What have you done to your 2.5 gen Tundra today?

I got around to wiring in the rear camera for my dash cam. It was easier than anticipated, I didn't have to fully remove any of the trim to get the wire back there. I just pulled down on the rubber door seal instead. Since the rear window rolls down, I used this product to mount it and it works exactly as advertised.

https://www.thedashcamstore.com/custom-folded-bracket-for-secondary-dashcam-lenses/

 

I get that but if there is affordable parts that still looks good id like to not over pay for parts cause my 40k truck still has to be paid off along with raising my children

 

If not ebay has anyone tries the ecoological parts do they match well or hold up

 

I saw a post a while back where someone modified the swing box bracket to still fit the tie downs. I thought about doing it, but haven’t decided yet.

 

Use the search bar.

 

Ecoological are pretty well rep'd here. I believe quite a few members do use those caps.

 

Yes, I saw that also. I considered grinding the bracket but the likelihood of me needing those tie downs is equal to the forward speed of a swallow in a 60mph headwind.

 

70 degrees in VA and the rain stopped early so I got her washed.

 

what about sub-par decals on a $40k truck?

 

Installed the front bumper guards that came with the super bumper.

 

Red Raptor liner on the front tow hooks.

 

Hahaha. Took me a minute. Well played.

 

Did you sand them down first?
Did you prime them?
How many coats of red?

 

Here a pic of the puddle lights. Someone asked me to show the brightness of the new LED cargo light housing I installed recently, so got the shot and the puddles come on with the dome lights and cargo light and fade out same.

 

I totally agree, it’s not for everyone. I didn’t like it either

 

i ordered the 2" - how dod it work for you?

 

Wow I’m loving this!

 

Sanded with 120 grit, primed with some metal etch primer I have, and then 2 coats. Done. It’s very messy.

 

I trimmed a little bit off because I wanted it tucked up as high as I could but I only took off maybe 3/4”. Getting the 2” one is the right move.

 

Nice lookin' truck man... that boat looks pretty awesome too.

 

New shoes... 275/70 r18 on Methods.

 

I bought hood bulge Sunset Mica Bronze. Took awhile to figure out what was wrong. It did not have that flake that shines when the sun hits it also would not stay on properly when driving 65 plus. So I bought that then bought one from Sparks.

 

Finally completed the chrome delete on my 2020 TSS Crewmax SR5; I went with the TPO finish from Ecoological on the hood bulge and grill surround because I wanted a unique look that i have yet to see on another Tundra.....Headlights were changed out about a month ago and are from Rockauto, FYI....

 

Haha! The Vader thing is actually the cover for my airpods. It keeps them from getting all messed up at the gym.

 

No the door handles on my limited were super easy. Just pop the rubber grommet that covers the hole on the side of the door, Unscrew the t30 screw, then pop out the locking mechanism and the door handles just slide towards the hole then come out. Super easy. There are a few youtube videos if you want to see it.

 

I like it, very stormtrooper-esque

 

Do you have a closeup pic of that bracket tucked into the headliner?

 

Not really today but less than a week ago. Meso chrome delete and new shifter.

 

Selling the TRD handle??