What have you done to your 2.5 gen Tundra today?

Right when I parked at work today

 

Looks so good!

 

Installed these Amazon black dash overlays. Fit and finish is pretty decent. At some angles silver trim are still visible but only if you go looking for it. Considering you don’t have to take the entire dash apart and they only cost 70 bucks shipped it’s something I can live with. Sorry for the crap pic, didn’t realize my camera lens was dirty

 

Not even broke in yet. Just hit the 200K mark on the wife’s 16 Limited

 

Looks great. Did you have to remove your Meso/AJT 4x4 knob to install?

 

Nope, everything slides over. I will warn you though the AJT vent rings do have to be removed to install and I snapped one of them in half so use caution when removing. Also the AJT rings are not compatible with the covers without trimming the rings. So also take that into consideration.

 

Installed new TPMS sensors in my BBS TRD PRO wheels today in anticipation of having tires installed on Wednesday. Evidently, there is a set of Toyo Open County AT3s in 285/75/18 waiting for me. Going to be a rather long few days!

 

Which sensors did you go with?

 

I think there’s a chance? But then at the spot I placed it, my truck would have to be submerged… then I’d be dealing with a hydro locked engine.

 

I went with OEM. After a good bit of reading, I think I've got the right ones. According to the owner's manual, I should be able to reprogram my truck to read them. Fingers crossed, electrical tape ready.

 

finally got an email that these are in, ordered. When I started parking in the new garage the tow mirrors were just to much so I went back to oem style. These are suppose to be a big upgrade on just the mirror glass, turn signal a plus.
https://spottermirror.com/p/toyota/tundra/2007-2021-toyota-tundra-spotter-mirror-with-turn-signal/

 

Installed a rear seat platform for the pups. Blanket is temporary until I have a chance to pick up another stall mat and have the legs Line-X'd. Storage area underneath allows me to slide in my Pelican Vault and keep it relatively concealed but still have easy access to it.

 

Did you already have turn signal indicators or did you have to wire them in? The videos show how to easily pop off the old mirror and snap on the new ones, but does not show the electrical connections needed.

 

I emailed the company asking about these for my SR5, this is what they said..

Hi, this mirror is not plug and play and requires tapping into two wires which may already be located inside the mirror housing or they have to be run from the door. Some of our customers already have them up and running and we are in the process of gathering information to create some instructions.

 

Finally did the rear bumper end caps on the wife’s truck today. Said no thanks to Spark’s $1007 price tag for plastic parts, in favor of OEM steel blasted and powder coated local. Turned out great, diggin’ em for sure.

 

Picked up some Pro Comp Pro Runner 2.5” coilovers. They’re brand new but a second hand sale I got for a steal at $450. Can’t wait to get them installed. Should be quite the upgrade from my 5100’s.

 

I love that you have the Cold Steel shovel ready to deploy. Mine lays on the rear floor but i never thought about keeping it in the sear pocket. Great idea!!

 

Is this the set of overlays from Amazon you got? (High Flying brand)

$86 HIGH FLYING for Toyota Tundra 2014-2021 Car Accessories Matte Blackout Center Console Air Vent Cover Frame ABS 3pcs

https://www.amazon.com/dp/B09KXZ741X?ref=ppx_yo2ov_dt_b_product_details
That looks nice in the pics. Thanks for the caution on the vent rings.
Seems alot easier than taking the dash apart. Plus you can go back to OEM when you want.

 

I've decided that I have a love/hate relationship with all of you on the forum. I love how every day you show me all the things I need on my 2021, but I hate the fact that you all keep showing me all the stuff I need for my 2021. Would have never known I needed the remote window controls, the diode dynamics yellow fogs, or even the front camera. Ordered the FRAC harness and these dash covers yesterday. Thanks?

 

Between 3 teams of kids baseball and bringing home firewood for next year's winter, my truck has been embarrassingly filthy lately. Since I'm now done with all that, I finally had a chance to give it a proper cleaning. Here's the outside and I'm almost done on inside.

 

Mine should arrive tomorrow

 

wires are in the mirror.

this is what I’m going off of for wiring

https://www.tundras.com/threads/2020-muth-signal-mirrors-install-wires-idd.96045/

more wiring info if needed

https://www.tundras.com/threads/side-mirror-connector-pinout-info.20631/

 

Unbelievable

 

here in suburb of Chicago its $6 a gallon and in Chicago almost $7 !

 

At this point I would be stoked to pay $4.69 in Cali

 

I just got back from cali last week. Def better to see the prices back in TX but it jumped 40 cents in the week I was gone

 

yes those are the ones I got, your thought process is the same as mine. I’m happy with the results

hahah trust me my fiancée is up my ass about it. I told her yesterday that I bought the rims and tires I wanted. Didn’t mention the fact I also bought 5100’s and a supporting order from coach builder to complete what I need. Needless to say I got the silent treatment last night

 

did you notice a big upgrade in sound quality? And is that the only speaker you have changed out?

 

Still cheaper than New York.