WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I've had husky liners on all 3 of my Tundras ('00, '11, '23) - I found they hold more water /ice/snow in them than the weathertech did. I go in/out of my truck a lot when loading/unloading my boat, so I want good coverage of all the water off my shoes. In the winter, when I was in Vt, they held the snow/ice/salt really well. When I pull them out, the carpet underneath looks original.

 

Rear King shocks installed. Front shocks, UCAs and rear coils will be installed this upcoming weekend.

 

Started working on my trailer setup. Here’s a pic before the Andersen WDH is installed.

 

The emblem swap out is through Etsy. Use the search bar for WeatherTech emblem swap out for Toyota Tundra

 

had weather techs and hated them, swapped for husky and much better coverage and comfort

 

Double Cab fam, we have sliders available now for our trucks from CBI! I also added their rear bumper, which is incredibly well-made. I go over everything in this video. Subscribe/like =D

https://youtu.be/m5NQvIPgJXM

 

Where did you find this? I was looking at getting the front bumper and sliders but wanted a matching rear bumper and their site doesn't have it.

Thanks in advance.

 

We work directly with CBI (we're dealers), so hit me up if you want to put an order together, I can give you a deal if you want to bundle too =D
I had to travel there and back a few times to help with product development for the Double Cab, specifically on the sliders. This is the first rear bumper installed on a customer truck (besides their prototype on their green tundra). It is super well made, beautiful welds, and very well thought out design that retains all the factory sensors and tow capability.

I mention in the video that the rear bumper and sliders go into production this week. It will be about 3-4 weeks before they ship. I don't believe they have them on their website yet.

 

If you want to place a pre-order, I can help you with that too.

 

I am curious why you wanted to swap out the Fox suspension on the Pro? Also, what rear coils are you putting on, and what difference will they make for you?

 

I put my Timbren SES Stops in the rear today.

I took it for a test drive and noticed a strange immediate bump going over the little road defects. They are almost touching the axle so the little bit of travel pushes the axle up and hits the stop. Keep in mind that it is cold and these are brand new and quite stiff.

The truck will sit down on these with a little weight in the back which we usually have and also the trailer. I need to test it with more weight on the rear axle at get a better idea of how these ride.

Pics show side by side of the OE bump stop and the Timbren. and the Timbren in place filling up the space between the frame and axle. They claim to have a 6" final install size. Under normal conditions, there should be a 1 1/2" to 1/2" gap when the truck is unloaded. Mine is more like 1/2".

These definitely won't help improve articulation but they do offer an "Off road" version.

 

Good questions, I was curious about this as well

 

Picked up my limited yesterday, Removed the console safe and order husky floor mats today

 

Color matched paint or wrap?

 

I’ll be needing a 2.5-3” lift for what I need the truck to do. I do a good amount of off-roading to get to certain remote camp sites. I’m running OME heavy rear coils to carry a truck camper. Long story short, I didnt order the Pro in the first place. I had a 1794 on order but after waiting 8 months, a Pro was available at MSRP and I took it. I figured, i could sell some of the parts to make up for what I’m building it to be.

 

Awesome. Thanks for sharing and I look forward to seeing the build.

 

Toyota parts says that divider part number doesn't work with gen3. I see it does. Did you have to do anything particular to make it work?

 

Color matched paint from www.paintedoemparts.com price was pretty hard to beat.

 

Tried to get a little creative and make the Pro unique. Think the plan turned out well.

 

Now that's different and pretty cool, looks good!

 

I also have a Limited and Husky mats. Just curious though, why did you remove the console safe?

 

I need the console space. Didn’t think I would ever lock it.

 

Any word on the CrewMax sliders with the fill plates? I asked them sometime in December and was told a month-ish.

 

Now if that lit up with the blinker lights....

 

Right, that would be next level...

 

13K Zeak winch is on the Pro, now we can have some fun!...fitment wasn't bad at all, I'll go over all the details of what had to be modified in the install video...should be posted by the weekend, let's get this party started!

www.youtube.com/NitroZ18Fishing

 

Def going to check that out. I have the CBi on porch to install and thinking on what winch to get... Hopefully have right tools to modify as needed....


What made you go with that brand instead of the Warn 12k I think you were going to install?

 

Yea give it a look!...it's on sale right now for $430, can't beat it!...and honestly the install was a lot easier than I expected, minor modifications needed that'll I'll show in the video but it's nothing crazy!
Here's the link to the winch if ya wanna take a look, hope it helps!
https://amzn.to/3ZLgf7f

 

Thanks for posting the Yakima pics. I've been trying to decide between the Overhaul and the Outpost rack. I know the Outpost will be shorter than the cab, but I was curious how tall the Overhaul is in the shortest position relative to the cab. Is yours in the shortest position? also, what length bars?

 

How do you like that bed cover been eyeing up the Retrax Pro Xr bed covers.