1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Repairable? Anyone Else Have Grille Surround Screw Bracket Break When Removing Grille Insert? Won't turn over Nurf bars stainless for 250 or under recommendations 2014 Tundra 1794 Heated Steering Wheel Painting my new tailpipes. VHT or Por15? Would an aftermarket HVAC fan be an improvement?

Front bumper mod Clearance Rub

Discussion in '2.5 Gen Tundras (2014-2021)' started by Jsena, Jul 30, 2017.

Page 1 of 2
  1. Jul 30, 2017 at 11:44 AM
    #1
    Jsena

    #1
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Any suggestions before I start this guys. Gonna move this screw forward about an inch, then cut off the back for more clearance IMG_1699.jpg
     
    Jsena, Jul 30, 2017
    #1
  2. Jul 30, 2017 at 11:55 AM
    #2
    ColoradoTJ

    #2
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    41,375
    Gender:
    Male
    First Name:
    Chris
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Cut off wheel will make short work of that.
     
    ColoradoTJ, Jul 30, 2017
    #2
    Jsena[OP] likes this.
  3. Jul 30, 2017 at 12:02 PM
    #3
    Jsena

    #3
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    ??

    image.jpg
     
    Jsena, Jul 30, 2017
    #3
    Law323 and ColoradoTJ[QUOTED] like this.
  4. Jul 30, 2017 at 12:33 PM
    #4
    ColoradoTJ

    #4
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    41,375
    Gender:
    Male
    First Name:
    Chris
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    That would be correct Mr Sena. Careful with the guard off.
     
    ColoradoTJ, Jul 30, 2017
    #4
    rons23, DVYota and Jsena[OP] like this.
  5. Jul 30, 2017 at 12:35 PM
    #5
    Jsena

    #5
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Thanx my friend.. before and after a coming soon ᕙ(ツ)ᕗ
     
    Jsena, Jul 30, 2017
    #5
    ColoradoTJ[QUOTED] likes this.
  6. Jul 30, 2017 at 12:38 PM
    #6
    ColoradoTJ

    #6
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    41,375
    Gender:
    Male
    First Name:
    Chris
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Patently awaiting your fab skillz pics.
     
    ColoradoTJ, Jul 30, 2017
    #6
    Jsena[OP] likes this.
  7. Jul 30, 2017 at 12:39 PM
    #7
    Boondoc89

    #7
    Boondoc89 Shit happens when you party naked

    Joined:
    May 1, 2017
    Member:
    #7521
    Messages:
    96
    Gender:
    Male
    First Name:
    Doc
    Vehicle:
    '17 mgm DC TRD 4x4
    No mods
    I take the guard off of all my grinders as soon as I open box lol. They get in the way and you can't see what you're doing. But I agree it adds a little more danger into an already dangerous tool lol
     
    Boondoc89, Jul 30, 2017
    #7
    renosauce, Jsena[OP] and Eclipsed & Floating like this.
  8. Jul 30, 2017 at 12:42 PM
    #8
    Eclipsed & Floating

    #8
    Eclipsed & Floating Over it.........

    Joined:
    Feb 20, 2017
    Member:
    #6454
    Messages:
    12,486
    Gender:
    Male
    I’m right where I need to be
    Vehicle:
    Voluptuous Whitey
    Please be careful. Did it come with a guard? If so, then use it
     
    Eclipsed & Floating, Jul 30, 2017
    #8
    DVYota and Jsena[QUOTED][OP] like this.
  9. Jul 30, 2017 at 12:43 PM
    #9
    Eclipsed & Floating

    #9
    Eclipsed & Floating Over it.........

    Joined:
    Feb 20, 2017
    Member:
    #6454
    Messages:
    12,486
    Gender:
    Male
    I’m right where I need to be
    Vehicle:
    Voluptuous Whitey
    Agreed, but Jay is fairly new to the tools of that nature
     
    Eclipsed & Floating, Jul 30, 2017
    #9
    DVYota and Jsena[OP] like this.
  10. Jul 30, 2017 at 12:49 PM
    #10
    Jsena

    #10
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    yea, it came with a guard.. actually believe it or not.. before I was a bartender I used to be a concrete finisher for about 7 years. Work was super slow from recession so stated bartending.. but I used girders a lot back in the day.. Grinding walls and cutting steel out of stuff.. but I've never done anything like this.. had to get some new bolt tops..
     
