What have you done to your 2.5 gen Tundra today?

I think they call it the SR5 Upgrade Package

 

Think youre right.

 

this weekend is looking like installs of Bakflip MX4 I got off offerup, and a Rago dashplate!

 

The armrest should have been embossed with TUNDRA right there. That looks great.

 

Really like the RAS system! I’ve never seen these springs until your post. Did some reading and I’m thinking of picking up a set. Is there a way to adjust the portion that you bolt on so that you avoid the rear lift? I already have 2 or so inches of rake and don’t want to add to it if I can help it @Hightide

 

Thanks. Been playing with the Cricut machine. The goal is to possibly sell them if there are interests.

 

Audio wise, I can definitely tell a difference from the factory HU. My intention is to upgrade the whole audio setup over time, but for now, just having wireless android auto and screen mirroring makes the purchase worth it.

 

Played some more...

 

I like the one on the armrest. Is it a single piece or is each letter applied separately ?

 

Looks good, I wonder if silver letters would give it an embossed or almost ghosted look, and maybe slightly smaller?

 

Installed this dashcam today, sans rear camera (that’ll get done tomorrow). I thought the idea of the adjustable internal camera is neat and could potentially be useful in some situations.

VIOFO T130 3 Channel Dash Cam Uber, Built in WiFi and GPS, 1440P+1080P+1080P Three Way Triple Car Dash Camera, IR Night Vision, Supercapacitor, G-Sensor, 24 Hour Parking Mode, Support 256GB Max

https://www.amazon.com/dp/B09D3GN2P1?ref=ppx_pop_mob_ap_share

 

I can try it we can see.

 

They are individual letters but you use transfer tape to install it as one piece. The machine does all the spacing automatically.

 

.

Guys, I don’t know what sorcery they’re using, but these things freaking rock!

I could literally notice a difference the minute I pulled out of my driveway.

No bed bounce.
No wobbles.
No sag.
The truck honestly drives like a nice car.
I actually hate that I didn’t get these sooner.

If you are on the fence about these, pull the trigger.

If you don’t know about these, find out, then pull the trigger.

Absolutely, one of my favorite mods!



Mine are HDs.

 

If you do the armrest, you should use reflective vinyl. It would act as a reflector when the door is open at night.

 

Just make sure you have enough posts.

 

I am leaning toward getting these more and more, especially since I want to run a diff skid and will lose my sway bar. When the RAS website is talking about load between the standard and HD springs as more or less than 600 lb constant load, they are talking total load right? Like passengers included or just load in the bed?

 

Lol....my post count is almost at 50 lol.

 

well keep posting

 

I agree. One I get a few projects cut I'll create a post for them with different options.

 

OEM AUDIO PLUS JBL UPGRADE WITH DUAL SUBS
ANYTIME FRONT AND REAR CAM
RAGO DASH
MESO MAP AND DOME

 

Love to hear the review on the audio upgrade.

 

Same. How was the install?

 

you can set them at 25%. The white disc the provide as gauge is for 25%. It will not lift your truck much.

lol, I was saying same and people don't believe me. This exceeded my expectations big time. I even dare to say its a totally different truck now empty and towing.

 

Busy day but I got the main wiring done for my footwell LED's. Have still to tap in the passenger side LED. The footwell lights run when Taillights are on ( when dark ). My Dome LED's are so bright that I don't need extra footwell lights when opening the door. I plan to install puddle lights running off the dome light fuse.



Quick question: When I took apart the dash underneath the steering I found a plug that I dot know what it is for. Its close to the Tire sensor reset button. Also, what is that small opening in the dash for? There is nothing there on my SR5. Does that opening has anything to do with the plug?

 

Our trucks are pre-wired so there quite a few unused plugs. Those openings are usually used for microphones towards the top of the truck and glass breakage sensors on the lower panel of the truck.

 

There are extra plugs for sure, you can see the dummy plug where it "plugs in" above the your tire reset button harness.

The little vent is for vehicles with automatic climate control, there would be a temp sensor in there and a tube that runs to the heater core or someplace down there.

 

How bad was your bed bounce? It take it all away?