2020 Sequoia TRD Pro Grill conversion

I have the Yotaleds in my truck, haven't had any issues with them so far. Their mounting plate and setup is very nice, and fits the grill perfectly. They also have the replacement LEDs very cheap, so if there are issues its a cheap fix. They look really nice, and the install is very clean. Time will tell if they hold up, looked far better than any of the other options I saw, which mostly looked jury-rigged...

 

What did you end up doing?

 

I was super tempted to get the Sequoia grill when there was a sale going on, but calmer heads prevailed. It didn't make sense to spend the money replacing a perfectly new Rock Warrior grill. Not many Radiant Reds in general to get much money back locally.

I did end up getting Sequoia lights and "color matching" the panels that go underneath them.

 

Got it done yesterday! Love the way it looks and thanks to all the help on here from everybody!!

 

Looks clean!

 

I have them too. Just haven't had time to install. Also have a trail cam to mount as well.

 

I've got a black 2016 as well! Would you mind telling me how you did this? The part here https://www.sparksparts.com/oem-par...e-midnight-black-metallic-pt3630c200bl?c=az0x doesn't seem like it'd be enough. Is there a separate moulding I need to get or something? Thanks!

 

All the part numbers are a few pages back.

 

Appreciate that, I just figured the guy who has the exact make, model, and color of my vehicle might save me the search through a 22 page thread.

 

Noob here. Can I install 2018+ headlights and headlight filler on 2011 Sequoia without any further mods? Do the headlight fillers come factory painted? Part numbers needed for gray filler.

 

is it necessary to buy more of the little yellow clips ? Do you remember which part they were if so ?

Thanks

 

One of these parts is the one you are looking for:
75819-33010 Side Molding Retainer Clip
53191-0C010 Grille Assembly Retainer

I had to look up my order. Let me know if this is not correct. But one of these two should be the part you are looking for.

 

When i pulled my old grill off, i only had 3 yellow clips installed on my hood, both on the outside corners and one in the middle. I added the ones that were missing. I ordered 5 when i ordered my grill in case any of them broke.

Part number is in the above post ^ # 53191-0C010

 

It has been a while since I put mine on.
But I am pretty sure I put them together and then put them on the truck.
I think that you can not reach the holes when it is on the truck.
I looked up my pictures and I go from grill off, cleaned entire area, replaced broken yellow tabs and then it shows the grill on. So I must have put both pieces on at the same time. But I do not remember for sure that was the case.

 

Slim is correct you need to put them together first..

 

Greetings.. just picked up my '07 Tundra. Where are you guys sourcing (good pricing) the grille at? I see Sparksparts.com no longer sells them. Any links? Much appreciated!

 

I can’t remember which dealer I got mine from, but it was one of these:

Sparkstoyota.com or McGeorgeToyota.com

At the time they had free shipping with code FREESHIP which saved about $85.

 

Thank you buddy! I'll call them up right now.. much appreciated!

 

Placed an order with Sparks last week and got an email saying it was cancelled this morning... Any other sites people use? Is there another grille like this that people are now sourcing?

 

Did you try McGeorge?? I don’t know any others.

Look through this thread and see if any other dealers/sites are mentioned.

https://www.tundras.com/threads/2020-sequoia-trd-pro-grill-conversion.55533/

 

@farnsrocket Yeah I just called my local Toyota dealer and they will not release the Sequoia grilles without a VIN number. And not only do they need a VIN number they need a picture of my truck, because the part is scarce. Pretty crazy, never heard of that before...

 

Wow that is crazy!

 

I have been looking at where I can get one of these grilles for my truck but I swear I cannot find where to actually buy one. And links anyone can send me?

 

Try SparksToyota.com or McGeorgeToyota.com………they used to have free shipping with code FREESHIP

 

If you search through https://parts.toyota.com/ they still have Freeship code for free shipping. The price is a bit higher than if you went through the mcgeorge parts store but with the free shipping it works out to be a better deal.

 

At parts.toyota.com it says the grille is no longer available.

 

All the all Tundra folks were buying them up!!! This is just another one of the long list of supply chain issues holding up new cars and parts.

 

Crap

i hit a deer in my truck last month and want this grille as a replacement

Does anybody know where i can source one??

Edit…..anybody have a sequoia TRD vin i can steal to order??? That’s what Toyota dealer is saying is required

 

Just in case anyone's curious, I have been doing some research and calling around and the grill seems to be of low stock probably due to so many Tundra and Sequoia owners (without the pro grill) buying them. Sparksparts was selling them and I think where most people on here were getting them, but they are currently unavailable and I emailed to see if they could provide more information and an if/when they may be available.

After calling my local dealership they said they are available for $500, but you have to have a Sequoia with a VIN that comes TRD pro grill, so I assume a TRD PRO Sequoia. Hopefully they come back in stock especially on sparksparts because at the time they were around $350 rather than $500 from the dealership. Maybe if someone has a friend that has a TRD Pro Sequoia they may be able to order one from the dealership for $500, but that seems to be the only option. I haven't seen any knock-off pro grills or else I would just order that.

I have seen some on eBay, but they are either out of stock or want $700+.

 

I just finished my update and have GOOD NEWS…one, it’s pretty straightforward and looks AWESOME…two, the TRD Pro Grill IS AVAILABLE from Olathe (Kansas) Toyota. They told me that they will “make it happen”!

As for mine, here’s what I did (note that there are additional numbers/letters that would be added to the grill part numbers for paint color if applicable):

1. TRD Pro Grill (2022) PT363-0C200
2. Grille Molding (for top) 53111-0C240
3. Fender extensions (below headlights) 53932-0C904 and 53931-0C904
4. Form Lighting LED headlights
5. Body color door handles and mirror covers (chrome delete)

And some notes/tips:

1. I had mine all painted professionally (thankfully have a friend) in Blizzard Pearl to match (grill molding already was available in Blizzard Pearl)
2. Form Lighting lights are pricey ($950) BUT they are self contained, meaning they have all the LED lights/bulbs in them and adaptors so they are plug and play (many you have to get adaptor plugs AND you have to put in your own bulbs). They also look OEM and have a cool feature where signal light does the “chase” as it’s going off.
3. I ended up buying two sets of the fender extensions (below headlights). One set I cut holes in for adding the headlight washers that were on existing. I then found a downloadable 3D print file that I got a local person to print the mounting “adaptor” needed. I ended up installing with the headlight washers but the cool thing is I could just swap out and put the other fender extensions on if I wanted (and the headlight washer would just be there behind once you remove the little cover). Of course you’d want to make sure to disable them or not push the button!

As for how “difficult” all this was…I’m simply a guy that likes to work on my own stuff. With help from forums like this, YouTube, Google, etc. I really think anyone can do about anything you need on your trucks if you give it a shot. Form Lighting shows how to do headlights, then Google for things like grill, door handles, mirror covers…really not too bad. Adding/modifying for headlight washers was most difficult part and I probably wouldn’t do it again, but it’s kinda cool to have a unique/rare “TRD Pro Platinum”.

Hope this helps anyone interested in doing it!