What have you done to your 2.5 gen Tundra today?

Looks great! Does the stock mic still work with the phone?

 

Not to my 2.5 gen Tundra, but to wife's 2 gen Sequoia... I Valhallized her truck



She wanted something light, so she's got 3/16" aluminum plates. Mates nicely with TRD PRO engine skid plate.

Though I like 3/16" steel plates more on my Tundra: RCI skid plate, Valhalla cat shields:

 

Thanks! It does not work with the factory mic, but they included a mic that was easy enough to run. I put it right behind my steering wheel. When I get a chance, I’ll snap a pic.

 

Those are fire!!

 

Got Yokohama G003 in 35s under warranty from discount tire. My brand new duratracs ripped a sidewall off a damn curb. Wtf I knew they weren’t the strongest but damn. Good thing I paid for the warranty.

 

Nice color choice

 

brother from another mother..

 

Got my Ironman4x4 Raid bumper installed. I'll have to come back later and wire up the amber work lights, and figure out how I'll set up the light bar. Ridiculously good deal IMHO for this package from those guys. Quality was great. I prefer a bit more specificity in packaging (especially when there are so many pieces of hardware) but all of the main stuff was very straight forward. Had to mount the new recovery points between the frame and skid plate, so there's an awkward 3/8" gap there. Shouldn't be an issue. I've never run a bumper like this, but I left gaps to the end and got it as 'true' as I thought necessary visually. Wanted to leave enough room for movement and flexion between body and frame. Still, this one is my first aftermarket bumper rodeo!

Any recommendations on approaching the lights? Terminal, switches, wiring kits or DIY resources? I gave my brother my factory Rigid lights with the bumper, since swapping his over was going to be a pain. I've read a lot about Baja Designs and whatnot, but not real experience. I'll need some beam fogs to round out the front completely. On the fence about ditch lights, all said. Really have no need for those.

Also got my seat jackers installed (can't believe I waited so long.. legitimately more comfortable now), and added some vinyl stickers to get the ol' heritage stripe in gray scale.

Still to go:
Rear doors kill mat and audio frogs
Pull out the dash pieces to paint them MGM
Finish the rest of the AJT kit, while dash is apart.
Interior VLED kit and footwell lighting.
Westcott front CB+3 rear when its tire time.

I think I'll do the Raid rear bumper next year's black friday.

 

got these from 2020platinum love em

 

Installed a couple things today:

* Huskyliner weatherbeater floor mats
* Pedal Commander
* MESO Customs map and dome lights
* 12.volt Solutions remote start
* TRD filter/intake

Still have to do the RAS that's sitting here in a box. Probably be spring before that gets installed, as I will probably do that at the same time as the suspension/leveling kit - whatever that ends up looking like.

Also waiting on a Carven exhaust to show up. Black Friday was hard on my wallet.

 

Installed TRD pro grille with new hood bulge marker light bar.

 

Mine are on the way! Should be showing up early next week.

 

Hood bulge marker light bar link? That’s cool.

 

Here ya go! Old Ebay special!

https://www.ebay.com/itm/144471136197

 

TX light bar is in...
Was able to snap this pic right before the torrent came down. More to come.

 

how’d you wire that hood bulge light bar?
Pretty nifty for only $50

 

Making our way down to Vegas to do Mojave road. Hit a shit ton of snow and these Mickey Thompson Baja bosses didn’t care one bit. Who says you cant go fast in snow in a Pre-Runner.

 

I ran the cable under the hood insulation coming out to the side, ziptied the cable down the hood strut, and tucked the wire under the trim going from the hood to the headlight. It's really clean. Granted, the cable wasn't long enough so I had to add a little extra.

 

Figured that’s how you did it. Sounds clean. Is it a direct plug in to the headlight so it runs off all same head light settings?

 

If it weren't for those trees, we'd only see the doors, hood and tires

 

Unfortunately not. I had to splice into the passenger headlight to work off parking lights and headlights.

 

You say that, now you’re gonna be slipping and sliding! HAHAHA go plow some snow out there in the PNW!

 

Power sliding all the corners the wife did not approve of my gymkahana impression

 

Padded the crossbars and installed the TracRac. Tomorrow will be a shake down run with the hang glider up top - and I might just be able to fly too. The rack does seem to generate some wind noise, but nothing too bad.

 

Looks awesome! Your gappage looks great. My bumper is installed a little too high, and touches the bottoms of the headlight wings during heavy offroad.

 

Went and got my Christmas tree.

 

Looks awesome

 

That’s a nice front bumper!