3rd Gen Accessory Thread

I've read every available thread thus far on em and while I'm not looking to go Raptor and TRX hunting, the reasonable HP bump is enough to keep me interested.

 

Perhaps I should have researched before ordering, but can anyone confirm if the OEM hard tonneau cover is compatible with the factory rail tie down system?

 

Yes

 

+60 hp (if to be believed) added to 389? not including added torque? I think it's def worth it

 

It is, saw a fb post earlier this morning so i saved the pictures. Looks like everything mounts above the factory c-channel rails. I'm looking to install the oem tonneau too.

 

I know there is the Magnuson-Moss Warranty Act, but won't a tune void the warranty on the power train? When I was truck hunting before I got my 22 Tundra I was looking at the TRX, but after a quick cost analysis of what it would cost me to just drive every year I decided to pass lol.

 

It does they don’t come with directions there’s a Set on here I actually printed off. You actually remove the rails install the covers rails and then install the accessory rails on top of that. Pretty simple.

 

The Raptor and TRX have all the cool hot rod sh!t we'd all love to party with but at the end of the day they're both still a Dodge and a Ford which is destined to become a problem. Even with teething pains the 22 is having it's definitely going to be a much better truck, in every metric in both the short and long term. I'll take coming up short in the HP wars to keep 80%+ of my resale value should I ever need it down the road.

 

If you zoom in and look closely you will see the factory rails below the Tonneau rails (held together by those machine colored brackets if you will).

It all works together very well

.

 

A search of the forum is always helpful too.

Check out the install instruction thread on the Forum. The instructions show you how to the OEM Tri-Fold Cover relocates the existing bed rail system using the included mounting brackets.

Link to the instructions thread: https://www.tundras.com/threads/oem-bed-cover-install-instructions-downloadable.100722/#post-2664578

On a side note: If you end up getting the cover, be sure to download these instructions since OEM accessories rarely include any type of installation instructions. Toyota assumes you're going to have a dealer install the option for you. haha

 

On the extender. I just picked one up with no instructions or template. I don’t see a ready made spot or slot at first glance. Where did you bolt in the two brackets? Appreciate any info as you’ll save me a little head scratching when I get back to it.

 

Added the new 2022 front Weathertech floor liners yesterday. They won't look this nice for long!

Where are the rear liners, Weathertech?

 

THe brackets go under the rear most cargo hooks inside the bed

 

Pics of where the brackets go, one installed, one not.

 

Not sure if I’ve seen this posted here yet, but seat jackers are available for the ‘22 Tundra now.
https://desertdoesit.com/collections/toyota/tundra-2022

 

Thanks…I need these (one thing I miss from my 2015 the most as my wife can barely see over the hood)

 

Do the bed extender brackets have a quick release feature that allows you to disconnect the extender, flip it around, and insert it in the brackets again inward into the bed without having to rotate it upward to lift out of the brackets?

This was an optional feature on my aftermarket F150 extender that was a necessity to make it compatible with my tonneau cover rails. Curious if the Toyota extender also has a way to make it compatible for install in the inward position.

 

confirmed. Just installed mine

 

I really like how integrated the OEM cover looks. If you have a moment, would you mind taking a photo of how the drainage is ran? I have the BAKFlip MX-whatever on my 2.5 gen and hated how they suggested you run the drain. Ended up bodging up my own way, but it still doesn't look great. Thanks!

 

Sorry photos were not mine. I stole them off facebook. My tonneau is still on order.

 

Anyone find good seat covers? Clazzio and Northwest don't have the '22 Tundra listed yet.

 

Yes, it just flips 180deg to sit inward or outward. If you lift it about 30deg it will simply pull out of the brackets if you want it removed completely. My wife leaves it flipped inward to keep groceries from careening all over the bed and I flip it out whenever I'm hauling bikes and cant close the tailgate.

 

Katzkin has the 22' Tundra! I'm gonna go that route once my bank account recovers from the wheels, tires and lift. I was quoted about $2,050 installed with black leather with red perforated insert and red stitching. I also ordered some off Amazon for $132 to get me by but they said fits 08-22 so I don't have high hopes that they'll actually fit right. They show up today so I'll post an update on fitment later this evening.

 

Thanks for the document. That sucks worse than what I had on my current truck. Maybe I can figure out something better.

 

Brutal….hahahahaah

 

I was also
Quoted the same thing

 

Exactly what I said. I could not believe the have the fronts done but could not be bothered to do the rear. Just lazy

 

C4 told me their parts wouldn't be available until May. FYI I'm working on developing a set of sliders with RSG offroad in Colorado currently. They'll be built off my truck then produced.

 

Did you notice a difference with the TRD filters? I'm throwing them in tomorrow.

 

Are they just OEM branded K&N filters?