Any experience with the built in 1 Touch Up & Down for window controls?

Got mine in mail yesterday and installed today. Big smile on my face now. Toyota really dropped the ball on the little things such as this. Pretty sad when a Prius has automatic windows and Tundras don’t. Might just be one of the best and easiest mods yet.

 

What color did you go with? Want to get something that looks closest to OEM

 

I originally ordered white but tried to change it to blue since other posts on this thread seemed to match better. Customer service was extremely responsive and said they would try to swap it to blue since it showed as already shipped. I will find out tonight the color so hopefully blue.

Edit: The switches are white which is okay, it matches the speedometer display and isn’t overbearing. Not sure how blue would be as far as matching/brightness but I am happy with white.

 

Edit: The switches are white which is okay, it matches the speedometer display and isn’t overbearing. Not sure how blue would be as far as matching/brightness but I am happy with white.[/QUOTE]

The blue set is nice (i have it) its not overbearing like the whites either. its a soft glow. I did the pass sets as well. so all four doors have this simple, overlooked by toyota feature.

 

I received mine in less than a week. Installed a few days ago. Really like them but I had an issue where the driver panel stopped working gor a few minutes then resumed working. Not sure what that was? Also, if you push the window lock and then push all the window switches down while locked they don’t go down which is good but as soon as you unlock the windows all your windows will go down without pushing any switches. I’m hoping for the best with these.

 

Update after less than 2 months, the window lock button took a dump and is broke in the on position so can't roll 3 windows down. I emailed the company asking for a return label and a replacement module. Will update what they do.

 

There's a timer around 1 minute I think where that will happen.

 

Ok so the company responded back pretty quick and seems to want to help but I hate how Chinese customer service always asks for a video of the problem. They never seem to get the attachment I put in the email.

 

They always want videos. Easiest way is to video it and put it on your YouTube account and send them a link to it.

 

Thanks I'll have to try that.

 

So they acknowledged the window lock issue from the video I sent and agreed to send me a new one for free. I'm satisfied assuming I get it lol.

 

I had to open a PayPal claim against them after They stopped responding to emails. The issue with the window motor being engaged for a full 6 seconds after the window has stopped is a major concern for me. And the fact that I bought an all blue lighted switch but there's a random red light on it.

 

Was that a defect on yours or did they say that's normal?

 

Don't know, they're broken ass English is hard to understand. The only thing that I got out of the conversation was that " i need not worry, as the power applied to the motor is relatively low " which is a plain, bold, straight up lie. There's a lot of power going to those window motors. That's why they require relays

 

Can anyone else confirm this issue? It has me worried now. I will have to listen to see if I can confirm if this is happening as well.

 

Read the thread. There's at least a dozen people who have all heard, felt, and seen the same thing I have

 

Mine does it. Not worried about it even a little though

 

I am going to time mine next opportunity I get, if it's more than a couple seconds I might sell it. I don't use the windows often enough to risk blowing motors.

 

My first one (that failed after 2-3 weeks wouldn't operate any of the other windows only drivers) didn't *over* engage the motor like is being reported. I received a new unit from CTH about a week or so after my first email with them (no video as I switched the OEM back immediately). It has worked fine for about a week or more and is also not *over* engaging the motor. Mine is white backlight, no red (not sure it makes any difference) and I swapped the 3 other passenger switches to full auto too. They have worked flawlessly from the initial delivery (and even worked when the OEM non full auto unit was back in place temporarily).

 

blue

 

Good to know that some of the switches do not over load the motors but with that, it makes me question the consistency of their manufacturing, but I would lying if I said I didnt expect that from a chinese product, even at over $80 bucks.

 

I was leery as well. Read the good reviews initially (on here, not their site) and gave it a chance. Again, I haven't had the overloaded motor thing with either unit, just the faulty first one that was replaced. I have a center console organizer that had an empty spot, so the OEM switch and a trim tool sit in there, just in case. I like the functionality, if this unit craps out again, I'll just go back to OEM and request a refund. hopefully I won't have to jump off that bridge though.

 

Yeah thinking the same thing. Good idea to keep the oem one in the truck too.

 

I took the kids to a drive through animal experience - feed the animals! Just not the zebras or the longhorns. Well the zebras get a little sneaky.... So there was lots of windows being auto upped and downed all day in some sweltering heat. No issues! Lock button worked well too when needed. I'll keep the OEM switches in the center console as backup if needed too but so far so good. I can live with timer delays issue for the price and overall increased function with lights.

 

That safari sounds fun!

 

Knocking on wood for the long haul - might seems to work essentially the same as the factory driver up/down, i.e no delays or motor running after it stops. Hope you all get your issues worked out!!

 

I installed mine last week, and I don't hear any window motor sounds once the window is completely up. So far so good!!!

 

I have had mine installed for about a week with no issues either. I did get a "Brake Override Malfunction" message on the dash when i went to test the driver's side rear door switch before putting everything back together (the message appeared when i turned the key to accessory and then went away when i started the truck). I have not had any error message sense and have not been able to recreate it.

 

I kept telling myself I didn't need this because I came from a vehicle with manual windows to the Tundra. After owning the truck for a little bit and realizing how convenient it is in my wife's car, I finally decided to get the module. It should be here this weekend, and I can't wait!

I'm glad these posts are showing some of the experiences people are having. Now I have an idea of what to expect.

 

I installed on all 4 windows, the grandkids had a field day with the 2 backseat switches, they each took 30 minutes of abuse on a ride from their house to the driving range, no issues as of yet. They have been in about a month now.