22 Tundra Rear Springs vs Land Cruiser 200

I’m trying to find a rear spring spacer for the rear of my Tundra. Is it true that a Land Cruiser 200 spring has the same dimensions as our 3rd Gen? I haven’t found anything on it but maybe y’all can help.

 

I've been wondering this as well and have even reached out to Dobinsons and Adventure Motors but no response. I wish Westcott would sell their kit parts broken out.

I'm sure in due time we'll be seeing rear spring spacers all over the internet for cheap like the 4runners.

 

Somewhere on this forum someone said that they were (taken with a grain of salt) and that Westscott stated it. I looked through some of their videos but I didn’t get that information. I could have missed it of course, but maybe someone will chime in.

Of anything I’ll probably order what I want and try it. It’ll either fit or not LOL. I’m just trying to save the time

 

I just picked up some front 3/4" lift spacers from Torq Engineering for mine and the guy there mentioned he thinks the rear springs are pretty close to the sequoia? Wish I had my truck I'd grab some spacers off Amazon and try them out. I don't suppose anyone wants to take their brand new truck apart to grab some measurements? ha ha ha

 

Sounds like I’ll have to experiment!

 

I have a 200 and a pair of rear spring spacers sitting in the Garage i can take measurements of if it would help.

just let me know what you need, exterior diameter, interior diameter....

 

if you could grab the inner and outer diameters of the top of the spring that would help with lining up a matching spacer. Maybe grab the total length too for a spring replacement? And I guess the bottom ID and OD, just all the things. Lol. Thanks!

 

So I've heard the below Dobinsons' part numbers are what other Tundra owners have used for shocks and springs (note these are LC80 parts that fit the Tundra, not actual Tundra parts). Extended brake lines and bump stop extensions were required. Yields roughly 2" rear lift. These are for the 80 series land cruisers so I'd assume the 30mm spring spacer would work as well and then use fender washers or similar 1/4-3/8" spacer to space the rear shock like Westcott does.

Rear Springs C59-169
Rear Shocks IMS59-60687

 

Here's a couple rear options that should work.

https://ironman4x4america.com/rear-...80-100-series-land-cruiser-lexus-lx450-lx470/

https://www.vividracing.com/-p-152743370.html

 

Awesome thanks for the information!

 

Keep us posted on fitment if you try one of those out! I'd jump all over them but I am still 3-4 weeks out for my truck. What are your plans for the front?

Here is another option on Amazon but the ship time is pretty long.

$127 Tema4x4 Rear Coil spacers 30mm for Toyota Land Cruiser 80 1989-1997 Lift Kit

https://www.amazon.com/dp/B07M9MG5Z9/?coliid=I34X1WIZI9KQWA&colid=2BM7SF9RGWMJW&ref_=lv_ov_lig_dp_it

 

I’m not doing anything fantastic honestly. I just want it to sit like my leveled out 21 Silverado. So I’m doing a 2” in the front (old Gen spacer) and approximately .5” in the rear so it has a subtle rake. Even though most won’t be able to tell the difference. I believe that’ll look good with the 20x9 +10’s and 275/60

Now that my truck is back from the shop. I just need this stupid Texas ice to go away so I can start the leveling kit.

 

I sold all my springs, so no first hand measurements, however I did find the dimensions for the tough dog springs i'm running now (949L listed below) they are a lot taller than stock, but the inner/outer diameter is the same.

the spring diameters and spacers are the same for the 80's, 100's, and 200 series cruisers.

spacer dimensions, ID 133mm, OD 188mm, spring OD 177MM, spring wire thickness 19mm.

 

Just in case you wanted spacer dinensions, or you prefer English measurements, here are the diameters of 30mm spacer (black) and 10mm spacer (yellow)

 

So do you guys think an air bag kit from a land cruiser 200 kit would work? I actually have the kit and gonna try and install Tuesday

 

following

 

I wouldn’t know. Some parts from the Land Cruiser 200 to the 80 interchange. Most people are saying the 80 rear spacers work on the Tundra, which I’ve seen the 200 listed as the same. Do the bags go inside the spring like the Firestone bags? If so the only issue you may have is if the spring lengths are different between the Tundra and 200

 

Are the tundra springs longer or shorter than the land cruiser
Thanks

 

Idk, I was just throwing my two cents out there. I’ve been so busy I haven’t even ordered the rear spring spacers to know for sure how big the springs are

 

So how much lift would a rear coil spacer of 30mm give? 50mm?

 

It is a direct lift so 30mm spacer gives you 30mm lift. Not like the front.

 

30mm is equivalent to one inch and that’s approximate

 

I’m thinking about trying these out short term. I have a Prescott front coil over on order which lifts 3” and looking for 2” in the rear. I’m ok with a forward rake as I’ll load up the rear. This is all a place holder till more options come on the market. Anyone try 2” rear? I’m assuming extended rear brake lines are needed

$152 Rear coil spacers 50mm for Toyota LAND CRUISER 80 1989-1997 Lift Kit

https://www.amazon.com/dp/B07MNK1LN1?_encoding=UTF8