Raptor lights

Installing raptor lights in my grill. I’ve tried the fuse tap into my ignition with a 10am fuse but no luck. I grounded to the bolt right beside the battery. Anybody have an answer really scratching my head at this point.

 

You sure your leads aren’t backwards?

 

Is this the YotaLED kit? If so, the add a fuse goes in 10Amp “INJ” location. Not the IGN. They will also only come on when the key is turned to ACC just before starting the engine.

 

Pretty sure. Red to hot black to ground. it’s not the yotaled kit.

 

I would test them straight to battery first, to make sure the leds work. Then use a test light to make sure you have power from your add a fuse.

 

Blue ribbon 4x4
Thanks I’ll try that tomorrow thanks

 

^ This.

I tapped into the parking light of the headlight for my Raptor wannabe lights.
I put a very small fuse inline as well as a connector in case I need to pull the grille.