2022 Tonneau covers

Undercover Triad. It fits ok…. Could be longer over the tailgate. Installed in the rain so don’t know how it does in the rain yet.
I didn’t realize when I ordered it but they’re using the same p/n for the 2022 cover as the previous generation years so they probably didn’t actually change the cover for the 2022s. Maybe just updated it or the hardware supplied with it.

 

Here is a bit of detail missing from my previous post regarding the modification I did to fit the BillieBars with Rough Country Tri-fold hard cover.

 

I've been on a list as interested since August and confirmed I wanted a TRD Pro in December. I was first at my dealer for a TRD Pro but there's a chance my colour choice may have reordered my allocation order.

 

Installed the UnderCover Armor Flex, wish I could say the install was simple, but it was a pain in the butt. And it uses the built in utility rail but I can’t use the thing now for the bed cleats? ‍

 

Are you talking about the adjustable tie downs on the deck rail? Might post a pic about what you're referring to.

 

yes the bed rail with the adjustable bed cleats.

 

Agreed. I also placed an object in this space with success. Truxedo really does need to add a fix to the kit and offer it to customers that already purchased the ProX15.

 

I had that model of undercover with my last tundra. I was still able to use the adjustable tie downs. I had to insert the bracket that goes closest to the cab, then insert the tie down, then the next bracket, then the second tie down. You have to slide the tie downs back into the rail before putting in the rear bracket.

 

I’m interested in this as well since I was planning to order the Undercover Ultra Flex. I have it on my ‘21 F-150 and want it on my ‘22 Tundra. I wish it were compatible with both

 

The way the cover rails are, I don’t see how I can have one installed and still close the cover.

 

Could you post some pictures of the side rail connections?

 

I had the same problem with my new Retrax. I backed the knob off as far as I could so the t shaped screw was as long as possible and I was able to get the cleats in at an angle. It took some wiggling and it may work for yours.

FYI, if you get a Retrax and your tailgate won’t drop automatically try a little plastic safe grease on the seal. The seal is very tacky and catches on the tailgate without any lube.

 

I wonder if it would work if you installed the adjustable cleats before installing the tonneau cover. You’d obviously be restricted to where you placed them, but maybe that would work. I ask because I’d like to have them too once I get a tonneau cover.

 

Has anyone gotten the Bakflip MX-4 cover yet? I put my order in the first week of April, and have been delayed at least 3 times.

 

I’ve had 3 extang solid trifolds on my previous trucks. All worked really well.

question for the backflip/oem cover…. How close is the cover to the window when all folded up? Can I load my quad into the truck with the front tires up against it? Even though it was easy, it was still annoying to have to take the extang completely off the truck when putting the quad in

 

Oem cover.

 

There's your problem. You have to put the tie down cleats back on the rail before you put the last rail clamp onto the rail. Also, you have your cleat turned vertical, should be horizontal. I gaurentee it fits in there, had the exact same set up.

 

Heard back from Truxedo and they will be sending me some shims to put back there. Maybe theyll start including them with this cover because its a must

 

Good to hear. Please report back on the shims when you get them. Pics of shims and installed would be great too.

 

Well after my 3rd delay for the MX4, I called my local dealership and they had the OEM in stock. Paid $85 more than the MX4, but at least I was able to install it today and not have to worry if the contents of the back of my truck will go missing (and able to finally take it to the car wash) which I did yesterday. Some water did get in, maybe about 6-8 oz, but generally speaking, it kept it drier than the Retrax did on my previous Tundra.

 

It's the RetraxOne XR.

 

oh gosh.. i think that's a common problem for all track-styled tonneau cover...

 

I don't know, I didn't have a problem with my new one or my old one. This one retrax, last one an undercover.

 

as per the installation photos, the track which the cleats are mounted on, is overlapped by the side rails of tonneau cover.

so that should be a common problem for all retractable, roll-ups, and Bak-style tri-folds

 

It does over lap the rails, not arguing that, but my cleats move along the track fine. They came off while installing and went right back on with a little wiggle.

 

what would happen if the front tires of the quad were pressed up against that while it was open and being pulled into it being strapped to the bed hooks?

 

KB Voodoo Pro X crossbars installed with the Triad. Had to trim the weather stripping on the Triad around the crossbar brackets to let the tonneau lay flat on the bedsides.

 

For anyone thinking about the Bakflip F1, mine had a delivery date of today. I just received an email pushing it back to June 20 -27! I'm losing track, but I think this is the 4th delay. I'm assuming everyone got this or do I need to change vendors?

Update: in less than 24 hours from receiving the email indicating another month delay, I received another email today with a tracking number showing delivery on Friday.

 

just installed the same one today. Felt it’s a inch or two short. Thinking about testing it out at a car wash.