    Jsena, Jul 30, 2017
    #10
    ColoradoTJ and Eclipsed & Floating[QUOTED] like this.
  11. Jul 30, 2017 at 12:50 PM
    #11
    Eclipsed & Floating

    #11
    Eclipsed & Floating Over it.........

    Joined:
    Feb 20, 2017
    Member:
    #6454
    Messages:
    12,486
    Gender:
    Male
    I’m right where I need to be
    Vehicle:
    Voluptuous Whitey
    Oh ok. Just b careful. Sometimes too much confidence is what puts us in a dangerous place. I trust ya!!
     
    Eclipsed & Floating, Jul 30, 2017
    #11
    Jsena[QUOTED][OP] likes this.
  12. Jul 30, 2017 at 12:54 PM
    #12
    Jsena

    #12
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Okay so this bolt came out but screwed into this thread knobIMG_1849.jpgIMG_1848.jpg

    So since I'm cutting that threaded piece off, i had to go get these hex nut m8-1.25IMG_1846.jpgIMG_1847.jpg image.jpg
     
    Jsena, Jul 30, 2017
    #12
    Eclipsed & Floating likes this.
  13. Jul 30, 2017 at 12:56 PM
    #13
    Bannock452

    #13
    Bannock452 New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    360
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    I was going to trim and do the exact same thing. But I figured out I needed to trim after I already got my corner pieces painted. So opted not to trim. Like to see your results tho! Good luck!
     
    Bannock452, Jul 30, 2017
    #13
    Jsena[OP] likes this.
  14. Jul 30, 2017 at 1:42 PM
    #14
    Law323

    #14
    Law323 it’s only weird if you make it weird

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    9,812
    Gender:
    Male
    First Name:
    Law
    Baton Rouge, La
    Vehicle:
    2012 4.6 L MGM DC
    Toytec BOSS suspension lift @ 3" (front) Toytec BOSS remote resi's (back) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae TRD sway bar Upcoming: LED backup lights OEM Backup camera Iron Cross Patriot step bars Trifold or roll up tonneau cover
    What's this for? Rear seat fold down??
     
    Law323, Jul 30, 2017
    #14
    Jsena[OP] likes this.
  15. Jul 30, 2017 at 1:45 PM
    #15
    DVYota

    #15
    DVYota Super stock street truck

    Joined:
    May 31, 2016
    Member:
    #3492
    Messages:
    2,082
    Gender:
    Male
    First Name:
    Matt
    South Carolina
    Vehicle:
    2014 Sequoia 2021 Tacoma
    Basically stock
    Clearance for tire rub fix. #stanceLife
     
    DVYota, Jul 30, 2017
    #15
    BlueBottle and Law323[QUOTED] like this.
  16. Jul 30, 2017 at 1:46 PM
    #16
    DVYota

    #16
    DVYota Super stock street truck

    Joined:
    May 31, 2016
    Member:
    #3492
    Messages:
    2,082
    Gender:
    Male
    First Name:
    Matt
    South Carolina
    Vehicle:
    2014 Sequoia 2021 Tacoma
    Basically stock
    Don't forget your eye protection brother! Good luck!
     
    DVYota, Jul 30, 2017
    #16
    Jsena[QUOTED][OP] likes this.
  17. Jul 30, 2017 at 1:47 PM
    #17
    CM-LENNY

    #17
    CM-LENNY No Complaints

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    1,245
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    PRO shocks, 37's Nitto G2's 4:88 diffs, few other mods
    Front bumper mods.........
     
