1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1” front lift spacer!!

Discussion in '2nd Gen Tundras (2007-2013)' started by TundraTRD08, Jul 11, 2022.

  1. Jul 11, 2022 at 6:25 AM
    #1
    TundraTRD08

    TundraTRD08 [OP] Somehow I fit 37s on a level

    Joined:
    Feb 19, 2021
    Member:
    #59320
    Messages:
    196
    Gender:
    Male
    First Name:
    Wesley
    Arkansas
    Vehicle:
    08 Super White TRD Off-Road on 37s
    3.5' RC lifted struts with RC UCA Alcan rear leaf spring upgrade with 300lbs added weight+1" lift built in. Adjustable Alcan Shackles set to add an extra inch which equals to a 2" lift in the rear. 37” Maxxis RAZR M/Ts with 1.5” spacers 8” BAMuffler Tuned by Bully Dog Tuner
    Help! I cannot find a 1” strut spacer lift for the life of me! I have a 2” strut lift and was looking to lift it another inch after I ordered my new leaf springs (2-3” lift from them). I need another inch, or inch and a half spacer to put onto the existing 2” strut lift.
     
  2. Jul 11, 2022 at 7:05 AM
    #2
    Tundra234

    Tundra234 New Member

    Joined:
    Nov 30, 2018
    Member:
    #22402
    Messages:
    18,110
    Gender:
    Male
    First Name:
    George
    Florida
    Vehicle:
    2020 Tundra DC SR5 Barcelona
    Alot of them
    The spacers are not a 1 to 1 ratio. A one inch spacer will give you more than 1 inch. What specific strut lift do you have currently? You don't want to stack a lift.
     
  3. Jul 11, 2022 at 8:22 AM
    #3
    14burrito

    14burrito IG @14burrito

    Joined:
    Dec 14, 2014
    Member:
    #798
    Messages:
    3,813
    Vehicle:
    2014 SR5 CM 4x4 5.7
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
  4. Jul 11, 2022 at 8:48 AM
    #4
    TundraTRD08

    TundraTRD08 [OP] Somehow I fit 37s on a level

    Joined:
    Feb 19, 2021
    Member:
    #59320
    Messages:
    196
    Gender:
    Male
    First Name:
    Wesley
    Arkansas
    Vehicle:
    08 Super White TRD Off-Road on 37s
    3.5' RC lifted struts with RC UCA Alcan rear leaf spring upgrade with 300lbs added weight+1" lift built in. Adjustable Alcan Shackles set to add an extra inch which equals to a 2" lift in the rear. 37” Maxxis RAZR M/Ts with 1.5” spacers 8” BAMuffler Tuned by Bully Dog Tuner
    Currently has no spacers to lift it, this is also strictly the front. I have rough country struts with a 2” lift built into them. So, to clear things up, I’m not stacking spacers, just wanting to add one on top of the lifted strut, which has the same bolt pattern as stock. Then extend the diff drop and such.
     

Products Discussed in

To Top