1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Do you have a touchy gas pedal?

Discussion in '2nd Gen Tundras (2007-2013)' started by azimuth, May 16, 2022.

  1. May 16, 2022 at 8:58 PM
    #1
    azimuth

    azimuth [OP] New Member

    Joined:
    Jan 2, 2021
    Member:
    #57015
    Messages:
    156
    Gender:
    Male
    Vehicle:
    2010 double cab SR5
    If yes, then the following may help. My 2010 tundra was very sensitive. I couldn’t really control launching from the line. Recently I nuked my mass air flow sensor. Suffice it to say sometimes I’m a dunce. Anyway I bought a Toyota replacement part and installed it. Once the computer and it learned each other the truck smoothed out. Lo and behold, the sensitive pedal vanished. Now it feels like it should and the line launches are gone.
    Just thought my experience might help others.
     
    Last edited: Jan 4, 2023
    RToad, STIFFRM316, Filthyphil and 3 others like this.
  2. May 17, 2022 at 12:32 AM
    #2
    Zoso

    Zoso New Member

    Joined:
    Jan 5, 2022
    Member:
    #72665
    Messages:
    68
    Gender:
    Male
    SE Georgia
    Vehicle:
    2021 Cement DC LTD
    My 2013 did. 2021, not so much.
     
  3. May 17, 2022 at 6:16 AM
    #3
    dels67malibu

    dels67malibu New Member

    Joined:
    Jun 2, 2021
    Member:
    #63805
    Messages:
    20
    Gender:
    Male
    Same here, changed mine out right away after buying it. It was way too touchy to make it drivable in traffic.
     
  4. May 17, 2022 at 7:15 AM
    #4
    COTundie

    COTundie Whoa Black Betty

    Joined:
    Jun 15, 2021
    Member:
    #64339
    Messages:
    961
    Gender:
    Male
    First Name:
    Trey
    Vehicle:
    Black 5.7 DC TRD 4x4
    Pretty things
    Changed out your MAF right after purchase, or updated gas pedal like many have done?

    When you say you "nuked" your MAF, did you cause its demise?

    Were there driveability issues before? (other than throttle response)

    If you physically damaged the MAF, then unplugged the battery to install a replacement, I wonder if the ECU reset/restarting the learning process has eased your touchy Go pedal without replacing the pedal like so many have done.

    Definitely keep us posted on any developments or if the truck reverts back to its previous state.
     
  5. May 17, 2022 at 7:32 AM
    #5
    dels67malibu

    dels67malibu New Member

    Joined:
    Jun 2, 2021
    Member:
    #63805
    Messages:
    20
    Gender:
    Male
  6. May 17, 2022 at 7:54 AM
    #6
    Tundra1D6

    Tundra1D6 Well that escalated quickly…

    Joined:
    May 23, 2021
    Member:
    #63426
    Messages:
    320
    If applicable you can remove the small shim for free.
    I did that in my 08 and saved 40 bucks.
     
    Filthyphil and baraynavab like this.
  7. May 17, 2022 at 7:57 AM
    #7
    RitcheyRch

    RitcheyRch New Member

    Joined:
    May 23, 2018
    Member:
    #15551
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Richard
    Santa Clarita, CA
    Vehicle:
    TRD Lowered & Supercharged Crewmax
    TRD Lowered and Supercharged
    My gas pedal is extremely touchy on my 2012 Tundra. I'm actually surprised that the TRD Supercharger ECM flash didn't correct the issue.
     
    Kerplunk likes this.
  8. May 17, 2022 at 8:00 AM
    #8
    dels67malibu

    dels67malibu New Member

    Joined:
    Jun 2, 2021
    Member:
    #63805
    Messages:
    20
    Gender:
    Male
    I saw a thread about that after I put the new one in. I also saw the service record where they put that spacer in, don't know why they did that.
     
  9. May 17, 2022 at 8:35 AM
    #9
    COTundie

    COTundie Whoa Black Betty

    Joined:
    Jun 15, 2021
    Member:
    #64339
    Messages:
    961
    Gender:
    Male
    First Name:
    Trey
    Vehicle:
    Black 5.7 DC TRD 4x4
    Pretty things
    I feel pretty happy with how my 2012 functions. If ya stab the pedal from a stop, she will leap into action for sure. But I usually drive the truck like a truck, and really ease into the accelerator for smooth, drama-free operation.