    CM-LENNY, Jul 30, 2017
    #17
    Law323[QUOTED] likes this.
  18. Jul 30, 2017 at 1:47 PM
    #18
    Jsena

    #18
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Front tire clearance.. okay boys finished
     
    Jsena, Jul 30, 2017
    #18
    Law323[QUOTED] and DVYota like this.
  19. Jul 30, 2017 at 1:52 PM
    #19
    Law323

    #19
    Law323 it’s only weird if you make it weird

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    9,812
    Gender:
    Male
    First Name:
    Law
    Baton Rouge, La
    Vehicle:
    2012 4.6 L MGM DC
    Toytec BOSS suspension lift @ 3" (front) Toytec BOSS remote resi's (back) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae TRD sway bar Upcoming: LED backup lights OEM Backup camera Iron Cross Patriot step bars Trifold or roll up tonneau cover
    Sweet. Don't leave us hanging!! Let's see the end result!
     
    Law323, Jul 30, 2017
    #19
    Jsena[QUOTED][OP] likes this.
  20. Jul 30, 2017 at 1:52 PM
    #20
    Jsena

    #20
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Before, IMG_1699.jpg

    After pic with the new hole and bolt in, just had to cut the back off now. Also put the rubber piece with a new hole and put it back on tooIMG_1850.jpgIMG_1853.jpg
    IMG_1852.jpg
    Now it's cut off finishes with about 1/2 inch clearance IMG_1855.jpgIMG_1854.jpg
     
    Jsena, Jul 30, 2017
    #20
    ColoradoTJ, Eclipsed & Floating, Bannock452 and 2 others like this.
  21. Jul 30, 2017 at 1:55 PM
    #21
    Jsena

    #21
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Still got to maybe round off the edges but shit, took me about 30 mins total once I got started.. plus lift shop was gonna charge me about $200-$250 for the job. I just bought $3 for screws and $10 for a metal blade.. no more rub in full reverse :amen::bowdown::burnrubber:
     
    Jsena, Jul 30, 2017
    #21
    1UPPER, joonbug, ColoradoTJ and 4 others like this.
  22. Jul 30, 2017 at 1:55 PM
    #22
    Tundraplatinum

    #22
    Tundraplatinum New Member

    Joined:
    May 18, 2016
    Member:
    #3392
    Messages:
    235
    Gender:
    Male
    Vehicle:
    2016 Platinum CM
    I almost lost my thumb from grinder without guard. Wheel blew up ripped open and broke my left thumb also chunks went into both my legs just missed my junk
     
    Tundraplatinum, Jul 30, 2017
    #22
    Boondoc89[QUOTED] and Jsena[OP] like this.
  23. Jul 30, 2017 at 1:56 PM
    #23
    Jsena

    #23
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Ouch.. yea man.. have to check blades and if a lot of use change it out. Pieces can fly off that thing and cause trouble me . Glad you units okay lol
     
    Jsena, Jul 30, 2017
    #23
    ColoradoTJ, Boondoc89 and DVYota like this.
  24. Jul 30, 2017 at 1:57 PM
    #24
    Jsena

    #24
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    image.jpg
     
    Jsena, Jul 30, 2017
    #24
    Eclipsed & Floating, Law323 and DVYota[QUOTED] like this.
  25. Jul 30, 2017 at 2:00 PM
    #25
    CM-LENNY

    #25
    CM-LENNY No Complaints

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    1,245
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    PRO shocks, 37's Nitto G2's 4:88 diffs, few other mods
    Nice job Jay. Love to see guys tackle projects in the driveway ! Way to go......:thumbsup:
     
    CM-LENNY, Jul 30, 2017
    #25
    Eclipsed & Floating, Jsena[QUOTED][OP] and DVYota like this.
  26. Jul 30, 2017 at 2:01 PM
    #26
    DVYota

    #26
    DVYota Super stock street truck

    Joined:
    May 31, 2016
    Member:
    #3492
    Messages:
    2,082
    Gender:
    Male
    First Name:
    Matt
    South Carolina
    Vehicle:
    2014 Sequoia 2021 Tacoma
    Basically stock
    Looks good!
     
