What have you done to your 2.5 gen Tundra today?

I may split it up if no one wants the set. I actually have an extra (used) black 4x4 badge I could send you for free that was given to me that I didn't use. Just needs new 3M mounting tape.

 

Looks great. Were you able to take off the front door handles without removing the inner door panel? Unless you don't have the touch unlock feature...

 

2022 TRD peddles, only had to drill for the parking brakes right in the center and trim a little of the back side top rubber trim.

 

Finally had an off weekend so I got to do truck stuff.

Yesterday I redid the lighting in the bed since a bunch of the LED bulbs burned out. I had to redo all of it since the new lights strips had different connectors than the older lights despite being the same brand. Then rotated the tires and change the cabin air filter.

Today I did my first oil change (dealership did all the previous ones) and thanks to the knowledgeable folks here I bought all the cool stuff to make it easier. Replaced the engine air filter and topped off the windshield wiper fluid. And finally installed the Valhalla Shield that I got in December. Some piece of mind with that installed.

 

I like, where did you get them?

 

I like those. There was a time they had similar ones for the Gen 2

 

Mounted the tri-color emblem here.

 

Ok cool. Keep me posted if you decide to spit them up.

 

Yup now that the new 22’ Tundras have them. It’s back in style…hehe

 

OEM? Can the Toyota ones be retro fit?

 

I’m sure the dealership has them, but might be $$$ versus Amazon $$. I had the same ones on my 07’ Tacoma

 

Amazon

 

I found what I think are the right ones, but it says Camry and Highlander?

 

Yes make sure the gas peddles are the same type and only the parking brakes needs slight mod to it, nothing complicated just drill the center using the back center hole as template and drill to the size of your bolt. I found the same size as the rubber circles and got the black hex bolts

 

Where did you get the TRD badge?

 

Behind you? Come on man. Just do it. You deserve it

 

@Beer Man its never too late to turn it up!

 

I bought the TRD badge from @twintundra31719 maybe he can chime in where he bought it from. It's very nice quality and I'm really happy with it.

 

tacos4cheap

Color matching TRD grille badges | Tacoma World

 

Thanks for posting the link. I do recall seeing "Tacos4Cheap" engraved into the plastic retainer now that you mention it.

 

Seems extremely counter-intuitive.

 

Yep!

 

so what did you do with the SDHQ sliders

 

@DuneShoot took the SDHQ sliders back in November.

 

Installed replacement running boards so the wife can get in easer, plus they look better then the last ones. New ones are Steelcraft. Plus added assist handles in the back. Seat jackers next up on the block. No pun intended.

 

Time to empty the trash can

looks good though

 

Lol, did that after the pictures.. lol

 

Yes, the door handles were super easy to take off. Just one t30 screw and then they slide and come off. The badges were a different story

 

Finally had time to put the Morimoto fog lights on.

 

Got puddle lights installed. Tapped them into the useless little footwell light, so they turn on unlocking and when doors open, fading out with the dome light. Discovered that the dome light fuse is always under power as I had first tabbed into that fuse, so seems the dome lights are switched on the ground end. Easy access from cab to underbody via gromet that sits straight under the white holders of the door jamb panel.
Can't wait for it to get dark so I can check them out. Don't mind all the salt, has been a rollercoaster of deep freeze and snow recent days.