    Maybe I am compensating for this hyperactive pedal situation, but the truck seems easily capable of both smooth or somewhat violent acceleration.
     
    Ohannon7, Shuffler and Danny3737 like this.
  10. May 17, 2022 at 2:27 PM
    #10
    azimuth

    azimuth [OP] New Member

    Joined:
    Jan 2, 2021
    Member:
    #57015
    Messages:
    156
    Gender:
    Male
    Vehicle:
    2010 double cab SR5
    I nuked the MAF sensor by spraying starting fluid in the air box. I did that because one of my sons put diesel fuel in my gas can without marking it. I put that fuel in my truck. Truck died after a minute of idling. Thinking the fuel I poured into my tank must have been old, I squirted starting fluid to help it get going. Dunce move.

    After having installed the new one and experiencing the change in performance, it makes sense how the MAF could cause a drive by wire system to act poorly.
     
  11. May 17, 2022 at 3:34 PM
    #11
    COTundie

    COTundie Whoa Black Betty

    Joined:
    Jun 15, 2021
    Member:
    #64339
    Messages:
    961
    Gender:
    Male
    First Name:
    Trey
    Vehicle:
    Black 5.7 DC TRD 4x4
    Pretty things
    Ah yes. I remember reading of the incident.

    How many miles on the original MAF?
     
  12. May 17, 2022 at 4:39 PM
    #12
    Half Assed

    Half Assed me ne frego

    Joined:
    Jul 6, 2020
    Member:
    #48947
    Messages:
    830
    Heartland Florida
    Vehicle:
    Reg Cab Gang
    I kinda like the touchy pedal. You can scare passengers with it lol
     
  13. May 17, 2022 at 7:28 PM
    #13
    azimuth

    azimuth [OP] New Member

    Joined:
    Jan 2, 2021
    Member:
    #57015
    Messages:
    156
    Gender:
    Male
    Vehicle:
    2010 double cab SR5
    220,000 miles. Incidentally, I had a coil pack go out about 225,000 miles which seems about right for Denso coil longevity.
     
    Kerplunk likes this.
  14. May 17, 2022 at 11:30 PM
    #14
    Underdogg

    Underdogg New Member

    Joined:
    Nov 4, 2021
    Member:
    #70257
    Messages:
    60
    Gender:
    Male
    Vehicle:
    07 Crewmax 5.7L
    I have the touchy pedal issue too...
    I scare the crap out of people at the light when I suddenly start doing mini burn outs but still move at normal speed.
    I thought it had to do with the recalled pedal so I took it in and they refused to replace the pedal because I have aftermarket pedal pads. LMAO

    Just in case though, I cleaned my throttle body completely and I'm waiting for my MAS cleaner to come in
     
  15. May 18, 2022 at 6:29 AM
    #15
    marinakorp

    marinakorp New Member

    Joined:
    Dec 4, 2018
    Member:
    #22577
    Messages:
    136
    Gender:
    Male
    19406
    Vehicle:
    2010 DC 5.7 SR5 TRD Mica Green
    Tow Mirrors, Tekonsha p3, 12 v Solutions remote Start,Weather Tech Mats, Truxedo Roll up Tonneau
    YES - i added a Bully Dog Gt (used - so affordable) and also changed a few other things - mainly wanted the display of my trans and engine temps...so was an all in one solution...

    it tamed the jumpy start with the pedal...but it left the "tow haul" really sensitive (like it when towing and needing a launch at a start sometimes)
     
  16. May 19, 2022 at 4:04 PM
    #16
    baraynavab

    baraynavab Toyo Junkie

    Joined:
    Sep 12, 2020
    Member:
    #52130
    Messages:
    369
    Gender:
    Male
    Atlanta
    Vehicle:
    2007 Tundra CrewMax 4x4 5.7L V8
    Can you change the Gas Pedal feel or setting via TechStream?
     
