SCS Ray10 wheels 18x9

Shop just called and the 295/70/18 have been delayed asked if I would like to go with 35’s instead or 285’s. Not sure really, will 35’s require any modifications? BMC? Differential drop? I don’t want to do either of those mods if required. Anyone with TOYO ATIII 35’s?

 

I don't personally know, but those more knowledgeable about what tire will fit and what is required will need to know what you have done to the suspension of your truck

 

Is this on stock suspension? If so, 35s won’t fit…

 

No I have a 1.9 lift in the front (6112) and 5169 in the rear no shackles. Standard UCA too

 

35s will probably rub just being at 1.9”. I had to do a BMC and add shims when I ran 6112s to fit 35s… if you’re willing to do that then go for it but if you wanna stay safe then go 285

 

Yeah I’m not going to do a BMC, it amazes me how close the 295 is to the 35’s but from what I read it doesn’t rub with the Ray10’s…..

 

I mean, there is a chance the 35's could work... but every truck is different and no way of knowing without actually mounting.

 

No it’s ok I’m happy I’m able to go to this forum before making costly mistakes.
I’m going to find out how long the lead time is on the 295’s too just in case too.

 

Sick!

 

Definitely would be in for a set of 18” gloss bronze blaze 10s!

 

TOYO ATIII In 295/70/18 have a nationwide back order, with no end date on when they will be replenished. I’m just gonna have to wait it out until they are back in stock. Kinda bummed, got the green light from the wife and don’t want her to change her mind

 

How do these wheels do towing a travel trailer around 7000 lbs vs the stock off road package wheels ?

 

Got new shoes today with just a smidge to spare. 295/70/18 Toyo ATIII

 

Glad no clearance issues, looking mighty good!!!

 

Yup just made it, it was a little less than 1/2 inch. I did. do the bumper shims too

 

What’s your lift specs please?

What's your lift specs please?

 

1.9 in the front, no shims on the 6112 and 5160’s in the back no shackles

 

Will the TPMS from our stock wheels work with the Ray 10's? I am finally having mine installed next Friday and the shop was asking if I was using the stock ones or if I have new ones, I told them the stock ones. So hopefully they will work with no issues.

 

Yes it will, I had the shop switch them over when I installed mine.

 

Yeah they used my stock ones from my 20” platinum wheels with no issues.

 

Ray 10’s in stock boys! Get ‘em while they’re hot! Happy Thanksgiving!

 

If anyone has a set of the discontinued matte gray they wanna sell lemme know please

 

They have been sitting in my garage since the end of June but now they are finally mounted and installed on 295 Wildpeak AT3's. Thanks @SCSPerformance @scs_vuth for such a great product and customer service!!

 

Congrats for getting them on the truck. They look great! Any rubbing or trimming at 1.9 setting with these tires?

 

Thanks! I had rubbing on the mudflaps and on the liner, I removed the mudflaps, and installed CB front bumper shims.

 

Yes This!!

I think anything with a +40 to +55 range would be great... get right up to the fender, but not stick out too much...

 

Oops. Wrong area. Deleted.

 

Cross posted in the Bronze Wheels section but was able to get 295/70R18s with 5100s set on the middle setting with zero rubs (picked this truck up a few months ago and finally got the right wheel/tire setup).

 

Nice!!! I got a set of the same wheel's I'll be putting on this spring and can't decide on what size to go with. Currently was running 275/70/18's but wanted to go either 285/75/18 or 295/70/18! Got a few pics of the poke with those 295's?!