WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Very nice!

 

those are for holding Spey rods (2 handed fly rods). There are a few companies that make these, but those ones are from a buddy in Europe who makes them from carbon fiber and some super truck suction cup attachments. They come off when not in use

Day to day fly rod holding is handled by these Yakima double hauls

 

Finally got the qi charger mod installed and working.

Finalizing the design details and we will be releasing it soon for those with the factory installed qi charger.

Please note: this version is only for the left side. We are still working on a dual charger and another for those without the factory-installed qi charger. Please be patient.

https://youtube.com/shorts/iuwwT2zm3Zg?feature=share

 

Replaced the stock felt splash guard with a TRD pro skid plate. It was a super easy install. 10-15 minutes tops.

 

Great Liners. Just put mine in.

 

Ordered mine yesterday! Have had them on my 2000 and 2011 Tundras... great floor mats - especially in mud/snow/sand/water !

 

thanks for the pics, will have to see about getting some after winter since we are getting the oem all weather liners. if they are good enough to pass the wife abuse this winter, i might keep them or just replace them with the husky's

 

now I’m near blind apparently but do you have the gray interior? Are those husky’s black or a dark grey

 

The truck is Midnight Black with the softex black interior which looks more like dark grey. The Husky mats are black.

 

For a second I thought it was my truck. I have the Limited version, same color and bed cover. Agree 100% about rain, snow, etc. The side latches will eventually flatten. I still have to push a bit on the left one, but it’s a nice tight fit. Nothing gets in. For those with the auto tailgate, I recommend turning off that feature or putting a rubber seal (I did) along the inner top edge in case the tailgate is opened in error with the cover down. It will keep it from scratching the tailgate. Great looking truck and cover.

 

Perfect thank you

 

I got a good deal at my local dealership and went OEM. Nice and snug, low profile and looks nice.

 

Added Go Rhino D1 bars and just got my Talons Garage Catalytic Converter Plate in. Will be installing this weekend.

 

Can you take a pic of it up against the cab, so we can see how the cameras sit with it up? Looking to get a tonneau, leaning towards this, but hoping those cameras clear.

 

As you can see in the pictures it does not touch the camera or the lights. It doesn’t obstruct the rear view camera either. What it does do, is covers the bed view.

 

Thank you!

 

Nice. Does that cover that Cats too?

 

No, the TRD Skid plate, doesn't cover the cats - there are other kits you can get online from other vendors that will do that. They typically start near the back of the TRD skid plate, and go back to cover them. Hybrid has about 8" longer section than non-hybrid for cat protection - check out youtube - search for tundra catalytic protection

 

Thx. I have the Talon waiting to go on when my truck gets here. Was just checking if there was another option. Love the look of your skid plate.

 

Got the Load Lifter 5000 Ultimates added to the Pro, squat is gone (when towing boat) and ride is still excellent…highly recommend, easy install and absolutely worth it imo


No More Squat!...Air Lift Load Lifter 5000 Ultimates, 2022 Toyota Tundra...In Depth Install
https://youtu.be/o-4oL8zuvJ4

 

Fixed so the logos r matching all the way around. Maybe some OCD. But gotta roll right.

 

Love it, my wife thinks I’m insane for doing this every time I rotate my tires…lol

 

Thanks for the video - it’s great.

I cannot find the exact ones on Amazon. Also, what number (model) did you use? None of them seem to fit my 22 Tundra. Thanks.

 

No prob, thanks for watching!…Amazon actually doesn’t carry them for our Tundras yet, it’s kinda crazy…they’re model number 88383….that’s the Ultimate kit with the internal jounce (highly recommend that kit, you can run them at zero psi when not using them)…let me know if ya need anything else!

 

did some additions to my ICS dash mount to solve a couple issues that i had.

with the ICS dash mount, i was unable to use the DC outlet for my fridge or jackery. even though they cut out a portion, they still would not plug in due to their lengths. i purchased and mounted a 3-outlet with a smaller plug that would clear the dashmount to the factory DC outlet. i also already had plans to utilize the outlet to power my dashcam, so i mounted that on there too. i really don't like using dashcams that suction onto windshields, so i opted to mount it onto my dash and tuck the bundle of wires underneath it.

 

Any recommendations of where to purchase. Ur video made it look possible to home install. Very well done!

 

Yeah, I found it here:

https://www.sdtrucksprings.com/inde...=59000&zenid=9abf6ccdb7298983e1b8175067c38462

 

Purchased a Tyger Soft Roll tonneau cover and a black chrome exhaust tip.

Should arrive in a week or two.

 

Got around to tinting the front windows. SolarGard Vortex 25%

 

BFG KO2 275/70/18.