  17. May 22, 2022 at 2:50 AM
    #17
    Larly5000

    Larly5000 Local Scumbag

    Joined:
    Jul 14, 2019
    Member:
    #33222
    Messages:
    243
    Gender:
    Male
    NV
    Vehicle:
    07 Crewmax
    Meh…I like the touchy throttle:notsure:
     
    MTRock likes this.
  18. May 22, 2022 at 4:38 AM
    #18
    jbrnigan

    jbrnigan New Member

    Joined:
    Jul 3, 2016
    Member:
    #3752
    Messages:
    186
    Gender:
    Male
    Midwest
    Vehicle:
    2007, 5.7L, 4x4, Crewmax,
    I can't say with certainty, but, I have explored almost every "customizable" function of Tech Stream and don't recall any setting having to do with the gas pedal - FWIW
     
  19. May 22, 2022 at 4:50 AM
    #19
    Rube207

    Rube207 New Member

    Joined:
    Sep 8, 2019
    Member:
    #35813
    Messages:
    454
    First Name:
    Rob
    Atlanta
    Vehicle:
    2010 Pyrite Mica Limited CM
    Same on my ‘10. Fixed the touchy gas pedal in about 5 minutes for $0.
     
  20. May 22, 2022 at 5:22 AM
    #20
    Wynnded

    Wynnded What MPG...

    Joined:
    Apr 20, 2014
    Member:
    #379
    Messages:
    5,055
    Gender:
    Male
    Rockies
    Vehicle:
    Souped up truck
    Magnuson Magnum TVS 2650 S/C Sniv's Speed Shop 70mm pulley RCF Throttle Body TRD PRO BBS Wheels TRD Front Sway Bar TRD Rear Sway Bar Fox TRD Pro Shocks Limited mirrors (auto darkening/backup camera/power fold/puddle lights) Limited Grill Mod Automatic Climate Controls Mod Automatic Headlamp Mod Sequoia Transfer Case Mod Sequoia Leather Steering Wheel Mod Sequoia Limited Gage Cluster Mod Sequoia LED Headlamp Upgrade Window Tint 15/70% Fake Manual Transmission Mod 10" BAMufflers Stainless Catback Valhalla Catalytic Converter Shields Engine Block Heater Illuminated Ignition Key Ring Mod Deck Rail System w/cleats Solid Offroad Engine Mounts
    No, but there is tuning software that can. Not an inexpensive route though.
     
  21. May 22, 2022 at 1:12 PM
    #21
    RitcheyRch

    RitcheyRch New Member

    Joined:
    May 23, 2018
    Member:
    #15551
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Richard
    Santa Clarita, CA
    Vehicle:
    TRD Lowered & Supercharged Crewmax
    TRD Lowered and Supercharged
    I wonder if there is a shim on my 2012.
     
  22. May 22, 2022 at 1:51 PM
    #22
    Kerplunk

    Kerplunk New Member

    Joined:
    Mar 25, 2022
    Member:
    #76356
    Messages:
    30
    Two nuts and a plug. Takes 10 minutes on/off to find out.
     
  23. Nov 24, 2022 at 10:52 PM
    #23
    LevelUp

    LevelUp New Member

    Joined:
    Nov 24, 2022
    Member:
    #87301
    Messages:
    76
    Gender:
    Male
    First Name:
    David
    Vehicle:
    2016 DCLB SR5 w/ TRD OR in MGM
    OEM LED headlights, interior ambient lighting, running boards, Firestone airbags, misc led swaps, started blacking out phase and chrome delete, Diamondback HD w/ Yakima Overhaul HD (on the way)
    My 2012 CM Platinum I had a few years back had a SUPER sensitive gas pedal. If I came to a stop sign for a quick stop and went to add a little gas to get moving again I would end up bobbing back in forth in the driver seat. The thing wanted to launch!! It was kinda cool at times.. I never used tow haul in that truck that I remember.
    Now after selling my recent Tacoma, I’m back in the 5.7. I got a 2016 dclb trd or. If drives fine but it’s not sensitive and launch hungry like my 2012 was.. so now I just drive around with tow/haul mode on all the time.
    Is there anyway to bring back that touchy launch gas pedal back? What are people doing with this shim? Maybe I can do the opposite.
     
  24. Nov 25, 2022 at 5:33 AM
    #24
    PhotoNerd

    PhotoNerd New Member

    Joined:
    Apr 6, 2021
    Member:
    #61465
    Messages:
    361
    Gender:
    Male
    First Name:
    Tony
    Waterford, CT
    Vehicle:
    2008 Salsa Red Tundra DC SR5 4x4
    Chrome delete, Sequioa grill, bed lights, LED + head, fog & tail lights, Dynamat throughout, front & rear cameras, Pheonix PX6 13" head unit, 8" subwoofer, JBL speaker upgrades, tonneau cover, custom shifter, steering wheel cover
    Look up throttle controllers like Pedal Commander or Bully Dog. You definitely don't want the Tundra with the bad pedal; it's not a sensitive throttle, it just makes the vehicle lurch with bumps.
     
