2000 Tundra - needs replacement bed

Hello, 1st post to this forum.
I need to replace my entire bed and box, 6-1/2' extended cab SR5.
Do any of you know where I can find these? Thanks.

 

Pick and pulls / junkyards.

 

Bolts are Toyota p/n 641890C011 and run about $11-15 per this exploded, which states (8) bolts are required.

Truck bed is no longer available from the factory. Find used one (salvage). Key points:

• 2000-2002 Access Cab should be a direct swap, not sure about '03-'06.
• Double Cab beds are 2" shorter in length, possibly different width, and different fender flares; Regular Cab long beds are obviously too long.
• If you truck has fender flares, try to find a bed with one, it'll have the square holes for fender fasteners already there.
• If your truck doesn't have fender flares, just the opposite, try to find a bed without them, else it'll have square holes punched around the wheel.

 

Only access cab beds will work for an access cab. The only RC option was the long bed as they share the same wheelbase. Any bed from 2000-2006 first Gen AC should fit.

 

Shit, you're right. Editing post. For some reason I have it stuck in my head there's an RCSB and RCLB.

 

6 bolts for access cab bed. 8 bolts for long bed.

 

2007-2013 were the only years a RCSB was offered I believe.

 

I found a 2010 tundra box will it fit my 2000 tundra ? Both extended cab

 

If I go by what tonneau cover manufacturers are saying, then no.

 

Car-part.com, enter your year, make/model and cab size (4-door first option is what they call the Access Cab). Then “Body” then “Bed”; I came across dozens in my area (more front-end collisions than rear-enders). Many/most have pictures. Depending on where you are and what color you need, you might luck out.

 

2006 access cab bed for sale in my neck of the woods if that does you any good. Just saw it today on facebook. $650