Codes after installing front camera

Hi all - I was installing a Anytime Backup Camera and was having issues getting it working...I haven't gotten it yet because I tripped something and now display the Pre Collision malfunction and a Lane Departure Malfunction "Visit Dealer" codes. I also have no window power on all 5 windows, no climate control, and no powet in the rearview mirror. Hoped it was a fuse but I couldn't find anything- I then went to run a quick trip and truck was shaking horribly - I assume the abs?? Looking for insight on how to fix. Thanks

 

You left battery connected when doing the install work? If so, probably burnt some fuses. Id unplug whatever work you did and check all related fuses for the systems having the alerts - check fuses both under hood and dash.

Could also be low volts or battery doing out. If you have the stock battery, being a 2018 truck, it is time to replace it most likely.

 

Thanks for the reply - yep, seemed easy with the wiring harness so i didnt disconnect it but a bad ground got me. Turned out it was a single 10 amp fuse causing all the issues.

 

Which fuse was blown?

 

I’ve watched a few Anytime Cam install videos and I don’t recall any of them disconnecting the battery. I forget if it came with instructions but I’ll check. The package has been sitting in my glove box waiting to be installed. Would like to know which fuse as well as any other lessons learned.