2022 TRD Pro wheel spacers?

Anyone put wheel spacers on their PRO wheels?
The wheels are stamped with +47.5mm on the back, Westcott says they're +30mm...

Trying to get just a little bit of tire poke with 35x12.5's, equivalent to a +18mm ish wheel.

Thinking about picking up some 25mm (1 inch) spacers, maybe 30mm... hoping someone else has been down this road already.

 

Do you have your Pro already? Mine isn’t coming for another month. I asked Westcott and they said the outside of the tire is about 1-1.25” from the fender flare. This was measured with 35x12.5 stock wheels. My question was on one of his IG posts with the Solar octane Pro if I recall. I had the same question.

 

Mine won't be here til end of October (also Solar Octane ).
I DM'd them on IG as well. He thinks a 30mm spacer will bring me to about a +18mm offset wheel equivalent.
They actually made a post 4 days ago comparing identical setup Pro's, with the same tires (35x12.5 Toyo R/T's). One had aftermarket +18mm wheels, the other stock BBS Pro wheels. Super helpful comparison.
I'm leaning towards a 25mm spacer, only because the stock wheel has literally no concave "dish" to it, worried that hanging it out there too far might look a little goofy.

 

Still no one with spacers on stock Pro wheels?

 

Mine come in Tuesday. 1”

 

I ordered 1” as well. They’re sitting on my bench, truck won’t be here til November though

 

I’ll have them on and some comparison pictures if you’re interested.

 

If you can take some front on pictures before and after. Widening the stance makes these trucks look so much better. My truck is on the train and will be here between 9/16 & 9/23. I hope to have spacers waiting…

 

Definitely!! Post them up.

 

Might want to hop on it as BORA spacers are a 3-8 weeks out

 

I’ll order today after I see your pictures! I’m thinking 1.25” cause I’m going with 295/70x18’s which are 11.8” wide. Trying to salvage some mpg’s…

 

No show today. FedEx booo

 

Get these installed yet? Would love to see pics

 

these are 1" BORAs. With the TRD pro wheels and the 35x12.5r18 tires I went with, a 3/4" spacer would have been perfect. So my calculations were a hair off when I ordered the 1"

 

I think that’s absolutely perfect… already have my 1” sitting in the garage. Just need the truck to hurry up and get here.

 

Do you think the studs would stick out on the 3/4?

 

Is this lifted?

 

Any rubbing with the spacers?

 

yes it rubbed only after I installed the spacers, and only on the mudflap/felt. I trimmed both to solve the clearance issue and now it doesn't touch while braking/accelerating forward or backwards. Yes it has the Westscott TRD PRO lift. As for the stud clearance with the 3/4 spacers, it looked like it would work as the TRD pro have chunks cut out for some studs between the factory lug holes. One of the Pictures floating around on the web of the rear of the Trd pro bbs forged wheels did not have reliefs machined into the wheel for stud clearance. after I got my wheels off I noticed that they did indeed have the reliefs, so probably the picture was a prototype. Tundras have short studs and I don't think it would be an issue.

 

Do you have any more photos from other angles? It looks great.

 

Here ya go!

 

I just did a small 6mm shim on mine. Stock wheels with 35x12.5R18 tires. No lift. Fitment is perfect

 

Looks perfect.
What steps are those?

 

Those look to be the factory TRD steps?

 

Do all the Pro's come with steps!? Mine won't be here for another month, but that would be a suprise.

 

That’s correct. TRD steps.

 

Nah not all of them. Mine came naked.

 

Do they actually drop in without any modifications? Thanks

 

Yes.