Chrome Delete Covers for Tundra Bumpers - BumperShellz

Looks Great!!

 

@EC1 Any tips for parking sensors? I‘ve redone the passenger side front twice and still get the constant on red line warning. Does the dimple have anything to do with this, should I shave the clip down to reduce the dimple?

 

shoot me pictures of the bumpers, and I'll see what's going on. With how they fit now, you shouldn't have to do that unless the tape touched down a little early. Sanding down those white spring clips might be the fix regardless, but I just want to make sure we have any underlying issues taken care of.

 

The new style of BumperShellz is definitely harder to put on the for the Front. It's one of the sacrifices we had to make to ensure the there wasn't any chrome showing between the black center valance, and the side edge pieces of the bumper. I think it was the right choice, because it looks almost completely factory now, but it takes a 20 minute job and turns it into an hour, so that's definitely a con. PM me pictures of any part you want me to take a closer look at.

 

Material is shipped finally! We should have it in late next week, and we'll start forming right after we get it.

 

Is there currently a lead time on the ABS paintable bumpershellz? I ordered middle of last week and it said ready for shipping. My card was charged but I never got a confirmation email or anything. I also sent a message via your web form Wednesday but didn't get a response to that either. I'm starting to get nervous. I wouldn't be bothered if it's just lead time, but not getting any information scares me.

 

Did you call and leave a message with your order number? I was having pretty significant issues with my order and I left a message and got a call back about two hours later.

Plus I sent a PM to EC1 here and got a response. They immediately made it right for me and were super apologetic.

 

Bah! I missed them. Do you have plans for more?

 

There is a lead time on all the orders right now since they are partially made-to-order. A couple months ago it was about 3-4 weeks, but we've been able to get that down to 1-2 weeks for almost all orders. If you send me a message with your order number, I'll find out exactly where it is in the queue. Calling customer service might be faster, just because I end up going awol frequently lol. It should be going out soon though if it hasn't already. I just looked at when you actually posted this, and I really hope someone was able to get you some information because I just realized I am waaayyy late on this

 

Hi EC1,
I had emailed your company a few weeks ago, and did not receive a reply. I did get my name on the waiting list. But can you tell me if ecoological will be selling the chrome delete cover for tundra bumpers any time soon? I know this is old thread, but was hoping for good news. Thanks!

 

messaged you!

 

Sorry EC1, all I am seeing is "messaged you"?

 

This is what I am seeing on the website. It appears orders are being accepted, but cement sold out right now, correct?

 

What's the lead time looking like for front and rear tundra covers in 1G3? I submitted to the waitlist, but am curious if there's any better information.

 

Better get to work on making overlays or whatnot for the new gen.

 

Anyone know if they're planning to do another run of the MGM 1G3 colors in the bumper caps?

 

I finally put mine on today. Those bolts really suck to get to. My hands will be hurting tomorrow for sure.

As far as fitment goes I didn’t turn out perfect, but the directions were good. They’re certainly not coming off & the chrome is gone, which is all that matters!

Are the covers supposed to tuck under the fog light trim? I don’t see how that’s even possible if so. Fuck it, it is what it is. It’s not perfect, but it’s my truck.

I might have broken a sensor while I was trying to jam them back in. Real pain in the ass that was. Oh well, I’ll let the next owner worry about that, I don’t use them anyways.

 

The fog bezels stay behind the covers so you got that right in case you were worried about that. It looks like you have a slightly older model of our cover. The install on that one is slightly easier in some areas, and slightly harder in others from our new version, so I take full responsibility for your hands lol. It looks awesome though! I think you did a great job fitting that version, and I'm guessing you had a local shop paint them and the paint match looks great. Cement is a beast to color match, so hats off to your body shop!

 

We're on! Here's the link to the OEM color match page for the MGM's
https://www.ecoological.com/store/c7/Toyota-Color-matched-overlays

 

Toyota needs to be a little less stingy with their CAD data haha. They give nothing up. We had to tear a truck apart and 3d scan the pieces

 

Back in stock! https://www.ecoological.com/store/c7/Toyota-Color-matched-overlays

 

MGM's are back in stock BABYYYYYYYYYYYY!
https://www.ecoological.com/store/c7/Toyota-Color-matched-overlays

We did also just upload a few CEMENT, but those rarely last longer than a day so hop on those asap. We are starting to do regular runs of Cement beginning this week, so look out for more inventory to be added in the couple weeks. We'll mix some other colors in there as well. I know we're about to run a test set of Army Green.

 

Thanks.

I probably do. I ordered them in July & got them way back in September ha

 

Gonna keep ya busy

 

When will front and rear bumpershellz w/o parking sensors in 218 attitude black be back in-stock?

 

Hey guys trading in my 2021 CM for another one so will be selling my end caps and hood bulge surround because I never got around to installing them. The front and rear bumper end caps are in the black TPO and the hood bulge surround are in Midnight Black metallic #218. I’m sure shipping will be crazy but I’ll let you guys know when I post them for sale in case anyone is interested.

 

Finally got the chrome delete completed on my 2020 TSS Crewmax SR5. Bumper covers, hood bulge, and grill surround are all from BumperShellz; I went with the TPO finish on the hood bulge and grill surround because I wanted a unique look that i have yet to see on another Tundra.....Headlights were changed out about a month ago and are from Rockauto, FYI....

 

@EC1 -
Is this the part of the clip you cut down to relieve the dimple.?

 

Looks good!

 

I always miss the cement color when it's available