Door speakers not working after LOC install

Hello all, I just finished installing a Kicker LOC in my 2014 CM. Amp and sub work fine but I no longer have door speaker sound. From what I see the doors are powered via the factory amp under the passenger seat.
When I installed the LOC I used the wires in the harness at the factory amplifier for left, right and remote turn on.
Everything else is the same as it was prior to the amp/sub install.
Any thoughts as to why door speakers are now not working

 

JBL or Non JBL system..I made up a diagram when I did mine..
https://www.tundras.com/threads/wiring-diagram.62780/

 

Take a picture of your wiring.

 

Got it figured out. 20 amp fuse under hood was bad. It tested good with a multi meter and test light initially. Swapped it out with a spare and it all works now.

 

Welcome to the forum...

 

Thank you. I’m on my 3rd Tundra. Had an 03 with 180k, 04 with 240k and just picked up a 2014 CM.