What have you done to your 2.5 gen Tundra today?

Gave it a bath and tire shine..............

 

Installed the Phillips LED https://www.amazon.com/gp/product/B013DHXKK8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 lights today. Took an hour. Super bright in the day.

 

I run these lights too. High quality with good color and output

 

Did the mods to the Pro shocks I picked up on CL. Bilstein built the shocks with two snap ring grooves. The passenger uses the lower groove and the drivers uses the upper groove to compensate for the drivers side lean in our trucks. The shocks come at about 1.90" lift over a stock non-pro. I moved the passenger side clip up to the upper groove and manufactured a spacer out of 6061 T6 to move the drivers up the same amount. It should net me about 5/8" additional over the oem pro shock. Will set my truck about 2-1/2" up front, which is very close to my 5100 billy currently installed.

 

Like a disco ball. Haha

 

Where did you get that at Carlito ???...ME WANT ONE !!

 

Here's a night shot of my halos and drl's at night. My projectors aren't turned on in this picture.

 

I installed the STUBBY antenna, and ICI Magnum steps. And I love the way it's all coming together. Hopefully in a week or so I will have the leveling kit and tires....

 

Truck is looking good and coming along nicely.. Question for ya, when u installed the steps, how high did u mount them? Did u have a space like mine?


Or were u able to go higher without hitting door when opening and alleviate that gap b/t door and step. Some days I notice the gap more than others and it bothers me, thinking I may be able to mount the steps higher so u can't see that silver metal between them.

 

Just curious, what case may that be?

 

I got them as tight as i could to the top. Yes there is a little gap and it bothers me too. But I have to remember my Taco and it's steps had the same gap. I got over it. I'm thinking of spraying it black...

 

Tnx for getting back, so I'm guessing it's looks the same as mine in my pic. U don't really notice it until u get pretty close and look for it?

 

The front lighting..

 

When you squat.... that's when my eyes go right to the gap. Looks exactly like yours

 

Where'd you get it from? great addition!

 

Went to a yard sale wife hates when I go. Bought a new grill and lower rear trim. Also a hitch. So i painted thr grill i bought and touched up the lower insert.

 

If you are considering a rigid folding cover, I would suggest the Undercover Flex over the Bakflip. Both cost about the same but the Bakflip rests against the cab when flipped open and the Flex has two supports that hold it up. I have had 2 undercover Flex's and both worked awesome even when covered in snow and ice.

 

That was a really good find. Wish I was that lucky.

 

@mgm16trdpro what antenna you running here ? thx

 

That's a 12 inch AMI big stick. Think u can get at auto anything in different sizes and finish. Reception is pretty good on mine and I live in sticks. It gets good reviews, I'm happy with

 

Birthday is on Wednesday, my wife just gave me a TRD SwayBar..!!!!

Oh yeah, know what I'm doing later.

 

X2

 

Man that truck looks great

 

Did you keep the factory LED bottom strip? Your lens etching is awesome.

 

The bottom led drl board is actually a switch back and so is the turn signal led. So they change to amber when turn signals are on.

 

Is the white color different just because of the lens diffuser or are the LEDs actually different colors?

 

I am in the process of designing my retrofits. I have been considering the switchback LED strip but would keep my OEM signals (I have VLEDs switchbacks). I want them to be the same DRL color though

I will be doing the Panamera shroud as well but am probably going to go with RGBW halos so I can make them red... Although now I'm seeing that EVERYONE has the Panamera shrouds haha - maybe I'll go with another vented shroud.