    LevelUp[QUOTED] likes this.
  25. Nov 25, 2022 at 5:41 AM
    #25
    Ohannon7

    Ohannon7 New Member

    Joined:
    May 12, 2021
    Member:
    #62948
    Messages:
    212
    Gender:
    Male
    Central Fl
    Vehicle:
    2013 5.7 4WD CM Bench-Seat Silver
    6” Pro Comp 37’s Custom audio and interior Off road capability is current focus
    I thought the touchy throttle was a feature.
    I hear the 2.5+ guys saying they have to put it in Tow Mode to achieve the same acceleration program as the 2nd gens or use a programmer or something.

    after the lift and 37’s I think it’s perfect.

    I’m sure I could trash the gears in the rear if I stomped it all the time but I don’t. I never do. Eventually I may need new gear ratio but that’s a different story.

    TLDR - I personally don’t see an issue with throttle response.
     
  26. Nov 25, 2022 at 11:09 AM
    #26
    LevelUp

    LevelUp New Member

    Joined:
    Nov 24, 2022
    Member:
    #87301
    Messages:
    76
    Gender:
    Male
    First Name:
    David
    Vehicle:
    2016 DCLB SR5 w/ TRD OR in MGM
    OEM LED headlights, interior ambient lighting, running boards, Firestone airbags, misc led swaps, started blacking out phase and chrome delete, Diamondback HD w/ Yakima Overhaul HD (on the way)
    that’s because you have the 2nd gen with the launch pedal and after putting 37s on it, it brought back down to normal.
     
    Ohannon7[QUOTED] likes this.
  27. Nov 29, 2022 at 3:53 AM
    #27
    YouFallWeHaul

    YouFallWeHaul New Member

    Joined:
    Dec 28, 2021
    Member:
    #72360
    Messages:
    35
    Gender:
    Male
    Vehicle:
    2010 Marine Blue DC 4x4
    Is there a write up for this somewhere? I searched and did not see anything. Where is the shim? Thanks.
     
  28. Dec 1, 2022 at 9:00 AM
    #28
    Rube207

    Rube207 New Member

    Joined:
    Sep 8, 2019
    Member:
    #35813
    Messages:
    454
    First Name:
    Rob
    Atlanta
    Vehicle:
    2010 Pyrite Mica Limited CM
    I can't remember exactly, but remove the gas pedal assembly from the floor (maybe 3 10mm bolts?), unplug it, and flip it over. The pedal is a lever that presses a button, and the washer shim is between the pedal arm and the button. I seem to remember it being very obvious when I looked at it. Sorry I can't be of more help.
     
  29. Dec 17, 2022 at 6:46 PM
    #29
    GI Joe

    GI Joe New Member

    Joined:
    Nov 7, 2017
    Member:
    #10809
    Messages:
    108
    Gender:
    Male
    First Name:
    Joe
    Vehicle:
    ‘07 CM 4wd TuRD
    Might be old news, here is a vidja I found covering these shims… I too have the touchy pedal on my ‘07, and would like to calm it down(teaching my daughter to drive on it has gotten to her confidence a bit, with the unintentional burn-outs!
    It appears the shim is simply a way to cause more resistance(physical, not electrical) in the pedal, to make it harder to push, thus “easing” the jumpiness. I’m not sure how removing said shim would fix the touchiness…..‍♂️
    2:07 mark is when the shim action starts. No real explaination of how/why until then.
    https://youtu.be/b7BrCFiUvPo
     
  30. Dec 18, 2022 at 4:59 AM
    #30
    jbrnigan

    jbrnigan New Member

    Joined:
    Jul 3, 2016
    Member:
    #3752
    Messages:
    186
    Gender:
    Male
    Midwest
    Vehicle:
    2007, 5.7L, 4x4, Crewmax,
    Removing the shim on my 2007 SR5 did NOT improve the sensitivity of my gas pedal. Replacing the pedal with a later version - upgraded pedal, did (04000-0440C). The change wasn't "dramatic", but, enough to improve drivability.
     
    GI Joe likes this.

Products Discussed in

To Top