    DVYota, Jul 30, 2017
    #26
    Eclipsed & Floating and Jsena[OP] like this.
  27. Jul 30, 2017 at 2:02 PM
    #27
    Jsena

    #27
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Thanx Lenny.. I've seen your results.. appreciated my friend
     
    Jsena, Jul 30, 2017
    #27
    CM-LENNY[QUOTED] likes this.
  28. Jul 30, 2017 at 2:03 PM
    #28
    Boondoc89

    #28
    Boondoc89 Shit happens when you party naked

    Joined:
    May 1, 2017
    Member:
    #7521
    Messages:
    96
    Gender:
    Male
    First Name:
    Doc
    Vehicle:
    '17 mgm DC TRD 4x4
    No mods
    One of my supervisors over in okinawa was grinding aluminum with a flap disc. The disc blew up and it's shredded his hand. Damn near lost it. So I feel for you man. I hope all is well with the thumb.
     
    Boondoc89, Jul 30, 2017
    #28
    Jsena[OP] likes this.
  29. Jul 30, 2017 at 2:03 PM
    #29
    Law323

    #29
    Law323 it’s only weird if you make it weird

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    9,812
    Gender:
    Male
    First Name:
    Law
    Baton Rouge, La
    Vehicle:
    2012 4.6 L MGM DC
    Toytec BOSS suspension lift @ 3" (front) Toytec BOSS remote resi's (back) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae TRD sway bar Upcoming: LED backup lights OEM Backup camera Iron Cross Patriot step bars Trifold or roll up tonneau cover
    I'd rather shoot myself in the foot trying something I've never done before than have a shop screw me over on something as simple as this!

    Solid work brother!
     
    Law323, Jul 30, 2017
    #29
    joonbug, Eclipsed & Floating and Jsena[QUOTED][OP] like this.
  30. Jul 30, 2017 at 2:08 PM
    #30
    Jsena

    #30
    Jsena [OP] Trend setter, not a follower!!

    Joined:
    Mar 20, 2017
    Member:
    #6889
    Messages:
    8,196
    Gender:
    Male
    First Name:
    Jay
    Las Vegas, NV
    Vehicle:
    A Bad Bissshhhh
    7 inch BDS LIFT, 22x10 RBP wheels 37 inch Atturo MT Tires, Flowmaster, Bullydog Tuner
    Yea man, looks good.. I'm just happy there's no more rubbing noise.. that shit scares the crap outta me when it hits.. boom boom book boom. I feel like o hit someone
     
    Jsena, Jul 30, 2017
    #30
    Law323[QUOTED] likes this.
Page 1 of 2
Register FREE to Reply!

