Laxani rims

I'm new to rims I just ordered these from carid. They say it will fit but I want to make sure. Will this fit on my 2016 tundra?
Also will my truck drive better if I go with a positive offset? I come from the factory tss 20 rims
Here are the specs:
20" DIAMETER (20" x 9")
[+15 to +45 Offsets, 5x108-150 Bolt Pattern, 74-110.3mm Hub] more details on - https://www.carid.com/lexani-wheels/vertigo-gloss-black-2292958264.html

 

Not sure what you bought spec wise since you didn't post that. But looking at their website, those don't come in the bolt pattern for the Tundra (5x150).
These are the bolt patterns they says its available in:
5x108 / 5x110 / 5x112 / 5x114 / 5x115 / 5x120 / 6x114 / 6x120 / 6x127

 

When I check it says 1 ×150????

 

I see what your saying where it says x108-150. It might have duel bolt patterns under the cap but hard to say without seeing that. As for riding better offset won’t really change much. The biggest difference you would notice would be going with more rubber and less rim but since your staying with 20’s don’t think you see any noticeable changes.

 

This is what it looks under the cap.

 

Glad it has the right bolt pattern. I struggled with their website so was looking at two 3rd party sites but was getting the same info on both which is what I posted. Which offset did you get?

 

I think +35

 

So they should stick out about .1" more than your TSS wheels.

 

Just curious tried Google couldn't get a clear answer do you know what the load rate for one rim for the 2016 stock tss wheels?
I looked on the back of my new rims and it says its 24,000lb weight rating per rim. I tow every 1-3 a year about 7-8500 lb