TRD Pro BBS Wheel Part Number

I personally love the look, and don’t off-road frequently enough (or on super intense trails) to be picky about the specs. So I will take anyone’s TRD Pro wheels off their hands to help them pay for a separate set - just throwing that out there

Hopefully someone will feel the same way about my 20” TRD Off-road wheels that I’ll be selling at a killer deal!

 

I like the TRD Pro wheels a lot (other than the price). Has anyone seen a picture of them on a non Pro Tundra? I am just curious on fitment.

 

Nice Ride…welcome to the Forum

 

Thanks! Loving it so far, did 250 miles on day 1 (yesterday). Just needs a few key changes in the appearance for me.

 

doesnt the smaller taco or 4 runner wheels (18") fit as well? I thought they had black ones that looked nice.

 

The older wheels have the larger 106.1 hub, which could be adapted to the 95mm size with a hub centric insert. But... they have M12 studs with an 18.5mm shank, whereas the Tundra has M14 studs with a 22mm shank. The offset is also less positive.

 

Oh baby…was completely surprised when I called the dealership and found out they were delivered after only 2 weeks. 295/70/R18 Wildpeaks + 2” leveling kit being installed in 2 weeks!!

 

Per my post above - I’ll have some pics on an Army Green Limited TRD OR for ya in a couple weeks

 

Very nice, please do share pics on the truck.

 

Here are a few pics of my Tundra with PRO wheels and Toyo AT3 275/70/18. Hopefully this helps anyone on the fence about buying these as they are expensive and will be a pain to keep clean. There are really not a lot of options for people like me who want a nice quality wheel and a close to stock offset and dimensions.

 

Damn, great wheels AND a tonneau cover…I’m impressed!

 

Nicest-looking double cab in Canada right there....

 

The wheels are pretty flush now, offset has gone from 60 to 47.5 and the wheel is now a 8.5 vs a 7.5 inch width. Fills the wheel wells just enough for my tastes, but everyone has different tastes

 

Thanks

 

Going to be awesome, nice tire and beautiful BBS wheels

 

Great looking rig man. Mind taking a side profile pic?

 

Agreed…100%! If only they made a DC hybrid.

 

Is everyone so set against running a smaller offset, i thought having rubber hanging out the sides is all the rage!?

That's to say, there is plenty of trd sema looking wheels out there. Assuming the well known Replika R213 17x8 +5 won't clear the hub/break bits, there are these!

https://www.wheeloutletnj.com/products/17-20-22-inch-toyota-4runner-trd-pro-wheels

Or does everyone really want 18" with 50mm offset... ?

 

I personally am at my limit with +12…that’s as much poke as I am comfortable with as any more and I would need those aftermarket fender flares.

Should these come in anything +10-ish and up I would consider getting a set of 17s

 

Haha I’ll take them for a killer price

 

Here you go, +15, consider away!
https://wheelsco.ca/products/trdto

Even if you get your set for killer price, scratching them / totalling them at 600 replacement cost is kick in nuts... A pair of these 200 knockofs, right on the money. Put savings towards some LT duratracs!

 

Will have an official for sale post around 7/6!

 

Did you use the factory lug nuts or did you order them? @Roman do you have the OEM part number for the lug nuts for the BBS TRD pro rims please?

 

Factory lug nuts.

 

I am just basing that off what happens with the 4Runners. Every 4Runner and Tacoma around here is running 4Runner TRD Pro wheels except the TRD Pro's it seems like. The TRD Pro's are running aftermarket wheels and suspensions, which ironically, are basically the only two things that made the TRD Pro unique in the first place.

Meanwhile, I scooped up the TRD Offroad wheels that some guy was selling after switching to TRD Pro's for like $300.

 

Really digging those wheels. Thanks for the part number.

 

The day is finally here!

 

Does anyone know if you can run 1.25” wheel spacers with the Pro wheels without trimming the lugs? Will the pockets on the back side of the wheel accommodate the protruding lugs?

 

figured I share, my local dealer have pretty good deals on everything. You can also get extra 5% off if you subscribe to email.

 

Another poster said the pockets are roughly 15mm on the Pro Wheels so I highly doubt you will have any lug protruding issues with 1.25" spacers. I don't believe the lugs on the last gen extended 1.25" anyway.