What have you done to your 2.5 gen Tundra today?

It is the short one with sunroof controls, but it does not say anything about a conversation mirror. None of them stipulate that, so the only way to know is to order one and take a look at it.

 

It is good, very well matched to the lifted coilover up front. I am also running TRD rear sway bar. I ran a few weeks with the new suspension without TAS, but with the RSB, ride and stability improved with RAS.

 

I really didnt have an issue with bed bounce before. The TRD OR shocks and rear swar bar I was running before was a pretty good setup.

 

3d printed a mount for my boefeng and stuck a mag-mount antenna on the roof. Much better range than using the little antenna it comes with.

 

I put some Amber Rigid plastic protector things on the Bifmobiles fog lights. Think they look kind of cool, heard amber is better in fog, and anything I can do to protect the lights is probably a good thing. Oh, they were also cheap.

 

what are your thoughts on the 5k HO 6LED bulbs?

Been debating on those and the V6 $140 reverse bulbs.

wondering if the V6’s are worth the extra $50, and they aren’t as clean of an install.

 

Looks good!!!

 

Few more pics since it's clean... At least for the next 24 hrs

 

I know you aren't asking me but figured I'd mention the reverse bulbs I've been thrilled with. They are the 1000 lumen GTR bulbs from Headlight Revolution. Mine are GTR's first gen (9 led) the newer ones are 15 led and rated at 1,200 lumens. I've had them for over a year, no issues whatsoever and insanely bright.

 

Is it worth it to you, is the real question. A 3 year warranty is good, and if you can stand a $140 bulb ($150+ after tax and shipping) only lasting you that long, it's probably worth it. Light output is twice what mine is, which is great. $5000k color temp will allow you to see more with the light on hand, which is great. Other than the risk of losing the money after 3 years, there isn't much drawback.

I paid $100 for the ones I have, and I'd likely have paid the $140 for the v6's if I'd had the choice at the time.

Reverse lights being brighter, at least to a point, is better. Lots of folks adding lumens to their brake lights and turn signals though; and I'm not a fan of that. It's not somehow safer to have more light than is necessary to alert other drivers; and as far as I'm concerned after you print shadows on the retinas of the old guy behind you, it's less safe. But I guess you didn't ask me that...

 

I have the Stage 1.

 

Muthco has the amber signal mirrors....about $200.00

 

I have the Stage 1 which is really bright as well. Use code New15 and you will get 15% off.

 

Are they just a standard lens with amber turn Or do they have wide angle mirrors with amber turns?

I have suma performance with the amber turn signals on my Tacoma and really like the wide angle lens. *Wide angle Convex*


Edit: I just looked they don’t. I thought they only had red which is why I didn’t look them up. Nice to see they DO have amber.

these would be nice. I do see in the notes turn signal versions are in development. That would cover all the things I’m looking for.

https://spottermirror.com/p/toyota/tundra/blind-spot-mirror-for-2007-2021-toyota-tundra-new-design/

 

Vinyl wrap on hood to accent Inferno color and reduce glare

 

it's been a while

Two years on the dot, the battery in my 2020 took a shit. Much needed / wanted upgrade finally accomplished.

 

Did not do much to it this week…. Just a couple low key mods

 

Some paint and switches.

 

Sure. Here's a photo of the driver's side. Hope it helps.

 

Mollie attachments to driver side: fire extinguisher with mount, clip and lock.28” flexible traction rubber recovery Mat with bag/gloves, Velcro and locks. Other side is my 8gal pressurized water tank

 

Ordered a Blue Sea remote high-amp battery disconnect for my incoming winch, and a custom SPDT momentary switch for activating it. And some additional components for my planned Switch Pro wiring project. Once the winch arrives, I’ll start laying everything out - hoping to relocate the control box up near the battery as well.

 

I would check for tread separation and if they look good take em.

 

Does anyone have theyr CB mounted overhead? All this talk about conversation mirrors has me looking at that overhead console a whole new way.
Something like this would be badass

 

what is that over the tailgate gap? I need that.

 

https://rokblock.com/

 

Although it's probably not necessary, I would in fact suggest a diff drop kit. Anything, even a bit of 'drop' helps those CVs. Anything around 2" or more of lift is recommend a diff drop

 

Set a new PR this morning

 

You haven't had that$150 fill up yet? I cant wait till its over $200, that'll be so awesome!!

 

Y’all gonna be catching me over on the Vespa forum pretty soon