheaper to boot.
Got the ihacker harness, which looks excellent, and now I just have to do the actual install.

 

How do you like these lights? I'm considering them myself.

 

https://www.amazon.com/AKKON-2014-2021-Retrofit-Headlight-Assemblies/dp/B08GS7T1V4?pd_rd_w=dD6RX&content-id=amzn1.sym.6c9101f8-677d-4b13-9bf0-c7e0d8fdf3bd&pf_rd_p=6c9101f8-677d-4b13-9bf0-c7e0d8fdf3bd&pf_rd_r=3RXH35Q4VHPQAGDQ3BQF&pd_rd_wg=PLLwg&pd_rd_r=46379701-4995-49be-9cba-fbf520dd6512&pd_rd_i=B08GS7T1V4

I bought these for my 2016 1794 they are super bright! Plus they look amazing I’ve had them for about a year and they still look amazing. They are also plug and play

 

"Currently unavailable.
We don't know when or if this item will be back in stock."

...on the website.

Dan

 

AKKON - For 2014-2021 Toyota Tundra [Factory NON-LED DRL Model] Full LED Retrofit Headlight Assemblies

https://www.amazon.com/gp/aw/d/B08GS6B8V3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWw

There’s this one it’s looks exactly the same

 

I have the Morimoto v2's sitting in my garage... just need to find time to install. Stocks are halogens so it'll be a crazy difference. Will post a pic once I get to it.