What have you done to your 2.5 gen Tundra today?

Got the multi color going on the cricut?

 

Starting to. It's more of different cuts and putting them together.

 

Ahhhh. Looks great!

 

So this happened today. Turned out to be a blown fuse any ideas?

 

Ebrake on?

 

I'll cut it tomorrow. It will look pretty nice.

 

Added Bilstein 5100s up front today. I like a little rake, but after adding RAS on top of the beefier rear springs, it was a bit too much. Kept the stock UCAs and set the 5100s on the middle setting (1.6” lift). My alignment guy tried to get the camber lower, but it was messing up the caster. With stock UCAs, this was about as good as he could get it. I really didn’t want to drop a bunch more $ for UCAs. It seems to track and steer fine, and ride is just a bit stiffer, as expected. Any thoughts from the group on the alignment specs? I’ll be going back for a follow up check after 1K miles. TIA

 

took some pictures of stuff completed over the weekend. Getting ready for camping/touring season. Added an 11-gallon water tank, Propane holder with etrack/bungee, and CO2 for air with some tools. hopefully this weekend I can finish some lights

 

Very nice!

 

It will look killer on the back glass of my MGM.

 

5100 level

 

Are those Falkin wildpeaks stock size?

 

Nice looking setup, I’m planning on something similar on my 2020 Platinum Crew. I like the idea of having most gear under a lockable cover versus the standard loon at me overland setup.

 

I have it in mind to black out the trim around the gauges (mine's a 2020 1794, and there's silver on the 'gear' trim around each gauge). Did your truck come like that, or did you paint it?

 

Mine's at 2.25" level, tracks ever-so-slightly right, and I also kept stock UCA's.

Your truck looks great.

 

I've heard from a few camry, rav4 owners about this- it usually happens when you have your foot on the brake and gas at the same time.

 

I think they talk about it in here and demo it on the Lexus IS 500
https://youtu.be/nY14E06Dku8

 

Wow this is great. Do you have a link for the propane tank holder? (Brackets and strap) Thanks!

 

@NIOSH how did you install the e-track base?

 

Nope

 

Mine came like this

 

Now the long, arduous trek over to ask Roman for a part number... (I'll look in earnest myself first)

thanks very much!

 

New tails. Replacement 3rd brake light is on the way.

 

Found these layin around, gonna black out them badges cuz red isnt free. Lol

I have never heard of Peel Coat so I am testing it in an area 1st.


Edit: Peel Coat just as good as plasti
The badges will be much cleaner. Thats only 2 fast coats.

 

Looks real nice. Love the smoked with the black. What 3rd brake light are you going with? I've been shopping around a bit and there's not a ton of options.

 

So I just clean em up real good, like 6 light coats, peel the excess, peel details with a toothpick, then BAM?
Whatd I miss and how bad am I gonna screw it up?

 

added baja ditch lights

 

This is a good reason EVERYONE should learn how to drive a manual transmission FIRST, to avoid, or at least greatly reduce this stupid practice.

 

The only people who should have feet on both peddles on a car with no manual clutch are race car drivers who are smart enough not to press down on both at the same time... lol