GEN 3 (2022+) Wheels and Tires Photo thread

Has anyone had issues with their TPWS after swapping sensors into new wheels? I know it’s supposed to automatically just pick up the tire pressure but my truck seems to be having issues..

Stock sensors were moved into my new wheels and worked for an hour before they stopped reading. I took it into Toyota and they are perplexed. They can’t get it to work either. Obviously I went through all the menus to reset before taking it in. They cleared the system, confirmed the sensors aren’t broken but they still won’t display on the tire pressure screen, just dashes no pressure values.

They gave me the truck back saying it just needs to be driven. That was a week ago. Thinking I’m going to have to head back and have them swap out sensors for me. Any feedback would be appreciated thanks!

 

if you have the truck on or drive more than 30 minutes it should pick it up by then. 2-5 miles drive isn’t enough time for the computer to calibrate

 

goals! Any suspension changes? Any rubbing issues? Im currently in the market for something similar to your setup.

 

Thank you for the input. Unfortunately I have

 

Can you please take a picture from the front or rear so we can see how much, if any, is the tire sticking out with those fenders flares ?
The wheels I have are +35 and don't want the wheel too far in if I install these
Thank you

 

I finally got new wheels and tires, so thought I would share. Went with KMC Trek 17x9 and BFG 35x12.50 KO2's. Also added Westcott 3/1 leveling kit. Enjoy!

 

THIS MAY BE A DUMB QUESTION BUT IM CURIOUS, HOW DO YOU KNOW IF YOU HAVE TYPE A OR TYPE B?

 

Tire size is different

 

Ive got 20" and the tire size for both type A and B are the same. 265/60/20. Edit: I see the spare tire sizes are different. I guess I could crawl up under the truck and look at the spare to figure it out.

 

Looks good. Very well done.

 

Thanks man! I installed King shocks on all 4 corners with 2” lift up front and OME rear coils giving me 2.5” lift in the rear. Minor rubbing so I plan to remove the mud flap bracket and it should be fine after that.

 

NAngelo I'm interested to hear how the General Grabber ATXs are in the snow, got a recommendation from my brother-in-law for them to replace the factory Yokohamas. Whereabouts are you located, if I may ask? How much snow are you dealing with?

 

it is a perfect match. The flares also look more OEM than the one it came with, go figure.

 

Mesquite BRO!!!

 

Anyone here rocking these KMC Lobos? I was thinking of getting these in Blue. I have a 23 in Lunar Rock. Wondering if the blue will clash or compliment the LR

 

Just put new wheels/tires on our 2023 Tundra.
17x8.5 KMC 708 wheels and 315/70/17 Dick Cepek Fun Country tires. Had to remove mudflaps, rear bracket behind the mudflap and trim liner. Stock height.

 

Man Army Green with the bronze wheels look great!

 

Anyone know the offset on the 18” TDR off-Road wheels like this? It’s like -45 or -65 right?

 

other way, toyota oem are always high positive, like +60

 

Pretty sure it’s a high positive offset. More like +55 or +60. The exact offset is in this thread.

 

TRD OR wheel specs

 

Stock platinum wheels and tires for sale
26 miles dealer take off.

Shoot me an offer, located in Bay Area CA

 

Posted in the AG thread but I wanted to contribute to this one as well.

Stealth Custom Series F5, 18x9 +12 wrapped in BFG KM3 37x13.50r18:

 

Looks nice, how’s the rubbing with 37s?

 

Thanks! There wasn’t any rubbing until today when I found out I need more trimming done on this plastic piece on the driver’s side:



Only happens when turning left into a driveway from a grade. Other than that, smooth sailing so far.

 

I haven't seen blue rims on a Lunar Rock Tundra but that could be really nice. So many shades of blue so it would really depend on the rim color. Seems like a darker blue may be a good look. Have you checked the Lunar Rock thread to see if anything is posted there?

 

2022 Tundra Sr5 Crewmax with 295/60/20 Falken Wildpeak’s on Limited wheels that are 20x8 with +60 offset. No lift or level.

 

I agree! I’m gonna try finding them at a local shop to check how dark the shade of blue is in person. I’ll post this up in the LR thread as well. Thanks for the advice.

 

I’m loving these 5 spokes!

 

Test fit the new Method 318 in 18x9 +18! Available in black or bronze! Tires being ordered today, plan is to install the lift this weekend then I'll drop it off Monday for an alignment and wheel/tire mounting on Monday!