What have you done to your 2.5 gen Tundra today?

Congrats on the best mod there is!

 

I searched everywhere for someone who makes this for the decked drawer system with no luck. So I took it upon myself to make one.

 

What is it?

 

No problem ma’am.

 

It’s a sliding tray with cup holders.

 

You mean a center console?

 

But it’s a freaking sweet sliding tray with cup holders

 

Why did he suggest that?
The PRO comes leveled with stock UCA's
And a LOT of people go up to 3" with stock UCA's with no issues. I had ~200k miles after installing a 3" leveling kit on my 2008 with no alignment problems. Currently I've got the Westcott lift on my PRO and no problems with the stock UCAs either.

 

Got an alignment after my front bilsteins went on, drove it for a bit and the steering wheel wasn't quite centered. Took it back and got it fixed, how do these numbers look? First pic was first alignment, 2nd pic was after they fixed the steering wheel and is the current alignment

 

Decided to do Raptor style led lights on the hood bulge. Just trying to blend it with the amber step lights. (picture doesn't do it justice)


Here are the courtesy LED lights. Super bright.


Since Toyota shorted the Tundra on having courtesy bed lights, I decided to install some myself with a convenient on/off switch in the bed powered at all times.

 

Bout an hr to install, had everything in place and tight and test close was a fail (siderails spread too far apart) but its good to go now

 

Bed lights were included on my truck, might be a gulf state package with spray in bedliner

 

Best mod ever!

 

Haha just yesterday I pulled out of my in laws driveway ( dirt) and had my windows wide open, probably the first real time here in RI, and I could here the rocks ping pinging! Lol

i put them on in January and overall I’m digging them. I did stick with the 255/70/18 on my steelies only because I didn’t realize I could go up a size until after the fact. With that being said mine are D rated and save a few pounds and hoping they give me the extra side wall support when towing my TT.

@Tundra234 funny you mention balancing, I don’t do much highway driving and I noticed a wobble yesterday

 

MY APOLOGIZES A522467....... ( time for this old fart to get some new readers)

 

2 yds³ will fit

 

What exact model are these fog lights? Maybe you have a part number?

I'm trying to compare options on an exact match for the morimoto xb ambers

 

Has me scratching my head a little, too. Thank you for the first-hand knowledge.

The current alignment has me drifting ever so slightly right still, but numbers on the alignment sheet look fine (they're green, so wtf do I know...) and I'm sure I could get it dialed in a little better. I suppose even if it weren't in perfect geometry, the UCA itself would largely bear the brunt of any undue wear, and replacing the joints is probably a $100 problem. I'm apparently worrying about nothing, which is my normal state of existence...

 

My way of looking at it is this…

Will it align in “spec” with factory, yes. Will 3 degrees of caster added make it easier to get there, absolutely. Will the truck track better with the extra caster, also a very big yes. I guarantee almost everyone who says their truck is fine with oem uppers, if they tried them, would say the truck drives better with a quality aftermarket solution… given they get an alignment done by someone who understands what they are doing. That point is especially true with larger tires.

 

Use a dremmel to remove the plastic welds on the shiftgate. Make sure to leave the stems. Put the new one on and use some jb weld plastic bond to hold it in place

 

^

 

Installed Vleds for cargo light and 3rd brakelight and added the smoked lens from Klearz

 

No it’s not a center console. It’s a sheet of aluminum that I cut to fit into my decked drawer so when I’m sitting on my tailgate drinking beer doing man shit I have a place to set my beer or a grill. Basically turns one of my sliding drawers to a useable table that has storage underneath. Hope this better explains.

 

See if your tire pressure’s are where you want them. If a tire is low, it’ll pull a little.

 

How long after ordering did it take for you to receive the lens? Just ordered 1

 

Link?

 

Got my Yakima rack installed on my Diamondback and I freaking love it!

Also got my Boost Tow mirrors auto fold feature finished...bought an aftermarket switch from Amazon and hooked into the existing wire harness...the picture shows the correct positions for the yellow and blue wires that come on the mirrors...I had them backwards the first time and flipped them to where they are now and it works perfect!

 

I like to keep my vehicles stock but might need to get these! What brand???

 

Better pics with some light...