Products Discussed in

ALZIRIA Taillight Assembly Compatible with 2014-2021 2014 2015 2016 2017 2018 2019 2020 2021 14 15 16 17 18 19 20 21 Toyota tundra Driver Side (Chrome-Left)
$28.99
CERAKOTE® Ceramic Trim Coat Kit - Quick Plastic Trim Restorer - Ceramic Coating Guaranteed Restoration to Last Over 200 Washes – A Ceramic Coating, Not a Dressing
$16.88
VViViD Extra-Wide Headlight Taillight Vinyl Tint Wrap Roll (Light Smoke 16" x 48" 2-Roll Pack)
$18.98
SEM 39143 Trim Black Aerosol - 15 oz.
$18.89
TEMCo Hammer Lug Crimper Tool - Crimps 8 AWG to 4/0 Battery & Welding Cables (Workbench-Mountable)
$20.69
Lisle 22800 Wheel Stud Installer
$24.46
Toyota Gasket - 22271-50050
$11.00
HIGH FLYING for Toyota 4Runner 2010-2024, Tundra 2014-2021 Steering Wheel Replacement Part BLACK Perforated Leather No Strip (With Heating Function)
$390.00
Lisle 37960 Electrical Disconnect Pliers
$19.98
12204-38030
$13.25
Toyota Genuine Parts - TRD Air Intake Truck (PTR03-00140)
$517.51
NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)
$39.99
Toyota Genuine Fluid 00295-00103 Formed-in-Place Oil Pan Gasket - 3 oz. Tube
$20.44
Cup Holder Divider and Hide for 2022+ Toyota Tundra, Anti-Tipping Insert (Matt Black)
$15.99
EPAuto Spill Proof Radiator Coolant Filling Funnel Kit
$22.87
ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle
$20.47
TRIAX Synergy Gear Max 75W-90 GL-5 Limited Slip, Ultra Long Drain 500k Miles, Manual Transmission, Gear/Differential Lubricant (1 Gallon)
$38.49
ValvoMax Oil Drain Valve - Quick Twist Oil Drain Plug for DIY Oil Changes At Home in 10 Minutes - No Tools, No Mess, No Cleanup - M14-1.50 Thread Size - Made in USA
$49.99
TGL Truck Hitch Step, Trailer Hitch Step Bar, Tow Hitch Step for 2" Receivers, Great Accessories for Towing, Recovery and Accessing Roof and Bed. Compatible with Jeep Accessories, Ford, Toyota.
$59.99
Offroam Phone Mount Made for Toyota Tacoma (2016-2023)
$79.95
FloTool 11909ABMI RhinoRamp Vehicle Ramp Pair - Ideal for Stress-Free Home Garage Maintenance - Reduces Slippage - Works with Low Clearance Vehicles - 12000lb GVW Capacity - Extra-Wide Design
$65.00
Motivx Tools Oil Filter Wrench, Drain Tool, and Advanced Engine Oil Funnel Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Systems
$74.95
Midland - MXTA26 MicroMobile 1.5" Base Diameter 6DB Gain Whip Antenna with NMO Great for Off-roaders, overlanders, Farmers - Max Power120W Boost Signal Output - 5/8 Wave - 32” Antenna
$59.99
HEMSK DAYS Aluminium Alloy Rigid Molle Panels for Vehicles, Modular Storage & Display, 1 Pack (22"x13.5")
$64.98
Rigidhorse 32" LED Light Bar Single Row Flood & SpotBeam Combo 30000LM Off Road LED Light Bar Driving Light for Pickup SUV ATV UTV Truck Roof Bumper
$65.98
Intro-Tech Automotive TT-84-P Custom Fit Premium Folding Windshield Sunshade for Toyota Tundra Models, Silver
$59.99
Rockford Fosgate Prime R165X3 6.5" 3-Way Full Range Coaxial Speakers (Pair)
$79.98
Dupli-Color EBTY16197-6PK Perfect Match Automotive Spray Magnetic Grey, 1G3 – 8 oz. Aerosol Can, 6-Pack
$69.98
Kat's 11813 Engine Heater Cartridge
$63.01
KICKER 46CSC354 CS-Series CSC35 3.5" (89mm) Coaxial Speakers, 4-Ohm (Pair)
$64.98
MeeFar Universal Car Soft Roof Rack Pads Luggage Carrier System for Kayak Surfboard SUP Canoe Include 2 Heavy Duty Tie Down Straps, 2 Tie Down Rope, 2 Quick Loop Strap and Storage Bag
$69.98
LEXIVON 3/4" Drive Click Torque Wrench 30~300 Ft-Lb / 40.7~406.8 Nm (LX-185)
$79.97
Furhaven Deluxe Multi-Panel Hard Bottom Platform Bridge Backseat Protector w/ Travel Bag - Gray, One Size
$72.95
MaxxHaul 70231 Hitch Mount Pick Up Truck Bed Extender For Ladder, Rack, Canoe, Kayak, Long Pipes and Lumber) , Black , 37 x 19 x 3"es
$63.99
Chevron 65740-6PK 65740-CASE Techron Concentrate Plus Fuel System Cleaner - 20 oz., (Pack of 6)
$59.09
Car Fire Extinguisher Bracket | Fits Most Vehicles
$59.90
Red Line 57905 75W90 GL-5 Synthetic Gear Oil for Hypoid Limited Slip Differentials - 1 Gallon
$77.98
AA Products Tailgate Ladder Foldable Pickup Truck with Wide Pedal Non-Slip Sturdy Easy Install Durable Steel Omni-Directional Ladder Rack Capacity 660 lb(USPTO Patent Pending)
$74.90
Cali Raised LED 32" Lower Bumper Hidden LED Light Bar Brackets Kit for 2014-2021 Tundra (Brackets Only)
$74.98
LEXIVON 1/2" Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
$69.97
Dayco 89378 Belt Tensioner
$65.76
Directed Electronics 535T Power Window Automation System with One Touch Operation
$79.98
To Top