TRD Pro Wheel Well Camo Trim

On the front you can see the engine bay and on the rear all the suspension components with a clear sight through to the other side. I don’t know if the ones that came with it are too short bc of a lift or just not sufficient for approaching winter driving in the Sierra.

 

Thank you

 

Here is a pic of the front and rear with the rear really having no protection.

 

I believe that’s normal.
I have a plat and it’s the same

 

Yeah I figured it’s normal, just hoping husky or someone comes out with liners soon or I’ll try to figure out how to make them myself.

 

Someone got their light bar installed......Just need to connect these marker lights and get the grill markers.

 

@Carguy912 is that the BajaDesigns Light bar? Can you tell me when you ordered it and how long it took? Their site says 8+ weeks right now. Also, did it come with everything needed to install? Is there a switch inside that you installed to control it? Just trying to figure out what all I need to order. Was debating on the light bar $800 seems a little steep but curious to hear if you think it was worth it or if you found it any cheaper?

 

Also, has anyone installed the TRD Pro Camo on a Wind Chill Pearl Tundra? I have a 1794 Hybrid coming in a couple weeks and already have the Grill and found a good deal on a set of Wheels / tires that came off a TRD pro, Curious how the all the digital camo looks on a Wind Chill Pearl, I'm assuming pics from Carguy912 is with the ice cap white color, which obviously matches the TRD Pro white. I'm also interested in the TRD Pro Camo rear spoiler but trying to sort out if I can install it on my 1794, I know the platinum already have a black spoiler trim on the tailgate but 1794 don't.

 

I pre ordered a month ago. It is baja designs. They had 100 off. They are now out in the wild. Shouldn't take long. It came with everything and was easy. Puts out a lot of light and has switch. I'm putting in a stock switch once it arrives.

 

I like the look, but wouldn't it be overkill of orange markers? The headlight, grill, fender, and foglights are all orange markers. I am interested in seeing what this looks like before I start purchasing some of these mods.

 

The grill is supposed to have markers and with the holes being there its going to get them. Also, the white needs it. Something to break it up and I personally like the symmetry of the amber fogs (HUGE upgrade for cutting fog) and marker lights. IMO.

 

I agree, with the light bar in the middle, it does help to have amber fogs to break it up.


Personally, I would want to get TRD Pro/Plat headlights with the sequential turn signal to help break up the amber on the corners. But replacement headlights are never cheap and the grill + matching surrounds are another 1k+.

I might go the budget route with stock TRD OR grill, yotaleds grille light kit, amber led bar, and TRD pro wheel camo.

 

The lights above the sr5 package are awesome. I have the sr5 model with every option you can get. But one thing you can't add are the better headlights. They require the canbus lines. Don't ask me how I know for sure. It was a major bummer.

 

Which stock switch are you getting? The switches located on the lower left of the dash or the toggle switches (which would be awesome) below the radio??

 

The lower left. If I had the time to have figured out the toggle out I would have. I agree w you. That would be silly good!

 

If anyone received a right rear fender [trd pro]
...I have a left rear to swap with. Lemme know!
Mike

 

There is a nationwide issue with the TRD Pro Fenders THE PART # ON THE FENDER being in the correct box with the same PART NUMBER OUTSIDE OF THE BOX. Toyota Corporate is now involved to determine what is occurring. I guess I consider myself lucky for getting the front fenders....as for the rear...I just have the Left Rear fender....the Right Rear Fender is the problem child for me.

 

@Carguy912 what amber fog lights did you order? Part number? You said they do a better job of seeing in fog? Is it the amber light that helps more than the factory fog?

 

I went with heretic. They look way better and break up the sea of black and white on the truck. And what Ryan said. Way brighter and illuminates much better in rain fog and snow. Less light refraction than white .

 

I am just trying to get over the cost of those lights

 

There is a coupon on heretics site. Saves 50 I think.

 

Ya, and I probably can get the military discount as well (retired Army). I am trying to rationalize spending $700 for a hunk of aluminum and some high powered LEDs....LOL

 

I'm talking about the amber fogs. I paid 450.00

 

Understood, I was thinking of the lower grill light bar. I am torn on whether or not to get the bar....I like your fog lights as it off-sets the white Heritage Grill light bar. In my case I haven't upgrade my grill beyond a TRD grill and probably won't go Heritage so having the Amber light bar would offset the white fog lights.

Honestly, if I get the OEM style switch (from the link you provided earlier) shipped, I will more seriously consider the bar. Funny how a $15 switch can be the deciding vote whether I spend $700....LOL. But seriously, this is how this all goes right? And what the aftermarket suppliers count on

 

Does anyone know a part number for the two TRD Pro Hood Pieces or the Camo rear bumper covers without paying the big markup from Yota?

TRD Pro Hood Emblems
https://theyotagarage.com/products/trd-pro-hood-moldings-2022-toyota-tundra-22trdhood

TRD Pro Rear Bumper Cover Camo
https://theyotagarage.com/products/trd-pro-rear-bumper-panel-kit-2022-toyota-tundra

 

@ryanwgregg Thanks! Do you or anyone else know what the appropriate Lower Front Bumper panel is on the TRD Pro's? I got the front Upper Camo Bumper with fog lights
53931-0C230 I'm looking for the panel right below that, My 1794 currently has a grayish version which I'm assuming there is a matte black version that goes on the TRD Pro's?

And does anyone know if the TRD Pro's has the Matte Black trim around the windows or what version of Black side view mirror caps it uses and the appropriate PN? I'm assuming all the black is matte finish rather than the gloss black?

 

go the the ultimate oem 3rd gen parts thread and you can find gloss and matte black window trim numbers

 

Yeah I have those part numbers I just wanted to know if I should get the gloss black or matte black version of the window trim? And also looking for the front lower bumper part number to match the TRD Pro Grill / upper bumper came piece..

 

I think gloss looks better, matches the tinted glass and vinyl wrap, but it is also like $250 more. No idea on the lower bumper part, my 1794 was gray, but my bumpers all gloss black now

 

I don't think there is a lower trd pro piece. I have the trd offroad sr5 with most all trd pro adds. But I don't remember anything below the digi pro camo on the upper bumper piece on trd pro.